Soldier 30 Day Challenge
-
Starting off day 1 with opening up some tuna

-
Day 1
New month, new challenge.
It felt awkward to leave the CT34 behind this morning - it has really grown on me recently. The only Soldier in my collection - and therefore my only comrade during this month of May - is the GAK.
I used to like and carry 111 mm SAKs quite a bit, but by now I am firmly footed in 91 and 85 mm territory and suspect I might consider the 111 mm line too large for EDC. Alas, on account of my being stuck at home most of the time, this challenge might not produce an answer to this question, but let's wait and see.
The other two problems I have with the 111 mm SAKs are that you are not allowed to carry them in many European countries (in particular the OH ones such as the GAK) and that only the largest models sport scissors.
The first problem will be mostly a non-issue, again on account of the lockdown. That said, in accordance with the rules of the challenge I plan to carry the GAK in my pocket on the rare occasions when I leave the house and feel the thrill of being a bad boy. I doubt it will leave my pocket except in the case of a real emergency though. That much of a thrill seeker I am not...
The second problem is equally serious - after all, scissors are one of the main reasons for carrying a SAK at all (at least as far as I am concerned). Again, this burden will be considerably alleviated by the lockdown, but come on Vic, why can't you just make a Forester with scissors instead of the saw? I sure would buy one.
With this out of the way, let's get started with the challenge. My first experience with the GAK today was a change of batteries. I found the Philips to be a tad to wide for my son's Duplo train's battery compartment. It was a lot easier to open it with the can opener's SD.


-
@Myron said:
Very nice, BC! Maybe we can also convince you to head over to the Watches and SAKs thread and show us more of that lovely Sub. :)I’m sorry to disappoint Myron, but it’s not a Sub. Just a prodiver. I didn’t know if I wanted to wear a watch, but I got bit by the watch bug with all those little gears turning and the escape wheel forever running so I settle on something cheap to start with. I love how the Sub looks too. You’ll see me over there again when my Amphibia comes[emoji106]
Sent from my iPhone using Tapatalk
-
@Fuzzbucket said:
**Fuzzbucket Standing to Attention (aka Erect Fuzz) Day 1 **Unfortunately, due to plague, I'll have to sit this one out fellas as I'm miles away from all my stuff, but good luck to all those participating!

Maybe when the pestilence subsides you can jump on, and complete 30 days.

-
@Simon_Templar said:
Day 1New month, new challenge.
It felt awkward to leave the CT34 behind this morning - it has really grown on me recently. The only Soldier in my collection - and therefore my only comrade during this month of May - is the GAK.
I used to like and carry 111 mm SAKs quite a bit, but by now I am firmly footed in 91 and 85 mm territory and suspect I might consider the 111 mm line too large for EDC. Alas, on account of my being stuck at home most of the time, this challenge might not produce an answer to this question, but let's wait and see.
The other two problems I have with the 111 mm SAKs are that you are not allowed to carry them in many European countries (in particular the OH ones such as the GAK) and that only the largest models sport scissors.
The first problem will be mostly a non-issue, again on account of the lockdown. That said, in accordance with the rules of the challenge I plan to carry the GAK in my pocket on the rare occasions when I leave the house and feel the thrill of being a bad boy. I doubt it will leave my pocket except in the case of a real emergency though. That much of a thrill seeker I am not...
The second problem is equally serious - after all, scissors are one of the main reasons for carrying a SAK at all (at least as far as I am concerned). Again, this burden will be considerably alleviated by the lockdown, but come on Vic, why can't you just make a Forester with scissors instead of the saw? I sure would buy one.
With this out of the way, let's get started with the challenge. My first experience with the GAK today was a change of batteries. I found the Philips to be a tad to wide for my son's Duplo train's battery compartment. It was a lot easier to open it with the can opener's SD.
Nice to see that model join the fray. The reachability of the SDs is an important observation you've made right out of the gate.

-
@BClogic said:
I’m sorry to disappoint Myron, but it’s not a Sub. Just a prodiver. I didn’t know if I wanted to wear a watch, but I got bit by the watch bug with all those little gears turning and the escape wheel forever running so I settle on something cheap to start with. I love how the Sub looks too. You’ll see me over there again when my Amphibia comes[emoji106]Awesome! I can't wait to see the new one, and no disappointment on my end. The Prodiver is a great piece!
Myron
-
@glenfiddich1983 said:
Here’s the entire ammo-crate display :)

Glenfiddich, that crate is amazing!!

-
@Myron said:
Day 1 for me, with this '65 Elsener Model 1961 in red scales. I made a bicycle spoke bail for it so it can't accidentally fall out of my pocket and get lost.Happy Friday everyone, and I hope the stay-at-home orders are treating everyone as well as can be expected. Won't it be nice to see our Soldier Challenge outlast the quarantines...



That’s a real beauty- also my BYSAK (I’ve yet to find one!)!
@glenfiddich1983 said:
Here’s the entire ammo-crate display :)

Great crate too - did you make or adapt that one?
Day 1 bonus
A bit of overkill, but here’s ‘05 opening a can of Hoegaarden - would ordinarily be down the pub with friends, but hopefully will be again sometime soon.....

-
@Rizio Il Ghiro said:
Great crate too - did you make or adapt that one?I wrote about this project last year in this thead
-
Thanks for that - a good read, but even more impressive work - a fabulous result!

-
Day 1
Like many healthcare professionals - doctors and nurses, that were pulled out of retirement into active duty this month due to COVID-19, and in commemoration of those of them that ultimately fell from the disease they were trying to treat, my Alox Soldier has come out of retirement for this challenge. 
Not gonna lie... I'm excited to use it again. I'm going to keep it in excellent condition for anyone who may want to give it a new home in the future.
I just came off the SAK Stack Challenge, which was the first one I participated in. At the end of that challenge, I was quite sure about two things - if I was adrift on a boat in the middle of nowhere, I'd want to have the SwissChamp with me. However, if I was stranded on a deserted island, I would not. What I would want in that situation is... you guessed it... The Soldier.
I am looking forward to seeing the 111mm Soldiers join the challenge. Mine is a shelf queen, as I use the almost identical Trekker. So, I'll live vicariously through your pictures. My 93mm Soldier was alone on active duty for about 10 years, and I know it is up to the task.
I did add scissors to my EDC about four years ago, and like Simon, I factored this into the challenge. Oftentimes our military, and more so right now, our front line healthcare professionals do not have the equipment they need - the proper life support devices or the PPE to be able to maintain safety for themselves or even to prevent transmission between the several ill people that each of them is looking after - but they are making it work. They're being innovative - repurposing and modifying what they have, and adding sanitizing features to what they have to re-use. So for this reason (and also because... what good is a challenge when you have a backup...?) I have taken the LM Micra off my keys, and will not use scissors during the challenge. When the retired doctors and nurses that are themselves at high risk for succumbing to the virus are willing to figure out how to work with what they have - I will do the same.
On day 1, I gave a little test cut with my Soldier. Having used the Champ for the last month, and the PioneerX for the month before that, I have to say... this 2 layer Alox feels perfect in the hand.

-
I got it into my head this challenge was set for November
, however i can't complete it this month, next time round hopefully 
Here's some soldiery type stuff for my day 1 though


-
Borg your pic reminded me that I have a 108 that will work for this Challenge too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

...(don't ask me about the clump in the middle, didn't notice until I cut a packet opened) 
