Soldier 30 Day Challenge
-
Day 2
Just some jam on crackers... for no reason. The the two-layer SAK lends itself to light snack duties.

-
Day 02:
I used an old water container to make an impromptu planter.

The awl cut out perfect little drainage holes.

The 'planter' is now filled with potting soil and I've sown a few Black-eye Susans. Hope to have a follow-up shot of sprouting seeds in a couple of weeks!

-
I used an old water container to make an impromptu planter.

The awl cut out perfect little drainage holes.

The 'planter' is now filled with potting soil and I've sown a few Black-eye Susans. Hope to have a follow-up shot of sprouting seeds in a couple of weeks!

Excellent re-purposing Nix. Hope it'll work

Gotta love that awl
-
@McStitchy said:
Imagine invading France and you don't have one

-
On day 2 I couldn't find anything to use it for while doing yard work this morning, but it did slice some roasted jalapeños

-
Day 2
Opened a plastic envelope with the GAK today. And encountered yet another problem: I am so accustomed to reserving the big blade for cutting foodstuff that it just didn't feel right to use it for this job. I therefore resorted to the awl, which is brilliant for opening blister packs but turned out less than ideal in this particular use case. I managed, but it was a fight. The beginning of a wonderful friendship this ain't...

-
@Simon_Templar said:
Day 2Opened a plastic envelope with the GAK today. And encountered yet another problem: I am so accustomed to reserving the big blade for cutting foodstuff that it just didn't feel right to use it for this job. I therefore resorted to the awl, which is brilliant for opening blister packs but turned out less than ideal in this particular use case. I managed, but it was a fight. The beginning of a wonderful friendship this ain't...
I find that if they intended that you open it by hand, using tools complicates matters (especially on padded envelopes). I might use the awl to get the cut started and just tear the rest by hand through the path of least resistance.
-
DAY 2
Got a break at work today and had some salmon, then got bored and sharpened a pencil from my desk.


-
Most excellent uses! Bonus pic

Sent from my iPhone using Tapatalk
-
@McStitchy said:
Excellent re-purposing Nix. Hope it'll work
Gotta love that awl
I agree!
Sent from my iPhone using Tapatalk
-
Day 2 - The 54' helping whip up a little snack.

-
@ElevenBlade said:
I find that if they intended that you open it by hand, using tools complicates matters (especially on padded envelopes). I might use the awl to get the cut started and just tear the rest by hand through the path of least resistance.You are right, of course. I am just so used to slicing everything open with a blade. Next time I will use the awl only to get a chink into the envelope's armor and then tear it open by hand. Although it's terribly uncivilized to do it that way. ;)
-
@CraftsmanSAK said:
DAY 2Got a break at work today and had some salmon, then got bored and sharpened a pencil from my desk.
Did the sharpening go well? Did you use the smooth part of the blade for this?
-
Nice uses today, guys.

The Soldier is such a simple SAK, and yet, just look at what it did today!

-
@Simon_Templar said:
You are right, of course. I am just so used to slicing everything open with a blade. Next time I will use the awl only to get a chink into the envelope's armor and then tear it open by hand. Although it's terribly uncivilized to do it that way. ;):D I think you may have hit upon another universal truth of the Soldier - ask of it only that it makes the task easier. don't force a task on it that could be done better by hand..
We ask our soldiers, and at this time, our retired doctors and nurses to help to keep us safe and heal us. Let us be mindful that we don't ask too much of them - and also do what we can ourselves - wear masks, maintain distance, and stay indoors.
-
Day 2 was great! I'm already scheming on what I will carry for Day 3...
-
Day 2.,
I took the heavy plastic tag off a new adjustable wrench. While Urrea is based in Mexico (they were started as the Mexican arm of Proto; which closed up shop once Stanley bought Proto; and a businessman by the name of Urrea bought the company), their tools used to be made in Mexico, and in fact this wrench and the packaging is marked "MEXICO" but a tiny out-of-place looking white sticker says "MADE IN TAIWAN". That being said, it is a VERY sturdy wrench, and made pretty well. Not bad for ten bucks. I'm putting this one in my truck.

I used this Kutmaster Multimaster, made for an unnamed "overseas contractor" according to a company rep. Originally, there was a very Commonwealth looking cap badge. I have a photo of it, but could not find it on my PC, Amazon Photos, or OneDrive. And while I had a photo off Flickr here, I deleted most of my photos on their after limits were imposed after the SmugMug purchase of Flickr from Yahoo. The engraving on that side of the handle wore off from just being washed in dish soap and water with a toothbrush. This knife has a tanto blade (so far, not seen on another Kutmaster model) and a strap cutter replacing the can opener (not seen on very many; I think I've seen 3; none of which are official models). Wire cutters sheared part of the packaging, and the belt cutter ripped the rest of that heavy plastic tag off. Of course, the cutter needs an extensive sharpening (which I don't know how to do) as well as the tanto (I hate sharpening tantos)


GAK did some light cutting around the house. Part of the reason it is among my favorite SAKs is its light and slim profile. I think tommorow, I'll go Swiss with either my 1993 or 2008 93mm.

-
Nice photos today everyone! I’ll get mine posted shortly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
