March SWISSTOOL Madness
-
Last night we had a beautiful fog roll in off the lake.

Of course the DAK Spirit had to get in the spirit the moment.
.
All that fog left behind some wonderfull mornig dew as a back drop for the BSA Swisstool


-
Day 9 of 30
Chisel was used today to scrape paint away from window borders

Only Tools Matters
-
Day 9 Awled nail holes through plastic duct

-
Day 9
Mail duty today.

-
***Day 9 : ***
No use for the Spirit today, so here is a 'no use picture'

-
March 10:
A bit more yard work today, but no uses. I'd say it feels like Spring, but we're expecting some snow. Actually.....yeah...it feels like Spring.

-
@magentus said:
Still off work and had a bit of a relapse (more coughing and sneezing) - going a bit stir crazy and the battery of my car was depleted as I haven't used it for the past 3 weeks. Neighbour helped me out with his power bank and I risked a trip out to let the alternator do its thing. Thanks neighbour!How nice of them!

@jnoxyd said:
Day 9
Not serious work just new microwave opening ;)

Maybe not serious, but very important. :D

@Douglas said:
Last night we had a beautiful fog roll in off the lake.

Of course the DAK Spirit had to get in the spirit the moment.
.
All that fog left behind some wonderfull mornig dew as a back drop for the BSA Swisstool


Look at those fog, epic! And lovely BSA Swisstool as well!
A bit more yard work today, but no uses. I'd say it feels like Spring, but we're expecting some snow. Actually.....yeah...it feels like Spring.

Maybe we will see a Spring chicken dish sometime?
:D -
Day 9

-
Day 9
Used the Spirit to assist with some paracord work, cutting an apple, opening a box; but I liked the glamour shot taken while walking Fisher outside the Vet better.
-
Day 10
Used Swisstool to open the battery compartment for the reading pen, I was wondering whether Swisstool has the appropriate small screwdriver for the job, and surprised to find out how well the small flathead has worked, just like how can opener fine head would work as impromptu phillips in 91mm.

-
Mags, Fuzz and Douglas - well spotted, and thank you! 55 yesterday, another year older, but none the wiser!
Day 10
Early delivery this morning, and Spirit XBS’s blade came in handy to cut the sellotape seals on my latest acquisition- another Spirit, but this time the plus with ratchet!

-
@Rizio Il Ghiro said:
Mags, Fuzz and Douglas - well spotted, and thank you! 55 yesterday, another year older, but none the wiser!Day 10
Early delivery this morning, and Spirit XBS’s blade came in handy to cut the sellotape seals on my latest acquisition- another Spirit, but this time the plus with ratchet!
One day late, but happy belated birthday to you! Hope you'd have a good celebration. :D
Btw, love the new Spirit with ratchet, making it a wholesome carry.

-
+1 Rizio!!
-
Thanks Comis and Barry - it was on at the usual suspect for just over half price, so I couldn’t resist! Once the challenge is over, it’ll get a permanent place in my work bag - despite doing a desk job, it’s surprising how often a solid multi tool comes in handy! Plus that Spirit blade doesn’t shout knife like the one on the XBS. I’ll have to see if I can’t use some red Humbrol enamel to jazz up the badge later on.
-
Nice one rizio - the Spirit is a work of art. Happy 55th

-
Happy Birthday Rizio

-
Happy birthday Rizio!
[It's not failure if you learn something from it]
-
Day 10 - I tried to use the saw but I had to use the bigger gasoline brother or I will saw until end of days

[It's not failure if you learn something from it]
-
Many thanks indeed, everyone! As promised, I’ve had a go at jazzing the new Spirit up with some red Humbrol enamel (left over from a bicycle restoration I did in 2016) no 19 red gloss. I thoroughly cleaned the area around the shield and logo on both sides with acetone, stirred up the enamel well, painted over the area with the logo and shield on both sides, propping the tool so that neither painted area touched the deck, left to dry for 90mins, wiped the excess paint off with a taut rag over the finger almost dry yet moist with acetone, and rubbed off the excess paint leaving the areas filled in with paint. It’s a method I used in my teens and beyond for picking out logos, lining cut-outs, etc on cycle components. Same process as for those using nail varnish I’m sure, but hopefully the enamel will be more durable in the long run.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
