Early riveted Leatherman PST's
-
Supratentorial has a very early model Leatherman PST for sale in the trade forums. The discussion got interesting enough that it seemed worth moving here:
@supratentorial said:
marked "LEATHERMAN" in large block letters on handle
marked "Leatherman, Japan" on the drop point blade.....@supratentorial said:
.....Here are some photos:

For comparison, here are some shots next to an unused PST with a full blade:



Here's a shot that's overexposed with the flash to better show the grind marks on the blade:

The previous owner did a really bad job attempting to grind the edge. The blade has grind marks and the edge would need to be reground if it is going to be used. Of course, these aren't common in any condition so it may be better to keep it as is.
-
-
@supratentorial said:
They're a pain to find but I've managed to collect a few early PSTs. I had intended to keep this one as a user but I thought someone else would appreciate it more. You're correct that it was produced before Leatherman started dating their tools. I think they started adding a date sometime between 1991-1993. Do you have a more exact date?I can't give a better guess than yours (1984) for the date of manufacture. But it's something that interests me.
I think the basic order is:
"Pocket Survival Tool"-->"LEATHERMAN Tool"-->"Leatherman Tool"-->Blade ChangeI've noticed some mixing and matching between the different logos. For example, I was recently outbid (Joe got me again! ;) ) on an early model PST marked "POCKET SURVIVAL TOOL" on one handle and the common small lettered "Leatherman Tool" logo on the other handle. I don't know if it was a factory repair. But I doubt it was. I also have some PSTs with the early drop point blade and the common "Leatherman Tool" logo on the handle. It suggests that a few of the logo changes may have occurred within a short time frame. Do you know more about it?
...... -
I've seen some mixing and matching on these early tools myself. It makes sense I suppose; at assembly, if they had plenty of old handles (for instance) but ran out of new plier heads (for instance) the resulting finished tools would be a mix-match.
I've got a large-font LEATHERMAN with a Japan drop point blade like you have pictured, and another one with a USA drop point blade. Must be in between sometime Tim Leatherman was bringing his blade production back home.
-
They look better rivited imo.
-
-
They look better rivited imo.
At first they didn't. The very earliest ones (bottom tool pictured below) had rivets with hollow bases. It must have been easier to flare the ends over and peen them that way. In any case, it left a cavity in each rivet.
I agree with you there. :-\
-
@supratentorial said:
I think they started adding a date sometime between 1991-1993. Do you have a more exact date?I previously thought they had added the dating system earlier but I bought an undated PST (common logo) that was boxed and the paperwork has a 1990 copyright. If they didn't start labeling the tools until then, it would mean that some of the Mini tools also lack a manufacture date. Based on conversation with the seller of the PST, it seems unlikely that the paperwork is a mix up from another PST. What's the earliest date that you've seen? Do you have a better estimate of when they started adding the manufacture date?
-
I've no idea on exactly when they started dating their tools. ??? My earliest date code is 0993
Anybody else? What's the earliest date code you've got on a Leatherman tool?
-
1293 on one handle, and 1193 on the other, looks like you beat me by 2 months. :( This is a competition, right? :D
-
0793 on one handle and 0893 on the other.
-
Someone on this old thread metioned having a '91 with no date stamp. Not sure how he knew it was a '91 though...
http://www.bladeforums.com/forums/showthread.php?p=3859612#post3859612 -
@NeitherExtreme said:
Someone on this old thread metioned having a '91 with no date stamp. Not sure how he knew it was a '91 though...
http://www.bladeforums.com/forums/showthread.php?p=3859612#post3859612Yes I remembered that thread as we were posting here. Seems like a lot of evidence pointing to 1993 as the start of date coding.
-
@NeitherExtreme said:
Someone on this old thread metioned having a '91 with no date stamp. Not sure how he knew it was a '91 though...
http://www.bladeforums.com/forums/showthread.php?p=3859612#post3859612Someone's using their noggin'. Thanks for the link! I think we may have reinvented the wheel.
If I read the topic correctly, it was narrowed down to "November 93, and after 91"
Based on the info we've come up with thus far...it looks like we can narrow it down to: 1991 - July 1993. That's another 4 whole months! :D
-
Every little bit helps! :D
By the way, has anyone asked LM directly?
-
Who? ;)
...no, that'd be the smart thing to do!
-
Might ruin all the fun and teamwork... :D
-
Here's a photo of my '93 PST. Similar ones are commonly for sale on ebay.
-
I see it has the sabre blade. (Do we know when they changed to the smaller 'clip' in the clip point?)
-
While we're on the topic (uh, well sort of), has anyone been able to find any 1983 Leathermans? Its my birth-year, and I'd love to be able to get one, but I have the sneaking suspicion it'll never hapen. :'(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
