Soldier 30 Day Challenge
-
Day 8
Last night - I used the opener for a beer.
Today - lunch preparation.
In an effort to show you something besides the grilled cheese sandwich I made.... Here's a picture.
-
@cody6268 said:
Day 7. Used blade (cutting trmmer string), punch, and screwdriver (removimg and replacing screws holding on bench grinder safety shield) with various things today. And I put some torque on the SD too. I simply don't get the huge number of examples with broken backsprings.The backsprings break when you open two tools on the same spring halfway - when there's tension on one side already, and you add tension to the other. That generally happens when you are playing around and taking glamor pictures like so

-
I had this happen on a 108 mm GAK once, but because it wasn't lubricated (and of course a 108 mm GAK doesn't have implements on both ends of the same spring anyway). The only thing I can figure is that since I was cleaning it there was zero friction-reducing lubricant on any surface of the spring, and it snapped. Now I am extremely careful when I am cleaning SAKs and avoid vigorous opening and closing before they are re-lubed.
I must say I've never had the problem of a broken spring on any of the Camillus knives I've owned. Between Model 1760's and scout knives I probably own two dozen.
-
Day 8 - Another work week in the bag. Time to relax.


-
Day 8
MAIL CALL!!!
My Wave is back from the factory!!!
To bad I’m in a challenge :C

Sent from my iPhone using Tapatalk
-
DAY FOUR
Lazy today... Just cutting some tape with that sharp AWL

-
Bonus shot. Got some stitching to do.....

Sent from my iPhone using Tapatalk
-
The '93 knife helped install the seat for the '16 kid.

-
Day 8 photo
Couldn’t get the other photos to post except this one!


-
Day 08:
A cold and rainy day here... I retreated to the couch with a book and cup of tea. So.....no uses....

-
I know this is a restatement, but it deserves repeating.
Another day of great photos and uses.No uses here today. Spent the day with my Son on his new student College Orientation.
So just a couple of glamour shots today.
Day 8

I'm not sure if the pouch was issued with the knife, but I am certain it is from the same period and came to me with the knife.
] -
Day 8: Eating gummy bears
-
Nice Soldiers and photos today!

-
DAY 8. To remove a small part I lost, I had to cut away a piece of trim to get at it. The aggressive, angled pull cut teeth of the GAK and a quick yank with my MT pliers did the trick.
<a href="https://postimg.cc/RNWgzrgT" target="_blank" rel="noopener noreferrer"><img src="https://i.postimg.cc/KvNwBxLC/KIMG0509.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Day 9
Solider 23, this is one of the more earlier Soldier I have collected, and in good pristine condition. The scales are in such condition that I even wonder whether it was a shelf queen or might have repaired by Victorinox at some point. Next to a 2020 Tokoy coke can, probably will become a novelty item someday.

-
@Myron said:
Keyring 2000 today. I’m at the tire shop this morning and tire shops just aren’t too face mask friendly so I’m choosing to wait in my own car.Sent from my iPhone using Tapatalk
Myron, I am slightly confused--do you mean the car wash people don't welcome people with face mask on? Why would they do that? Is that safer for them when customers wear face mask? I always think wearing face mask is a courteous, especially stopping pandemic or when you feel pretty sick.
@G-Dizzle said:
Day 8: Eating gummy bearsI like Gummy bears, but for whatever reason, just can bear watching people eating them. I have seen so many gummy bear brutality over the years that I cringed whenever I see one.
@cody6268 said:
DAY 8. To remove a small part I lost, I had to cut away a piece of trim to get at it. The aggressive, angled pull cut teeth of the GAK and a quick yank with my MT pliers did the trick.<a href="https://postimg.cc/RNWgzrgT" target="_blank" rel="noopener noreferrer"><img src="https://i.postimg.cc/KvNwBxLC/KIMG0509.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
From my own saw tests, 108mm definitely has one of the most aggressive saw teeth in business.
-
Day 8
Again nothing to report (sich)

-
Day 09: My work day carry!

-
Good morning!

Lots of great looking Soldiers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
