Gerber: Lighting the way.
-
Alrighty, I got it over with-
/topic/2058 -
@Defender said:
Gerber does have some good lights... I am still drooling over the Infinity, and I'll probably grab it this week when the wife isn't looking!Anyone know who makes the lights for Gerber?
Def
They (I suppose Fiskars?) bought out CMG who made the infinity first. The design was improved (put an extra spring in to stop the battery rattling). They seem to have got the brightness level/battery duration just about right for a small personal torch. If you do get one use a Lithium battery in it, seems to last forever.
Dave
-
I remember being very tempted by one years ago, but like and idiot I did'nt get one ::)
I'd does look like a better set up than the lighting on some sak's though :)
-
FWIW, when the Nautilus came out,the AARP magazine gave it a thumbs up.
-
@665ae said:
I've been eyeing one of those Nautilus' for a while now. I'm curious to hear what you think of it.I tried it out once, but didn't buy it. The flashlight flip out was okay but too gadgety. The lock didn't work very well either. It was very plasticky feeling. Didn't inspire much confidence. I heard that they had lots of issues with it.
-
If you want to make the LED a tad more floody and good for close-up work, remove the LED and scuff up the dome with steel wool or a green Scotchbrite pad, it'll get rid of the ringiness in the yellow LED, but you lose throw, it dramatically smooths out the beam
-
@MacTech said:
If you want to make the LED a tad more floody and good for close-up work, remove the LED and scuff up the dome with steel wool or a green Scotchbrite pad, it'll get rid of the ringiness in the yellow LED, but you lose throw, it dramatically smooths out the beamThanks for the tip mate :) it does seem a bit extreme though, does it significantly decrease throw?
-
It depends on how much you scuff it up, go slowly and constantly check your progress, you can't un-scuff it
I have an "Aviatrix" LED upgrade ring for my SureFire A2 Aviator, low red and high white LED, in stock config, the red LED is rather bright, ringy and throwy, so I scuffed it up to smooth the beam and dropped it's throw by about 50%, which is what I wanted anyway
-
@MacTech said:
It depends on how much you scuff it up, go slowly and constantly check your progress, you can't un-scuff itI have an "Aviatrix" LED upgrade ring for my SureFire A2 Aviator, low red and high white LED, in stock config, the red LED is rather bright, ringy and throwy, so I scuffed it up to smooth the beam and dropped it's throw by about 50%, which is what I wanted anyway
hmm, I might give that a go on one on my led lites
cheers :)
-
In my flashlight life I am generally of the type that wants maximum brightness and throw. Damn the perfectness of the beam if it means sacrifice of one of those two qualities!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login