Explorer Challenge May 2024
-
Day 24: Got in some new stationery today, and used both the main blade and scissors to free it all from its packaged prison.
[attach id=0 msg=2479792]

-
It is time to replace the elements in my water filter. Had to open the shrink wrap and free the elements.
[attach id=0 msg=2479821]

-
@Buzzbait said:
Got in some new stationery today, and used both the main blade and scissors to free it all from its packaged prison.I thought of knife and die-cast packages as being prisons. Stationery packaging, not so much. And the Mitsubishi pencil is way cool!

@Jeffjeeptj said:
It is time to replace the elements in my water filter.I should do the same, but mine is a Brita pitcher. Yours appears to be the sort that is plumbed in.
Great work, y'awl!
-
Day 24
Main blade opened a couple of packages, and cut the tags off of a new backpack for one of my daughters.
Challenge totals:
Large Blade 21
Small Blade 31
Scissors 15
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
Magnifier 1
Corkscrew 1
-
Day 25 of 30
Today no use for Explorer

Only Tools Matters
-
Day 24
Great pics and uses awl. Pretty happy with how this challenge is going. Only a few days left.
Today we went to a gas engine show. Used the main blade to cut up hot dogs and cheeseburgers.
When we got home I used the blade, scissors, and Phillips to put together a wooden table for the kids.
[attach id=0 msg=2479905]
And mosquitoes are starting to be a bother so setting up the tiki torches. Scissors cut off old and trimmed new wick.
[attach id=1 msg=2479905]
Tools used:
Large blade x13
Can opener x6
Scissors x10
Small blade x7
Cap lifter x7
Toothpick x6
Tweezers x4
Philips x9
Mag lens x5
Awl x4
Hook x3

-
Grandson cut a couple of pieces of pool noodle and split them to fit over the corners of a trailer ramp.
[attach id=0 msg=2479948]

-
@Grand_Banana said:
Today we went to a gas engine show.Sounds interesting! What sort of engines were on show?
-
Day 26 of 30
Used scissors to remove tag from my daughters new shoes

Only Tools Matters
-
Day 24:
I trimmed some flowers in the garden with the scissors. They're awesome for that.

-
Still catching up.
Day 25:
A vintage Executive arrived in the mail, so I used the Explorer's Phillips and large flathead drivers to tighten up the Lansky clamp to sharpen the new guy.

-
Day 26:
Today was spent gardening. I replaced the spring plants with plants that will (hopefully) survive our Texas summer heat.
[attach id=1 msg=2480032]
With the help of the magnifying glass, I discovered some unwelcome guests: aphids! :ahhh
[attach id=0 msg=2480032]
I used the awl to make some quick drain holes in a planter.

-
@Farmer X said:
Sounds interesting! What sort of engines were on show?It was bigger than I thought it would be. A lot of of 20s John Deer type E engines. Variety of 1.5HP to the later 6HP. Some pretty neat early 1900s IH and some Briggs. Spent more time with the tractors, which were mostly Farmall. It’s funny out here the John Deere 1.5E (I think) was popular for water pumps while the Farmall H and M were popular for the tobacco fields. Farmall A was also popular. Not as many John Deere as Farmall. Some case and Ford sprinkled about.
It was fun but the most fun is watching the kids get so excited.
-
Day 25
Just the cap lifter today to open a drink followed by a couple beers later.
[attach id=0 msg=2480036]
Tools used:
Large blade x13
Can opener x6
Scissors x10
Small blade x7
Cap lifter x8
Toothpick x6
Tweezers x4
Philips x9
Mag lens x5
Awl x4
Hook x3
-
Day 25
Scissors trimmed my mustache, and cut out some temporary tattoos for the kids.
Challenge totals:
Large Blade 21
Small Blade 31
Scissors 17
Hook 1
Inline Phillips 3
Toothpick 1
Cap lifter 1
Magnifier 1
Corkscrew 1
-
We wanted a small piece of meat. Explorer opened the package. Did wash the meat juice off the blade.
[attach id=0 msg=2480082]

-
How’s the challenge going? I’ve been out of the loop on a trip out of the country this pas week but I’m back home!
From this challenge, I’m curious if anyone sees any screw stripping from the inline Phillips. The driver is well made, of course, but it seems to be a sort of “in between” size head, between a #1 and a #2 kind of? I could see that potentially tearing up some cheaper screws…
-
Day 25
I visited a model train museum. Tried to get a shot with a moving train but they were too fast.
-
Day 26
Packing for the return trip.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login