MTO Unleashed!
-
@comis said:
Thanks for the reply, should be more clear on that, yes, indeed. I remember reading about working with G10/Carbon Fiber, and some would even recommend specialized ventilation system for safety reason.I am not too familiar with the graphite spray, it sounds really promising, but just curious whether special care is needed to work the spray.
Not really, same as any aerosol.
-


Today is SAK Mountaineer, which is one of my most trusted EDC knife/tool for years. It travels with me to some of the most remote or busiest places on earth, and it has always been universally accepted as a friendly harmless tool.

I would like to use this opportunity to thank each of one of you whom have taken the time to participate in this challenge, thank you, thank you, and thank you!

You folks are what made this a great challenge, and this forum an awesome place to dwell!

Thanks for having us Comis

-
Between being two-layer Tuesday and Rizio’s compact, I thought I would post my custom Compact from Rain.Z Knives. The main toolset is that of a Compact. The backside tools were changed to the phillips and an awl. The scales are not plus scales, but they are a textured titanium that is nice and grippy. This was my primary user SAK until I got my hands on a Yeoman.
That is an awesome piece... should be the perfect EDC

-
Between being two-layer Tuesday and Rizio’s compact, I thought I would post my custom Compact from Rain.Z Knives. The main toolset is that of a Compact. The backside tools were changed to the phillips and an awl. The scales are not plus scales, but they are a textured titanium that is nice and grippy. This was my primary user SAK until I got my hands on a Yeoman.
Now that it is nice, titanium too!!

-
DAY 30
2 machetes to end with



-
It was very fun to do comis, I liked it very much, thanks.

Is there already a badge for this challenge ? -
**Fuzzbucket Day 30 - Final **
The one that started it all - my father's Pruner, the knife he always carried and the first pocket knife I ever saw or encountered. After many years of constant use, he eventually passed it on to my brother, being the oldest of the two of us, but they've both gone now, so it's defaulted down to me.
The stag handle is incredibly smooth and warm to the touch, and all the pins are exposed from decades of use. The brass pommel has lots of tiny indentations from when it was frequently used as a hammer, which is something I fondly remember him doing a lot, especially at Christmas time putting up the decorations. When I was little, I couldn't even open it, the backspring to me was so immensely strong, but it would barely even rate a 5 on the pull scale now.
It took me a long time to locate this knife and it's now probably the most sacred object I have in my possession.

-
@ReamerPunch said:
This was a lot of fun to follow. Tons of great pics, and stuff I had never seen before!
RP, thanks for tagging along! Definitely appreciate it!
Thanks Steve!

@McStitchy said:
Thanks for having us Comis


2 machetes to end with

Finishing Big! Yes, the badge is ready to be applied!

-
@Fuzzbucket said:
**Fuzzbucket Day 30 - Final **The one that started it all - my father's Pruner, the knife he always carried and the first pocket knife I ever saw or encountered. After many years of constant use, he eventually passed it on to my brother, being the oldest of the two of us, but they've both gone now, so it's defaulted down to me.
The stag handle is incredibly smooth and warm to the touch, and all the pins are exposed from decades of use. The brass pommel has lots of tiny indentations from when it was frequently used as a hammer, which is something I fondly remember him doing a lot, especially at Christmas time putting up the decorations. When I was little, I couldn't even open it, the backspring to me was so immensely strong, but it would barely even rate a 5 on the pull scale now.
It took me a long time to locate this knife and it's now probably the most sacred object I have in my possession.

Fuzz, thanks for sharing the story, making this knife all this special!
-
Oh, before I forget, congratulation to everyone finishing the challenge!
**Please don't forget to PM me your address for free magnet! **

Currently many posts office services around the world is still pretty much suspended(save the EMS or more expensive courier service), but once the airmail resumes, I would be ready to mail them all out soon!
-
**Fuzzbucket Day 30 - Bonus Pic **

-
-
Day 30
Great challenge everyone !

Finishing up with a couple of Old Timers
194OT and a 80OT

-
@Fuzzbucket said:
**Fuzzbucket Day 30 - Bonus Pic **

-
@Fuzzbucket said:
**Fuzzbucket Day 30 - Final **The one that started it all - my father's Pruner, the knife he always carried and the first pocket knife I ever saw or encountered. After many years of constant use, he eventually passed it on to my brother, being the oldest of the two of us, but they've both gone now, so it's defaulted down to me.
The stag handle is incredibly smooth and warm to the touch, and all the pins are exposed from decades of use. The brass pommel has lots of tiny indentations from when it was frequently used as a hammer, which is something I fondly remember him doing a lot, especially at Christmas time putting up the decorations. When I was little, I couldn't even open it, the backspring to me was so immensely strong, but it would barely even rate a 5 on the pull scale now.
It took me a long time to locate this knife and it's now probably the most sacred object I have in my possession.

That's a real beauty. The wear and patina....wonderful. The whole things speaks volumes. And conjures up a bygone age, as well as your loved ones, Fuzz. Fantastic.

-
Day 30:
It was awl-ways going to end like this for me.......

Buck 110, S30V blade, Buffalo horn scales
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

