Question about the removable bit driver
-
Hey everyone,
So I wanted to purchase a Victorinox Swisstool Spirit Plus, but after trying it out, I decided that I instead wanted the Spirit S, because the scissors let me down. However, I still want the bit driver and bits.
So, my question is the following: Does the Leatherman removable bit driver fit the Phillips driver on the Victorinox tools?
Cheers
-
Anyone?
-
I don't have my tools with me to try it, but I think the phillups might be too big for the removable bit driver. Again not sure.
-
Is that true for both the Spirit and the regular SwissTool? Thank you for the answer, although I would appreciate it if someone confirmed it.
I may look into getting a standalone bit driver. I don't fancy the Victorinox one that much, if they made something like the bit driver in the Cybertool in a dedicated tool I'd be very interested ;)
-
Wup, sorry I missed this thread earlier BJ :P

The Leatherman Removeable Bit Driver only sort of fits the Spirit phillips. :-\ It would work in a pinch, but it fits pretty sloppily. I would not recommend it. :(
The Victorinox accesory bit driver is pretty slick though.
Even better is the Vic ratchet.
Are you opposed to both of those? ???

-
I guess I don't have anything special against the Victorinox driver, I would have to try one out in person to see how it feels. It seems excessively bulky and heavy. I'll try and search local shops for it.
The Topeak ones someone else pointed out in another thread seem nice, but again, I'd have to try one out in person to really confirm it. http://www.topeak.com/products/Ratchet-Series?WYSESSID=2i5kud1s70plfskhtlpp1um3p6
It only has the ratchet available, though, so it may not be adequate if a longer shaft is needed.The Leatherman removable bit driver seems like a very elegant solution, and would be pretty much great for every situation except if you needed to have pliers in one hand and the driver in another, for whatever reason.
-
Much as I like the Vic ratchet, the Topeak one is even nicer.
Not only is it even more compact, it has a reversing lever! 8)
No extension piece though, which is not good. :( You'll find that neither the Topeak or the Vic ratchet is worth a plugged nickel without the extension. Seriously. You can't get any torque using the socket in the end of the handle without something to stick in the ratchet hole. (if that makes sense)
-
More on the Topeak Ratchet Rocket: /topic/4908
-
@J-sews said:
....
No extension piece though, which is not good. :( You'll find that neither the Topeak or the Vic ratchet is worth a plugged nickel without the extension. Seriously. You can't get any torque using the socket in the end of the handle without something to stick in the ratchet hole. (if that makes sense)On the RocketRatchet RX you can get by pretty well without the extension. One of the tire change bars has a 1/4 hex cut-out and so it can be use as a wrench handle sort of like the vic wrench. It does not work too well in some tight places because the cutout is a little bit too far in from the end (maybe for strength?). However you can stick the bit in the end of the ratchet handle, stick the wrench on the 8mm hex-bit, and insert the 8mm bit into the ratchet. Now you have a great torque handle just as if you had inserted an extension into the ratchet head.
-
This picture might make it clearer.

-
This one is not as nice as the others but it is not bad and it is cheep. http://www.harborfreight.com/hand-tools/screwdrivers/8-piece-right-angle-screwdriver-92630.html The Leatherman universal works on the Spirit but it fit is a little loose.
Mike
-
I'm always surprised by the apparent necessity of a supplemental driver to be paired with a multi. I've always found an adjustable wrench to be the natural companion to any tool with a driver already built in, be it a pliers based MT or a SAK.
I can see where using the pliers and a separate driver can be necessary if that is what you had on you, but..
Wouldn't it be better to use the MT driver and a wrench? Additionally, this combination allows for using the pliers and wrench, while the MT and driver pairing does not. And how often does one need two drivers at the same time?
Just curious about this. Maybe there is some common scenario I just haven't encountered somehow? Or perhaps this is trade specific?
Seems to me like Vic must find it to be worthwhile... But why?
MT and an adjustable wrench or even a Latshaw makes better sense to me.
-
You are right about MTs and wrenches pairing up well. Where i find the ratchet to be a big help is putting togather boxed furniture kids toys like Kozy cars and doll houses.
Mike
-
Ok> I looked all over and can't find a pic online, but Home Depot sells a wrench with a 1/4" gear driver on one end that will hold any 1/4" screwdriver bit. on the other end is a 5/8" driver that has a removable adapter that turns it into a 1/4" socket driver. both ends are bent to offset them like a regular closed box wrench. both gear drivers are reverseable. it is sold under the Husky name but is made by Stanley. its about 6" long and very flat. even with the bends and the adapter it is pretty small and light. I have found <u>nothing</u> better for getting into really tight spots to reach screws. it is very portable and could fit into the side pockets of a leatherman sheath. It costs about $20
-
You mean this thing Husky 5/16 Ratcheting Wrench Set

-
@ICanFixThat said:
This picture might make it clearer.Ah, I get you.
I'd never thought of that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login