Matt’s Modified SAK Challenge
-
@pa_strunk said:
Day 2 - Small Blade - 1 & 5/8” (3.8 cm), same steel and HRC as main blade. I use this blade about 80% of the time and the large blade 20% of the time. Originally designated as a “ink eraser” and earning name “pen blade.” Way underrated, as it has a thinner spine, less width, providing better control when you carve or make precision cuts. This blade even provides less risk of damaging contents when you open packages.I am totally in the same boat as you, love the small blade and I too use it 80% of time. What I like most about the small blade is regardless which part of the world I am in, hardly anyone will rise an eyebrow if I use it in public.

-
If you think the small blade is under appreciated, then the next tool is the most unappreciated on the SwissChamp. All tools from now till the end of this challenge are X39Cr13 steel with HRC 53. Springs are X20Cr13 HRC 45. Day 4 - Fish Scaler - excellent to remove fish hooks (pliers work as well), not so good for fish scales, great imperial or metric ruler, range finder - hold tool open at arms length, average man is 6 foot (1.8 meters) in height, count number of serrations compared to man as target in distance, divide 300m or 1000ft by number serrations covering target to determine distance. Also may help playing golf, just get a buddy to stand by flag. Interrupted slot head driver, place match in end to extend length to light something and protect fingers, emergency fork for finger foods, great to push strings or wire through tight spaces and even a “can key” if you remember how one of those works. I look at it as a handy tool in tight spaces when I don’t want to bugger up another tool.

-
Day 5 - Wood Saw - has bidirectional teeth so it cuts on push and pull stroke, great for wood, PVC (plastic), sheetrock, rope, or fibrous materials that will dull knife blades. Can use the spine of saw to strike a fero-rod to make sparks for a fire. Also use saw to expand a 5 mm hole created by awl in wood to a 10 mm hole. Just a great multipurpose blade for a variety of tough materials.

-
Day 6 - Scissors - whether your self grooming or making precision cuts. Nothing beats Victorinox scissors in my humble opinion.

-
Day 7 - Pliers - Needle nose pliers that work as heavy duty tweezers. Great for getting into confined areas. Try them the next time you have to check or replace a fuse in an automobile. Regular pliers that can either get into tight spaces or expand up to 2 cm. Wire cutters that often people make fun of, but work in a pinch. After all, who says you have to cut a wire with one snip. Last an electrical crimper.

-
Day 8 - CyberTool - Female Hex Drive 4 mm for bits, Female Hex Drive 5 mm for D-Sub connectors for you computer guys. Standard double ended bits - Slotted 4 mm/Phillips #2, Phillips #0/#1, Hex 4 mm/Torx #8 & Torx #10/#15. In my humble opinion the best single tool on my mod. I put a 1x4 mm magnetic in my bit holder, which still works with standard double sided bits that comes with a cybertool and makes it a universal 4mm driver. Works great as a precision driver or for my 8 year-old boy’s zillion and one toys.

-
Day 9 - LED Light - Not the brightest by any means, but slightly improved with 91 mm models made after 2019, powered by 2 CR 1225 3V button batteries. Can toggle button on or press button back for continuous use. Works really well in conjunction with cybertool hex driver to illuminate dark and tough places to reach. Only the cybertool Hex bit driver, can opener and primary blade open on the side of the LED light. Imagine if Victorinox had oriented so you could use all the tools on the opposite side and the cybertool Hex bit driver. Anyway, I still like it a lot on this mod.

-
Day 10 - Magnifying Glass - This is the 6 power newer version. I chose this over the older 8 power version since you have a great viewing field. Getting older. Need it to see the small print sometimes. Could use to start a fire in desperate circumstances I guess, but more handy for finding wood splinters in my humble opinion.

-
Day 11 - Can Opener - Has 3 mm Flathead Driver, in-line #2 2D Phillips Driver, open square valves, great for scraping, removing SAK scales, light duty prying when you need a sharp edge to access, handy to remove wire handled or open cans off of a camp fire, or even pulling or pushing closed hot oven grates at home.
-
@pa_strunk said:
Day 11 - Can Opener - Has 3 mm Flathead Driver, in-line #2 2D Phillips Driver, open square valves, great for scraping, removing SAK scales, light duty prying when you need a sharp edge to access, handy to remove wire handled or open cans off of a camp fire, or even pulling or pushing closed hot oven grates at home.
-
Looking great with all the pics, pa

-
Thanks Poncho, Day 12 - Bottle Opener - 6 mm Flathead Screwdriver, Cap Lifter, Wire Stripper/Bender/Fire Fly Striker, Mini Pry Bar (Use in 90 degree position and turn counter clockwise if concerned about damaging tool), Can use a 6.5 mm 1/4” socket to make an improvised 1/4” bit driver, Works as a wedge to hold a door open, Score cardboard for bending or folding, Pull out nails or staples. Probably the most versatile tool on most SAKs.

-
Day 13 - Corkscrew - open wine bottles, scraper, loosen knots or laces on gear, drill into wood to make a tubular cavity, remove drywall inserts, remove broken light bulbs out of sockets, corn on the cob holder, and store Victorinox mini tools &/or Fireant Starter and Tender System.

-
Fun, interesting, and useful thread.

-
Thanks Jazz, hope a few members like this thread as well. Day 14 Chisel - I like chisels for scraping and wood work. I am glad it is on the tool. Think it would be much more effective if it was an inline tool vs a T-handle back tool. Also wish it was about twice as wide, however it does come in handy on occasion.

-
I don't believe I've checked in yet, but I have been following. Good stuff! Next time I remove a set of scales I don't intend to reuse, I'll try the can opener's tip. And I do like the chisel as well!
-
Thanks Farmer X, Day 15 - 2.5 mm Flathead Screwdriver - T-handle small driver, good for electronics, recessed screws, even works in place of phillips driver for some screws, also handy to untie knots in paracord.

-
Day 16 - Multipurpose Hook - Anybody raised on a farm knows what a “slop bucket” is like to carry when watering or feeding animals. Plastic handgrips on these never last and make the SAK hook the best tool ever for this chore. Weight limit is 90 Kg or 200 lbs. Open drawers missing handles, screw in hanging hooks for stockings, pull open hot oven grate, tighten laces or paracord, install springs, twist wire to tighten around an object, remove staples, pull tabs on bottles or cans, work with a bicycle chain, tighten spokes on bicycle wheels, or if nothing else use in conjunction with Victorinox ink pen on a SAK. Million and one uses.

-
@pa_strunk said:
Multipurpose Hook...million and one uses.
The multi-purpose hook is a very useful and underappreciated tool. -
Day 17 - Awl, Reamer, Sewing Eye - Punch holes in materials such as leather, canvas, plastic, wood or soft metals. Drill holes into materials to create up to 5 mm holes. Sewing of cloth or leather. Create shavings or strike fire steel. Ice Pick (watch your fingers). Self defense (hopefully not necessary).

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login