Spork add-on
-
Another idea derived from staring at my PS4 for too long trying to figure out how I can improve it...
This basically requires two equal-ish length tools on opposite sides of the handle (would work with only one, but more stable with two) so it's not only for the Squirt. In fact, this only works on my PS4 because the stock PS4 has a file instead of the small flathead and awl, so you'd need a P4 to be able to duplicate this.The pictures speak for themselves. This shoul dbe made out of metal with some sort of spring/magnet/etc mechanism to hold it in place properly. I made a "prototype" using a spoon and some FIMO model clay (hardens when baked at 100C for 30 minutes) just for the sake of it. A metal version made properly would be much smaller.
3D model of the actual idea:




Bad FIMO prototype spoon:



-
You have some very interesting ideas Andreas.
I bet you find a way to attach a lawnmover to a Surge in the near future.. ;) :D -
Interesting Idea !

What about adding more functions to the Spork Module ?
That way it will work as a One Piece Tool on its own ! -
You seem to be very keen on graphically designing your mods, which is an admirable skill if it helps you to visualise your mods. Not everyone possesses the skill to translate tactile objects back and forth between graphics software (which may be why your other thread fell a little flat - I've found that most tool freaks I've met are tactile folk rather than graphical). In a similar way, some people cannot see the finished building when they look at the blue prints before the build takes place. Everyone has different equally valuable skills.
Regarding the mod: what would you use the spoon/spork for? It looks like a massive difference in scale. Teeny tool and cooking spoon? I see singed knuckles in your future :ahhh
I'll have to dig out the pictures for you of the tools that Son of HK made when he was about 4, he was keen on Plasticine as an adhesive too :D Mind you, he prefers graphics software now.
-
If you want to make a slightly more elegant proto, I'd suggest a metal filled epoxy putty, like Kneadatite Brown. The stuff sets hard, to the point that filing and machining can be done on it. While it is still soft, it can be molded like a stiff polymer clay. I'd suggest putting a layer of release agent on the PS4 if you went that route. I usually used a brushed-on glob of Chapstick or similar.
-
If only there was a miniature version of a blade exchanger in mini-size for the Squirt & Juice models that could be replaced with one of the tools. That could open up more possibilities for the tools and add-ons! Would be a lot less frustration in modding too.
God I wished I had the knowledge, know-how, and the tools to work on this myself instead of just texting my ideas!

-
@Xelkos said:
If only there was a miniature version of a blade exchanger in mini-size for the Squirt & Juice models that could be replaced with one of the tools. That could open up more possibilities for the tools and add-ons! Would be a lot less frustration in modding too.God I wished I had the knowledge, know-how, and the tools to work on this myself instead of just texting my ideas!

The size of the Squirt makes that difficult, while the lack of pivots on the Juice makes it difficult. The actual part needed wouldn't be too hard to make
@SlackOne said:
If you want to make a slightly more elegant proto, I'd suggest a metal filled epoxy putty, like Kneadatite Brown. The stuff sets hard, to the point that filing and machining can be done on it. While it is still soft, it can be molded like a stiff polymer clay. I'd suggest putting a layer of release agent on the PS4 if you went that route. I usually used a brushed-on glob of Chapstick or similar.Kneadite sound awesome, ordered a bit from ebay!
-
I've used a couple of different flavors of Kneadatite. The Green is a more rubbery substance, originally designed for use in plumbing. Still gets hard, but it can rip if you torque it enough. It is pretty popular with miniature wargamers, since it is a nice medium to modify gaming pieces and make new figurines.
The brown is a lot more sturdy, but a little harder to work with. You can mix the two as well to create a slightly flexible but resilient combo. Also used to mix Green with other self-hardening epoxies to get different desired results. I used to scale model quite a bit, and having the ability to rough out a shape then work it down to the proper form was quite handy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
