Taking Apart A PST
-
I would really like to be able to dismantle a couple of my PSTs for some deep cleaning (and in the future, possibly some modding) but I haven't got a clue how to do it. Is there a wrench or a screwdriver bit or something that will loosen the screws (on the American-made ones) or any way at all to get the Japanese (riveted) models apart? Any tips would be greatly appreciated.
Thanks!
-
You can't take a riveted PST apart without ruining it, but you can come along way with WD40, toothpicks and cotton swabs. :)
The Knurled screws requires special tools as shown in the top of the pic here and can't be found in any hardware store. :-
So your best shot if you really want to take it apart is to use a set of regular pliers, but with the risk to ruin the screws.. -
I have tightened and loosened my Supertool 200 with a pair of needle nose pliers. It has the same type of knurled screws.
But for deep cleaning, warm soapy water, a toothbrush and a running tap can get just about everything out. -
Knurled screws come off easily with a small pliers like the Juice and small vice grips like the Crunch. I've use both to remove the knurled screws. One end goes nearly all the way through the handle, the other is a long screw that meshes with the others inner threads.
Worst part is getting them ultra thin washers to line up when reassembling. Might want to make a jig for this. Seen one in the Making A Leatherman movie too.
-
2 pair of carefully adjusted vice grips worked great on my old wave.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login