Showcase: Mods to plier-based multitools
-
wow!
-
Tool name: my wave
basis: wave plus
Aim: to make it more useful for my needs
Mods: replaced the blade with an s30v charge blade, added tweezers from victorinox under the woodsaw, took out the eyeglass driver and can opener, and installed a second bit driver for number 1/2 Phillips, and have 3 size flat drivers on other side.[attach id=0 msg=2444340]

-
Thats really cool, man what I would get myself into if I could 3d print parts.. great ingenuity designing a making your own bit holder
-
Way to make it yours! Looks like a proper tool.

-

This post is years old but I found you on a Google search. I made an account just to ask you about this project. This is exactly the thing I'm looking for my Style. Is there any way you could share the files for this project or I could even purchase them from you. Idk if you will ever see this but, awesome job this is really cool and I would love to add it to my Style. Hope to hear from you! -
@CrazyWildMan said:

This post is years old but I found you on a Google search. I made an account just to ask you about this project. This is exactly the thing I'm looking for my Style. Is there any way you could share the files for this project or I could even purchase them from you. Idk if you will ever see this but, awesome job this is really cool and I would love to add it to my Style. Hope to hear from you!Welcome CrazyWildMan, I assume you refer to this post?: /post/2387683 ?
-
I just spent the last hour going through this thread, and it's great!

-
Tool Name: MP400SbF
Basis: Gerber MP400
Aim: MP400 that pairs well with plain blade and scissors tools (e.g. SAK Compact.)
Mods:- Standard disassembly.
- Swapped main blade for Gerber Centerdrive serrated blade.
- Made room for Gerber Centerdrive pry tool.
- Swapped scissors for file and added a chisel end with box cutter corner.
Links:

-
Tool Name: Herman Wave
Basis: Gerber Armbar Slim Drive and Leatherman Wave
Aim: Combine two tools I picked up used and cheap to make one that was better than either by itself.
Mods:- Full disassembly and a LOT of cleaning of the rusty Wave which had a broken off plain blade to start with.
- Reshaping Arbar blade and drive to fit the wave (pivot holes were fine, just the locking shape and clearance.)
- Cutting the outside of the Wave frame to allow parts to fit.
- Serrated blade shortening and adding chisel end.
- Both Wave bit drivers moved outside and added a long Philips part and anotherflat driver (reshaped to a reamer awl) on the inside.
- Notched one end to fit in an extra removable tool, right now it is a metal spike.
- Since I removed the wood saw I keep this t-shank adapter on me that I designed to work with SAK bottle openers and Wave flat head parts. I keep the saw blade in my wallet tool caddy thing.
Links:




-
This is just a mockup, but if I end up using this tool a lot I might do some decorative etching on it and fill in the letters of the 'Herman Wave'. Sort of a nod to the Great Wave of Kanagawa art :)

-
Has anyone done this before?
[attach id=0 msg=2588271]
[attach id=1 msg=2588271]


-
Inspired by the Reave.
A preliminary mod, I will swap out some tools after carrying it a bit.
I took one side of a Curl, and one side of a Bond, and put them together. -
If this has not been done before, I would dub it the Burl.
-
A quick update to the 'Herman Wave'. It was now further modified into the 'N Wave' as I decided to take a bit more off of the serrated blade, add a strap cutter there and then make room for the flat bit holder to hold a bit in the tool at all times (I chose a glassbreaker bit like the one from a Skeletool RX to pair with the serrated and hook blade as a nice emergency setup).



-
your N Wave customod. Does that bit holder lock up as well as inside? -
Tool Name: Black camouflage with tiger stripes, spots, and a chaotic pattern.
Full name: Tiger waiting for prey in a nylon sheath or Rebar BCTC 2026.
Basis: Leatherman Rebar
Aim: To try it out of curiosity to see what happens.
Mods: What I did:- replaced the pliers with ones from Kick;
- removed the springs and forks inside the frame; I sanded the overhangs and ridges on the pliers using fine sandpaper wrapped around a drill bit (advice: sand a little at a time, without rushing; after sanding, put the pliers back in place, test how easy it is to open and close them, and keep doing this until you’re satisfied) — I got an easy-to-open mechanism;
- I swapped the large slotted screwdriver for a chisel (I sharpened the broken large slotted screwdriver from Kick).
- I moved the lanyard ring to another frame; in its place, the blade from the Kick fit perfectly.
- And I added a kamo pattern, but not everywhere.
The tul folds well; there are no gaps between the handles, and the pliers don’t touch the tools — almost (the flat side of the pliers lightly, barely touches the Kick blade at its very end, but without making a sound or applying any force).
I’ll take a look at the tools (later); maybe I’ll replace something.
Links:


-
@Aku Harimau said:
Tool Name: Black camouflage with tiger stripes, spots, and a chaotic pattern.Full name: Tiger waiting for prey in a nylon sheath or Rebar BCTC 2026.
Basis: Leatherman Rebar
Aim: To try it out of curiosity to see what happens.
Mods: What I did:
replaced the pliers with ones from Kick;
removed the springs and forks inside the frame; I sanded the overhangs and ridges on the pliers using fine sandpaper wrapped around a drill bit (advice: sand a little at a time, without rushing; after sanding, put the pliers back in place, test how easy it is to open and close them, and keep doing this until you’re satisfied) — I got an easy-to-open mechanism;
I swapped the large slotted screwdriver for a chisel (I sharpened the broken large slotted screwdriver from Kick).
I moved the lanyard ring to another frame; in its place, the blade from the Kick fit perfectly.
And I added a kamo pattern, but not everywhere.The tul folds well; there are no gaps between the handles, and the pliers don’t touch the tools — almost (the flat side of the pliers lightly, barely touches the Kick blade at its very end, but without making a sound or applying any force).
I’ll take a look at the tools (later); maybe I’ll replace something.
Links:
Cool mods !

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login