Anything to do with motorcycles, scooter, etc...
-
I have never seen deer do anything like that
Normally as soon as they see you they run away -
@pietervn said:
I'll say it again: US Inmates, please take this man for a ride!!! :DThe bike is looking really good JR. Thanks for keeping us posted. I find your journey to the finished bike very interesting, including your excellent engineering skills.
If you ever get to Oz, I WILL take you for a ride!!!
Cheers, Pete
Thanks it’s just taking forever, it just sucks cause I need someone watching me, I can’t do anything by myself in case I have a seizure while doing something like running the grinder to cut the frame and start cutting body parts,,

Anyway what color do you think I should paint that?
JR -
Got to work on it again today, I worked on the chain, I figured by just placing the one pulleys under the seat would work to Guide the chain to the back, boy was I wrong! It would after going through the pulley then hit the frame, so how do I get the chain up and over the frame to get to the rear gears? Well I used an S gear shift, as you can see behind the seat, but then the bottom part of the chain it’s going to hit, so I put a half of a shift on that bar under that reflector but since I brought the chain down then it was rubbing on the front of the frame, like
give me a break! Anyway I busted the other chain off the bike I cut up and connected the two, but as you can see it only goes back to behind the seat, so I need a 3rd chain, funny thing was how I did the aligning, I took paracord and wrapped it around the front gear, and made the route tightened it up and imitation chain, flexible too, I guess it’s good for mechanical stuff too? But I had to raise the whole trike up so I can work on the bottom, getting there!!
JR
-
Well, got a little time in the garage, the blue caster you see under the seat I had to reshape it, I had it like / shaped, so the chain wouldn’t really ride on anything but the two sides so I had to cut it to a __/ shape so that there was a flat surface for the chain to ride on.. well that one wasn’t to hard, the new one I got that sits behind the seat, well, he was a little mean! I started cutting it and then a glob of rubber/plastic that wasn’t done cooling stuck to my finger, OUCH! I tried flinging it off then used a file to quickly scrape it off cause it was stuck and burning! So I had to go over to the outdoor faucet and run some cool water over it which I really couldn’t feel, it just wasn’t going my way, anyway, I mounted the new caster on the back after I got it cleaned up, then remounted the other one under the seat and now the chain has total pull on top from front to back, no springs or anything, so totally solid for good torque, now the under half that can have play, I still have to put something to keep the lower part off the upper, because it looks fine in this pic but, that’s because I have the chain caught on that bar..
JRSo still have the bottom part of the chain, shifter, brakes, and if it works cosmetics,,

-
Had some more time, and completed the chain setup, I threw on a quick shifter to see if i can peddle it down the street and it worked, made some noises, it shifted, needs some work with steering because there’s two bars that limit it from turning it to sharp and well, I couldn’t even make a u-turn without hitting the curb, so I think those are getting cut off, but it’s getting there.. here you can understand the bars,,
JR

-
Keep us posted MadPlumbarian. I am really interesting in seeing where you are taking this.

-
@Chako said:
Keep us posted MadPlumbarian. I am really interesting in seeing where you are taking this.
I’m trying, I might remove the lower gear section and install what others have which is a tube, basically less restriction.. on another group I got yelled at for having the 2nd pulley on the top by some lady, I told them there was no way I could get around the seat and frame without using it, and she says, then it was a poor design! Yet someone else is the one who said to put the second in order to make it totally solid! That lady shows me a pic of their trike, it had freaking disk brakes on both front and the back, the chain was spit polished, it had a mirror, and was probably built using freaking laser cut metal and machine welding if you get the point, a good $5k trike, all while here’s me using scrap parts and just nuts and bolts.. I think I’m a good $50bucks into it? And yet it made it down the street and back!
JR -
Such a long chain - you need a driveshaft! :D
-
Your trike is really coming along MadP. Curious is you could get a dog that could sense your seizures? Maybe a little one so you could carry if needed. My little guy was only 4-5 lbs so he could easily be taken most anywhere. Just a thought.
-
@Aloha said:
Your trike is really coming along MadP. Curious is you could get a dog that could sense your seizures? Maybe a little one so you could carry if needed. My little guy was only 4-5 lbs so he could easily be taken most anywhere. Just a thought.Our last dog a golden retriever, (not so little at 80lbs) believe it or not we rescued him and when this whole new type of seizure started he actually knew, if I was sleeping would come over and put his head on me or jump on the bed, same if sitting, if I was doing something he’d whimper and start nudging me, at first we couldn’t believe it, the first time I didn’t even have a seizure, but I didn’t feel good, I just got home from work and had to sit down, and he was allll over me, kept licking my face, pinned my arms on the chair and wouldn’t let me move, we thought he was nuts, the Mrs asked if I took my Rx since I didn’t feel good and said I think so, and she went to check and I didn’t, so she pulled him off in order for me to get the Rx down, and he went right back to business, pined me and licking my face, after about 20min he started to cool down and I felt better let alone totally clean, but the Mrs and I kinda put two and two together thinking maybe he knows about seizures? And then the more they came the more he held me down until it was over,
But I’ve looked into programs, there not covered by insurance and cost up to $40k!
JR -
Got another err, 3hrs out on the trike, installed a gear shift on it, I wanted one on the handle but none of the cables I had were long enough, then the main bar is larger then a handlebar so nothing would fit, so I rigged it,, needless to say it shifts, just needs to be adjusted,, also ground off the over steering bars, cause they wouldn’t let you make a U-turn within a full road, you’d hit the curb, so the Mrs complained when sparks flew! Lol.. he he,, but I took it for a spin up and down the block, needless to say it doesn’t start well in the wrong gear! I had to reach up and roll the tires to get the thing going on order to get it to switch gears before I could move it by peddle, turned much tighter, so I might be able to ride this thing on a sidewalk,, one other thing I did was took the set of S gears off on the bottom, someone told me to just put a tube and just run the chain through it, only thing is now I got to pop the chain and run it through then reconnect it, such a bitch! Sorry! But tomorrow I gotta strip the parts off the other bikes and make room, supposedly the kids getting a 86 Monte Carlo SS, and idk if that whole things getting put in the garage or just the engine to be worked on? Cause even though it’s a two car there’s not going to be any room!
JR -
G'Day JR,
Excellent updates again.
Are you planning to get cables made? A motorcycle shop may be able to assist in that?
For easier u-turns, may I suggest a decent hand-brake? :D You can get a much better turn even at speed!!! Just don't hit the curb.
Post a pic of the car please.
Pete
-
Excellent updates again.
Are you planning to get cables made? A motorcycle shop may be able to assist in that?
For easier u-turns, may I suggest a decent hand-brake? :D You can get a much better turn even at speed!!! Just don't hit the curb.
Post a pic of the car please.
Pete
Well, if the other cable I have out of the dozen or so fit I won’t need one for the brake, just gotta figure out which handle I want to use, the shift isn’t bad where it sits, it’s kinda better there because it’s less cables to step around, it just goes down the main frame, crap I knew I forgot something, we were at the store and I should have looked for zip ties! Any pics are pretty much going to be the same just switching out the cable shifter and brake handle, just taking a break now since we just walked back from the store and I gotta go strip the parts off the other bikes in a few,, but the BIG change was just cutting those restrictors off, OMG I can turn!
JR -
We need a video of it in action ! ;)
-
It’s getting there!
Worked on the brake, got the cable ran and figured out the lever, I had about 10, one was perfect but was broke and couldn’t do anything with, “but” I took the handle off and put it on another mount, doesn’t have much pull because of the hand grips, so I kinda moved things around, so the only thing left is the chaining, it’s run “but” it’s long on the bottom and rubs so most people say to just run it through a tube, so now I have a tube but where do I mount it? I found a elbow to the tube and I can figure on mounting that to the body, so I cut a hole right in where the tube mounts so it’s like a “t” but with the one end cut off, so if I mount this, the only thing is to pop one of the pins out of the chain in order to run it through, then re pin it, which i hate since I don’t have one of those tools! Other then that it’s just adjustments for the gears, making the handle angle right, and that’s it,, if all works then it’s going to be time for the cosmetics! I’ve already put about 4 extra reflectors besides the 3 that were already on it to make it look nutty, and I ain’t done :D
JR -
I also stripped the extra bikes I had laying around of all parts usable, tossed them in a box and then tossed all’s scraps out to the curb, people will be by either for parts or see $$ for scrap metal, one person already picked up the original 20” wheel that was on the trike when I was washing my hands of all the grease,,
JR -
That looks like a lot of fun.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

