March SWISSTOOL Madness
-
Day 19
After dinner it turned out we only had one piece of chocolate wafer coin, had to split it with the Mrs.

-
Finally been able to catch up. It has been a great challenge with good uses so far!

-
Some great uses and nice pics.
Day 19
Been using the back gate a lot to avoid people and noticed today that it seemed a little loose so used the phillips driver to tighten some screws.Also used the metal saw/file to cut a screw that was sticking out of a board and file down to make smooth.

-
Great job Sherry! I find that I spend a lot of time doing the same thing in this old farm house.
-
Day 19
A shot with an orchid that is beginning to flower. -
Day 20
Cutting open life elixir packet is a really important job for my Swisstool, more than anything now, chilling with a cup of coffee (or tea) is probably what I think is a wise thing to do.

-
Day 20
Post duty once more - that chisel point is so good for slicing sticky tape! The equal of the alox awl, though the alox is a bit more pocketable! A couple of greens I’ve not tried before and a novel brush from Da Vinci - just need to find a bit more time to get my paints out again!

-
Day 20
Spirit killed some Corona viruses today ( or something looks very similar [emoji847])
-
Day 20: Cooled off quote a bit from yesterday! Took the dogs for a walk and came back for some warm coffee. An old habit from my time in the Army are the Tasters Choice instant coffee packets, one of which I opened with the Swisstool scissors.

-
Day 20 - lots of yard work today as well.. Spring as finally showed up and with this Corona thing we take good care of the time spent at home before the new baby comes. Didn't take that many pics of me using my spirit but I got one opening a spray can. When I was cleaning up after we were done I decided to give my old shuffle some treatment with sanding and a paint job instead of being rusty and patches of paint

With primer

With focus on my plier

Being done fast and outside I think it turned of ok
[It's not failure if you learn something from it]
-
Day20 -
The Y told me yesterday that part timers were no longer required, till the shut down is lifted.So I started sorting down down some boxes from my career job that I spent 25 + yrs working, throwing out many subjects of files, and then encounter my little car collection that was displayed on a lateral file cabinet.
I was surprised by the number but then this carton surfaced.
PS: used the AWL to cut the tape!


-
Day 20
Shiney. -
@LoopCutter said:
Day20 -
The Y told me yesterday that part timers were no longer required, till the shut down is lifted.
Very nice!!!So I started sorting down down some boxes from my career job that I spent 25 + yrs working, throwing out many subjects of files, and then encounter my little car collection that was displayed on a lateral file cabinet.
I was surprised by the number but then this carton surfaced.
PS: used the AWL to cut the tape!
-
Good pics everyone

Day 20 New pair of trousers which means i need to sew a button above a pocket for the Mora sheath, Swisstool took care of the threads


-
**Swiss Fuzz Day 20 **
Got quite excited earlier - found a mass of deer tracks not too far from the house... then remembered a Farmer's flock of sheep escaped earlier in the week...


-
<u>Day 20:</u>
Mad project of the day : filling an empty Tabasco bottle with fine sand
But, being lock at home forces some creativeness !
1/ made a funnel with rolled plastic sheet cut from a water bottle, hold tight using duct tape
2/ made a sieve by piercing holes into the bottle cap + screwing it on the cut bottleneckSo after some time sifting sand, little by little, I finally filled the bottle to the top!


-
Day 20
Parcel opening, my new - and first - G-Shock arrived today. Also used the large flat driver (again) to pry open a very tight pulltab on a beer can (not pictured).


-
Day 20 of 30
Used flathead to open my Zippo so i could change new flint to it.

Only Tools Matters
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

