March SWISSTOOL Madness
-
Day 20 - lots of yard work today as well.. Spring as finally showed up and with this Corona thing we take good care of the time spent at home before the new baby comes. Didn't take that many pics of me using my spirit but I got one opening a spray can. When I was cleaning up after we were done I decided to give my old shuffle some treatment with sanding and a paint job instead of being rusty and patches of paint

With primer

With focus on my plier

Being done fast and outside I think it turned of ok
[It's not failure if you learn something from it]
-
Day20 -
The Y told me yesterday that part timers were no longer required, till the shut down is lifted.So I started sorting down down some boxes from my career job that I spent 25 + yrs working, throwing out many subjects of files, and then encounter my little car collection that was displayed on a lateral file cabinet.
I was surprised by the number but then this carton surfaced.
PS: used the AWL to cut the tape!


-
Day 20
Shiney. -
@LoopCutter said:
Day20 -
The Y told me yesterday that part timers were no longer required, till the shut down is lifted.
Very nice!!!So I started sorting down down some boxes from my career job that I spent 25 + yrs working, throwing out many subjects of files, and then encounter my little car collection that was displayed on a lateral file cabinet.
I was surprised by the number but then this carton surfaced.
PS: used the AWL to cut the tape!
-
Good pics everyone

Day 20 New pair of trousers which means i need to sew a button above a pocket for the Mora sheath, Swisstool took care of the threads


-
**Swiss Fuzz Day 20 **
Got quite excited earlier - found a mass of deer tracks not too far from the house... then remembered a Farmer's flock of sheep escaped earlier in the week...


-
<u>Day 20:</u>
Mad project of the day : filling an empty Tabasco bottle with fine sand
But, being lock at home forces some creativeness !
1/ made a funnel with rolled plastic sheet cut from a water bottle, hold tight using duct tape
2/ made a sieve by piercing holes into the bottle cap + screwing it on the cut bottleneckSo after some time sifting sand, little by little, I finally filled the bottle to the top!


-
Day 20
Parcel opening, my new - and first - G-Shock arrived today. Also used the large flat driver (again) to pry open a very tight pulltab on a beer can (not pictured).


-
Day 20 of 30
Used flathead to open my Zippo so i could change new flint to it.

Only Tools Matters
-
Day 20
A picture from a walk around the neighborhood.
-
March 21:
For some reason or another, I thought the Swisstool was going to be put into action today. I'm sure I had a specific task in mind......but it's now late and....no uses today.


-
So many more great uses. Hoping many more keep coming. This Madness brought on by Covid-19 has reduced my normal work activities thus making good action shots more of a challenge. Bussinses is unbelivably slow due to all of this and although it provides more time at home the weather has been cold wet and dreary. I'm thankful for all of your upbeat posts. Stay safe and keep it up everyone.
DAY 20
Panel install with the Aussi NATO.

-
Day 21
Wife was busy making garlic bread when I sneaked into the kitchen pretending I was going to be helpful, she knew far too well I was only in for finding use for my Swisstool, so this was the picture I managed to take before I got kicked out.
:D
-
Parcel opening, my new - and first - G-Shock arrived today. Also used the large flat driver (again) to pry open a very tight pulltab on a beer can (not pictured).
Enjoy! I love G-shock, been wearing it for many years and definitely one of the most reliable watch out there.@Borg said:
Good pics everyone
Day 20 New pair of trousers which means i need to sew a button above a pocket for the Mora sheath, Swisstool took care of the threads


That's awesome, you are the first I've seen to mod pants to fit knife, instead of the other way around.

@Douglas said:
In these interesting times I find comfort in the stability of being able to count on my Swisstools.
DAY 19
Used my NATO Down Under to remove the scissors from a doner SAK.

What are we making? -
@m47mu74nt said:
<u>Day 20:</u>Mad project of the day : filling an empty Tabasco bottle with fine sand
But, being lock at home forces some creativeness !
1/ made a funnel with rolled plastic sheet cut from a water bottle, hold tight using duct tape
2/ made a sieve by piercing holes into the bottle cap + screwing it on the cut bottleneckSo after some time sifting sand, little by little, I finally filled the bottle to the top!

What are the sand for?
[It's not failure if you learn something from it]
-
Good work everyone! I agree with the questions above

Day 21
Used the SwissTool Spirit blade to open up some more Lavazza qualità oro beans - beauty shot with coffee paraphernalia and Rizio enjoying the cappuccino after!


-
Veeeery civilised.

-
@comis said:
That's awesome, you are the first I've seen to mod pants to fit knife, instead of the other way around.
I don't like things hanging off my waist so used to clip to the inside of a pocket, a lot of times it would fall out so started using the button clip thing, the whole lot fits nicely in a ruler pocket so i sew a button there, nice and secure and easy to hand, when i pull out the knife the sheath stays where it is, work trousers btw, i don't go round with a fixie 
Day 21 Might as well have this as the daily pic too seeing as i'm not going anywhere today

-
Day 21
Bonus materialMy Swisstool and me knows the importance of showing up at the right place at the right time...

-
@Fuzzbucket said:
Veeeery civilised.
Indeed, very posh!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

