March SWISSTOOL Madness
-
Day 15 of 30
Half way, used flathead to open batterycover of my radio earmuffs.

Only Tools Matters
-
Day 15
Mail duty.


-
Day 15
-
Day 15 -
At the Y, was removing old style Hand Sanitizer Wall Dispenser with a new style Foam unit.Tried removing old unit’s double sided tape with the Spirit’s Chisel, unfortunately it was not right tool. 1st the cutting edge is not same edge as the handle so I could get it flat the wall, 2nd it was just to short.
So had to use my small pry-bar.


-
<u>**Day 15 : **</u>
Half way through the challenge, but France started to take real action : full State lock-down.
So, here is a pic of the Spirit not in use : never spicy enough !

-
Are we really half way already? You guys are AMAZING!!

Well I decided to mark the event with the first eddition of the Swisstool the 1997.
Still solid as a rock and works just as good as any of my latest editions.
Replaced a thermocouple, cleand a pilot orfice and adjusted the pilot valve on a flat top grill today but only managed a pic of staple pulling duty.
DAY 15

-
March 16:
No uses for me today. Not sure why not....seemed busy enough.


-
Day 15
Some minor Spirit use to include opening a dog treat, but no picture of that because the blade bit me and decided to clean-up before popping open a beer.

-
Day 16 - I have been sorting batteries in nice sortiment boxes so that they don't short out while waiting to be used or when they are used but I thought about these button batteries and then I remembered that we hade some foam left from another project my wife did. Used the knife to cut to right size and then the scissor to cut slots for the batteries

Forgot to take pics of me making the slots but this is the results

[It's not failure if you learn something from it]
-
Day 16
No use for Swisstool today, pretty slow pace overall.

-
@kottskrapa said:
Day 16 - I have been sorting batteries in nice sortiment boxes so that they don't short out while waiting to be used or when they are used but I thought about these button batteries and then I remembered that we hade some foam left from another project my wife did. Used the knife to cut to right size and then the scissor to cut slots for the batteries
Forgot to take pics of me making the slots but this is the results

[It's not failure if you learn something from it]
Nice idea, I usually just keep it in its original package so I know they are new.
@Sos24 said:
Day 15
Some minor Spirit use to include opening a dog treat, but no picture of that because the blade bit me and decided to clean-up before popping open a beer.

Was it from closing? Or from using tool from left hand?
@Douglas said:
Are we really half way already? You guys are AMAZING!!
Well I decided to mark the event with the first eddition of the Swisstool the 1997.
Still solid as a rock and works just as good as any of my latest editions.
Replaced a thermocouple, cleand a pilot orfice and adjusted the pilot valve on a flat top grill today but only managed a pic of staple pulling duty.
DAY 15

I think the pliers look better back then, got all the branding and logo right on the pliers head.
@Fuzzbucket said:
Swiss Fuzz Day 15Stones... Stones... Stones-stones stones stones...

Still messing with the stone? How's your rabbit foot doing?
-
@comis said:
Nice idea, I usually just keep it in its original package so I know they are new.Was it from closing? Or from using tool from left hand?
I think the pliers look better back then, got all the branding and logo right on the pliers head.
Still messing with the stone? How's your rabbit foot doing?
Same here, the foam are for the used ones and the used batteries are in a smaller sorting box to I have to remember recycling them
[It's not failure if you learn something from it]
-
Kottskrappa - great idea for battery storage, More nice pics and uses!
Day 16
Used the Spirit’s chisel to slice the tape on a just delivered post item - contents came from Germany, a harvester se. I like the dove etched onto the blade, but not so sure about the scales with peace in various languages on them- might remove the blade for a future mod, but not sure for now.




-
Thanks Rizio! More pics in general or my battery storage? [emoji6]
Aslo, that's one of the coolest harvesters I have ever seen
[It's not failure if you learn something from it]
-
Day 16: tightened a loose handgrip for Mrs R!

-
@Douglas said:
Are we really half way already? You guys are AMAZING!!
Well I decided to mark the event with the first eddition of the Swisstool the 1997.
Still solid as a rock and works just as good as any of my latest editions.
Replaced a thermocouple, cleand a pilot orfice and adjusted the pilot valve on a flat top grill today but only managed a pic of staple pulling duty.
DAY 15

Nice 1997 SwissTool! BTW how many of them were made?
-
Day 16
What antivirus diet do you prefer?
Be healthy guys!

-
Same to you my friend!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

