One Eleven 'n One Twenty-one
-
<u>DAY 6</u>
Today, being Epiphany, is the day to take down the Christmas Tree. As I awl-ways insist on having a real one this meant a carpet of pine needles awl over the yard ::)
I took the OHT intending to use the saw to assist but, although able to cut through branches, it shook the tree so much that it would have been totally bare before I'd even started :ahhh
I had to reach for the proper shears, and saw (for the trunk) in the end but, it was worth a go



-
@Barry Rowland said:
I have several knives with it, but haven't really put it to work. The opener end of things is ok, but not quite as well as the regular can opener. As a screwdriver it's not bad.
The downward angle makes it feel trickier to use, in my opinion. I can understand, though, why it's on the Hunter. On a survival knife, there are definitely bigger priorities for a downed pilot to worry about than tightening screws :DAlthough I think it was vital for Burnett in "Behind Enemy Lines" ... come to think of it he was undoing screws ...

-
-
Day 06.
Got my Rescue Tool out of the car for today.
I'm not saying a word but I did use the 111mm

-
:D
-
@Echotech said:
Thanks Rizio
not sure how long it’s going to take, already been at it some time but at least like items are with likes, just not well sorted yet.
Keep coming across things I’d completely forgotten about (some I don’t recognise at all) which I’ve obviously kept in case they’d be useful …for the most part they haven’t!
Like you say, be really good when it’s done and make future projects a lot easier
…and then at some point I have to tackle the big one, 25+ years of studio equipment, this is my current rack (synths and computers not shown), I used to have about 3 times this, a lot has gone, a lot hasn’t! The cables alone take up four large crates :ahhh
Quite a few echo(tech) boxes hence the name

That looks inspiring [emoji1591][emoji1591][emoji1591]
-
Great pics and uses gents! [emoji1319]
Day 6
Happy orthodox Christmas btw [emoji312][emoji319]
Finally had some action today.
Here’s the story. Quite some time ago my lady’s car keying attachment started to fall apart. I tried glueing it with super glue but it lasted only for a few days before falling apart again.
Further examination uncovered that the bottom part was actually made of copper, so I put this task on hold before my lady brought me a Dremel Versatip gas soldering iron as a New Year’s gift [emoji1316].

Tip: it is sold without the gas so you’ll have to buy that separately.
As you probably guessed it neither of us knew that so I ordered some butane gas and today it finally arrived and at last I had a chance to use it.The idea was to put some tin into the bottom part of the keychain, then put the cover, hold it tight and heat until the tin gets melted and solders parts in place.
So first I used pliers to cut tin pieces

Then I fired up the soldering iron...

...and here’s the result before cleaning

After wiping the keychain with toothpaste it turned out pretty well and passed a drop test [emoji1305]

Bonus: while I was busy with the above my lady asked me to open a can of homemade pickled shrooms we’ve gathered a few months before

-
Merry Christmas to your, alexander!
And good work btw.

-
Day 7
Cutting some excess fire foam away to get a new cable through
-
How do you celebrate orthodox Christmas, alexander?
-
@ulzhan said:
How do you celebrate orthodox Christmas, alexander?Just family dinner, nothing fancy.
Actually there should be 12 lenten(?) dishes on the table tonight, but this year we’ve skipped that [emoji56]The main dish should be kutia (кутя) - you may read more on it here
Do you celebrate it as well? If so - what traditions do you have?
-
Two weeks ago we didn't do anything here. In years past there was a more festive atmosphere to it, but these days are long gone.
We just had a chicken and then the miss and I played some games on our new game console.
2020 was even more silent than the last years of the 2010s - christmas-wise.
-
@alexanderre said:
Great pics and uses gents! [emoji1319]Day 6
So first I used pliers to cut tin pieces
Bonus: while I was busy with the above my lady asked me to open a can of homemade pickled shrooms we’ve gathered a few months before
Nice pics and nicely done alexanderre!

-
@alexanderre said:
Great pics and uses gents! [emoji1319]Day 6
Happy orthodox Christmas btw [emoji312][emoji319]
Finally had some action today.
Here’s the story. Quite some time ago my lady’s car keying attachment started to fall apart. I tried glueing it with super glue but it lasted only for a few days before falling apart again.
Further examination uncovered that the bottom part was actually made of copper, so I put this task on hold before my lady brought me a Dremel Versatip gas soldering iron as a New Year’s gift [emoji1316].

Tip: it is sold without the gas so you’ll have to buy that separately.
As you probably guessed it neither of us knew that so I ordered some butane gas and today it finally arrived and at last I had a chance to use it.The idea was to put some tin into the bottom part of the keychain, then put the cover, hold it tight and heat until the tin gets melted and solders parts in place.
So first I used pliers to cut tin pieces

Then I fired up the soldering iron...

...and here’s the result before cleaning

After wiping the keychain with toothpaste it turned out pretty well and passed a drop test [emoji1305]

Bonus: while I was busy with the above my lady asked me to open a can of homemade pickled shrooms we’ve gathered a few months before

Happy orthodox Christmas, Alexanderre! Reminds me of when I worked in Moscow - we missed Uk Christmas as the offices in Moscow were working, and we missed orthodox Christmas as the office in London was working! Sensible people took both off, but not us, oh no!

Nothing more annoying than getting a new
toytool and discovering a vital component is missing like gas in this case....
However good work in the end! 
-
@Rizio Il Ghiro said:
Happy orthodox Christmas, Alexanderre! Reminds me of when I worked in Moscow - we missed Uk Christmas as the offices in Moscow were working, and we missed orthodox Christmas as the office in London was working! Sensible people took both off, but not us, oh no!
Nothing more annoying than getting a new
toytool and discovering a vital component is missing like gas in this case....
However good work in the end! 
Haha, thanks, bud, hope you’ve spent it right this year [emoji23]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
