March SWISSTOOL Madness
-
Day 13 - a tap handle in our lab broke yesterday and there was no way to get a new until next week. It was the small plastic tabs that are suppose to lift the inside of the valve that broke.. I found a paperclip that I figured might work.. In the pic I haven't pushed the clip all the way in, I did that in the lab when mounting it back. Not pretty but it did work and now we can have distilled water again. Awl to make the holes and pliers for the rest

[It's not failure if you learn something from it]
-
Day 13
Whilst doing some ironing this morning, the iron conked out. Socket is ok, so next check is the fuse which looked fine, so I used the fine screwdriver on the Spirit to lever it out, swapped a new fuse in, and indeed it was a blown fuse - phew, no need to get a new iron - that’s an expense I could do without what with new SAKs due out soon - a question of priorities!! Speaking of new knives, did anyone fork out £539 on the Damascus santuko? Way outside my budget!

-
@kottskrapa said:
Day 13 - a tap handle in our lab broke yesterday and there was no way to get a new until next week. It was the small plastic tabs that are suppose to lift the inside of the valve that broke.. I found a paperclip that I figured might work.. In the pic I haven't pushed the clip all the way in, I did that in the lab when mounting it back. Not pretty but it did work and now we can have distilled water again. Awl to make the holes and pliers for the rest
[It's not failure if you learn something from it]
Great work, Macgyver!

-
@Rizio Il Ghiro said:
Day 13Whilst doing some ironing this morning, the iron conked out. Socket is ok, so next check is the fuse which looked fine, so I used the fine screwdriver on the Spirit to lever it out, swapped a new fuse in, and indeed it was a blown fuse - phew, no need to get a new iron - that’s an expense I could do without what with new SAKs due out soon - a question of priorities!! Speaking of new knives, did anyone fork out £539 on the Damascus santuko? Way outside my budget!
I think I saw that ad in my mailbox and I didn't even bother to open it...but £539 on the Damascus santuko by Victorinox?! Why would anyone pay that instead of getting a high-end authentic Japanese made for 1/3 the price?
-
@Rizio Il Ghiro said:
Borg- my rhubarb is looking unseasonably good too! Can’t wait!I couldn't wait either :D i only took one per plant so they will be ok, best to leave them a bit yet though

Me too, good for you too

Absolutely, just go outside and pick a few, no transport costs

Day 13 no uses today and i don't foresee any, lazy day

-
14 day
Mod finished

-
I agree! Nice job!
-
Jnoxyd - looking good - show us more!

Comis, I agree bonkers price, but they’ve sold out on the UK site! My 20cm Miyabi cost me £100 (half price deal), so not sure why this one costs so much....
Kottskrapa - good fix, you’ll have to let us know how it holds up!

-
I will! Unfortunately I'm not allowed to take pics in the lab so you will have to take my word on it. But so far so good, next shift that works night can on the other hand be a bit ruff on the equipment so I guess we can se that as a test
[It's not failure if you learn something from it]
-
Swiss Fuzz Day 13
Quite a few uses today from chopping an onion for a pasta sauce to fixing a guide line for my stone dyke etc, but... I neglected to take any pics. So here's some nice daffies instead...

-
@Rizio Il Ghiro said:
Day 13Whilst doing some ironing this morning, the iron conked out. Socket is ok, so next check is the fuse which looked fine, so I used the fine screwdriver on the Spirit to lever it out, swapped a new fuse in, and indeed it was a blown fuse - phew, no need to get a new iron - that’s an expense I could do without what with new SAKs due out soon - a question of priorities!! Speaking of new knives, did anyone fork out £539 on the Damascus santuko? Way outside my budget!
Excellent post.

-
Day 13 of 30
Used phillips to tighten my daughters helmet screw, putted bit blue loctite cause screw seems to loose bit in use but not anymore.

Only Tools Matters
-
@Antti Lammi said:
Day 12 of 30Used Seraated blade today to cut frozen gargo straps, i didnt want to cut those but had to cut cause otherwise our gargo wasnt going there where it suppose to. Hate it when first rains water and next day it freezing outside.

Only Tools Matters
Swiss Tool? Correct.
Does it have plain edge spear point as well?Barry’s has a model with a rescue style SE blade.
Now curious as to the model number of your SwissTool because I do like the Victorinox spear points with SE.
Thank you Antti in advance.
-
@Loopcutter: I wish I had the box my friend. Would it be anywhere on the tool?
I'm really liking edc'ing this tool. I just might have found my new companion!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:D
Hit the wrong autofill. The things that happen on nightshift 
