Old Huntsman, which version, how old?
-
And even more...


-
It looks like an Economy scaled Huntsman with no Hook as you have said. This would date it to around 1991-1992 since it has the sewing eye in the Awl but no hook.
Typical economy scales were made with a Hot Stamped triangular Swiss Cross and Shield and no insert slots(toothpick and tweezers). Some economy knives might have been made leaving out a tool as well like your model here that has no hook.
http://www.sakwiki.com/tiki-index.php?page=Hook - Hook date details
http://www.sakwiki.com/tiki-index.php?page=Reamer - Awl/Reamer date details -
Thanks, that might be possible! There is some kind of engraving on the larger blade which contains the address of the company, and it has the 4-digit ZIP-code we had until 1993. So it is definitively pre 1993.
-
You should also keep in mind that Victorinox did produce custom runs of knives for customers and this might be something like that. I have seen other custom knives made with an odd assortment of tools or missing tools that it might have if bought from their regular line.
-
I don't think that this is a custom run. The "engraving" says that it comes from a quite small local company, and I don't believe that they ordered a custom knife from Victorinox.
-
Where is the key ring attachment -in the pen blade spacer or on the opener backspring?
Best date I'd give this right now is between 1987 - 1991. Like stressmaster said, the hook appears in 1991, so this was made before that. Since this is an Eco knife, there is no grooved corkscrew to look for (all Eco knives had solid corkscrews AFAIK). The tang stamp indicates a 1987+ date. Hole in the awl is 1986+. Most likely it has the key ring attachment on the pen blade spacer, so I'd put it in the 1987 - 1990 range.
-
Where is the key ring attachment -in the pen blade spacer or on the opener backspring?
Help me with this, please. I am not familiar to all the layers and how they are named

Most SAKs have a keyring attachment point (not all) that is either a part of the spring that runs underneath the can and bottle openers or is on a separate piece of metal that slots in next to the small blade. I hope that helps :)
-
@Neil said:
Most SAKs have a keyring attachment point (not all) that is either a part of the spring that runs underneath the can and bottle openers or is on a separate piece of metal that slots in next to the small blade. I hope that helps :)Yes, that helps, thanks Neil :)
The keyring is on a seperate layer next to the small blade. The tip of the large blade points right onto it when it is closed. (My new Huntsman lite has the other keyring attatchment point. I never realized that it was a part of the springs that move when I open the bottle opener
)I found another detail on http://www.sakwiki.com/tiki-index.php?page=Scissors about the scissors:
In 1990 Victorinox redesigned the scissors spring and handle again. The spring now has a "cam" end which is a slightly inverted cup. This design change was to aid in keeping the spring in constant contact with a newly designed scissors handle that has a "guiding groove" to the back side of the movable handle.
The SAK has no guiding groove on the back side of the movable handle, so it has to be pre 1990, I guess.
-
@Turnstone said:
The SAK has no guiding groove on the back side of the movable handle, so it has to be pre 1990, I guess.Yep - in almost every case, if it has that groove, it has the key ring attachment on the opener backspring. I looked at some of my eco knives last night, and it turns out I have the exact same knife. I date between 1987 and 1990.
-
This was very helpful. I have almost the same knife. Same scales and tools BUT the awl has no hole and the other side of the blade has 'economy' written on it.
Can anyone estimate a date frame for mine?
-
@SteveMr170 said:
This was very helpful. I have almost the same knife. Same scales and tools BUT the awl has no hole and the other side of the blade has 'economy' written on it.Can anyone estimate a date frame for mine?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
