Juice CS4 opinions
-
@trickknife said:
I think it works like the more fancy versions, but like all the multitool features it is a good substitute that works in a pinch. To make it work, you screw in the corkscrew until it is almost all the way in, then tip the handle (with the assist partially extended) until the notch on the end of the assist rests on the edge of the bottle (it kind of straddles it). Then lift up on the handle and allow it to pivot around the axis of the assist. It should give you enough leverage to pull the cork out.Rick
Problem is, there is only one notched end. That makes for an unstable fulcrum, allowing the tool to spread out against the rivets enough to loosen them. In addition, all that force on one point can cause the glass rim to chip. Dedicated assists have a double rest for this, which works way better. I think the Juice assist is a problematic design and after having sprung my CS4 with one, don't use it any more. The corkscrew is workable without it.
-
Good point. I don't use the assist either if I can avoid it. If you really did need to use it, you can round of the corners of the notch on the assist. You'd want to buff it real good too with a buffing wheel to prevent chipping. But if your wine has a screw top, then you don't have anything to worry about. ;D Or better yet, if it comes in a box with a rubber stopper.

Rick
-
The only thing classier than wine in a box is wine with a screwcap and expiry date!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



