Leatherman Flattened Bit Extender
-
I know that one of the downsides of the Wave/Charge flattened bit driver is the lack of reach. I was thinking about the problem, and I realized all that needs to be made is a flattened bit extender. So I built a mockup in Google Sketchup. It's overall length would be 2" so it would fit in the front pocket of the nylon sheath. I don't have the tools to make a real one, but maybe my pictures will get Leatherman thinking. I would pay about $5 for one.



.jpg)
-
More pictures.


-
Isn't that the same as the regular LM Bit Extender?
-
@max6166 said:
Isn't that the same as the regular LM Bit Extender?From what I understand, it doesn't fit the flattened bits well. I might be wrong.
-
The Leatherman extender does work with the flattened bits. They are a tad wobbly in it, but do work okay. The flat extender you drew would take up less space though :) (thanks for the Sketchup tip ari, I plan on checking that out some more) :)
-
My bit extender works well, no problem

-
I have a leatherman bit extender. It works well with the flat bits. Mine actually holds the flat bits very tight. I store it along the bit kit in the pouch, fits perfect.
-
@jetscream said:
I have a leatherman bit extender. It works well with the flat bits. Mine actually holds the flat bits very tight. I store it along the bit kit in the pouch, fits perfect.I guess I'll have to get my hands on one.
-
I think it is still a good idea though.
For one, it is much slimmer. And though the LM version works fine for some, a few others have complained that the flat bits wobble a little.
It would complicate things, but is that little spring that comes down in the center notch of the LM bits necessary to hold them in place?
-
I think that this is a nice idea.
From my experience, the lack of reach is most common wiht the smaller bit sizes though. With those, the base of the bits is the limiting factor. That flat bit extender wont adress this problem... -
So who has the metal tools to make one of these?
-
toothrot made one for me. it takes only regular 1/4" bits which is nice because they are like a dime a dozen. mine lives in the back pocket of the sheath. works great for me
-
-
-
So who has the metal tools to make one of these?
Everything on your design would be pretty easy to make ari, except for the flattened hexagon hole. :(
Would it be easier to produce in two pieces and then attach them together? Like this:
That would indeed be the way to do it. Unfortunately though, a wire EDM machine would be needed for the hole, and they aren't common. :-\
I'll send off a PM to member DoughDTD and see what he can do. :)
-
So who has the metal tools to make one of these?
Everything on your design would be pretty easy to make ari, except for the flattened hexagon hole. :(
Would it be easier to produce in two pieces and then attach them together? Like this:
That would indeed be the way to do it. Unfortunately though, a wire EDM machine would be needed for the hole, and they aren't common. :-\
I'll send off a PM to member DoughDTD and see what he can do. :)
Sounds good. What metal would be best for this? Tool steel like the bits? Also would springs or notches or magnets be needed to keep the bits in? My Wave is still being fixed, so I don't know how Leatherman keeps the bits in place. On my 1/4" drive extender I used as a model, a magnet holds the bits in.
@J-sews said:
thanks for the Sketchup tip ari, I plan on checking that out some moreI use Sketchup a lot because it is easy and free. It's a great piece of software if you don't need the power of an expensive CAD program. I'm learning VectorWorks in school for theater, but I'm not as fast as I am in Sketchup. The model took like 20 minutes.
-
Just go the simple route and make some long bits. I'd be in for a couple.
Quick PhotoChop

-
I agree. Long bits would be tons simpler and cheaper to make. My brother has a wire EDM business. The wire cutting would cost about $75 per piece...maybe more. That doesn't include machining, drilling, hardening and grinding the steel before hand. There are other issues here that make this method unrealistic.
Yeah... Long bits...Long flat bits. Not easy to make but doable I think.
Dave
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




