Not expecting much (MP400)
-
As most of you know I had a MP400 back in August lastyear and sold it because the scissors weren't up to much .Well I kind of missed the little tool and as its std issue for H.M Coastguard rope Rescue teams I thought I really should have one in my collection .
Now I'm quite well known for my attention to detail and I can find fault with just about every multitool I get , blades too loose, plier play ,gaps etc. and just about anything else that can get missed , overlooked or slip through quality control .
So when the MP400 arrived I really wasnt expecting it to be any different .What a pleasant surprise when I gave it a good look over ( with a magnifying glass ::) ) and found I couldn't fault it anywhere . Apart from the black stuff on the plier head ( grinding paste ) which I can wipe off and the burr on the blade which didn't bother me as all my new blades go straight on the sharpening stones regardless of how they are out of the box ( with the exception of certain drawer queens ) it had no faults what so ever :o
The last three tools I bought were all Leathermans and I could find faults with all of them .
So I started to look at the MP400 in a slightly different light and thought I'd put it to work and see how it bears up .
So far I've used the large flat driver to screw on a door handle , the phillips also as I only had three slot screws so I found a phillips to make it up to four . Again I used the large flat to screw in a screw that fell out of the computer chair . I used the can openers on a tim of beans to see how it would perform . Now I think Vic do the best all round can openers and after using the Gerbers I still think Vic do the best can openers lol it wasn't good at all but it did open the tin so I wouldn't have died of starvation .
I also used it to force open the CD rom drive on my Father in laws computer as it had jammed .So apart from the can opener not being very good although it did open the can and is alot better then SOGS I can't really fault it yet and believe me I will tell you all about it the moment it does fail .
The story so far ........... Great little tool and my Birthday carry :D
-
Happy Birthday Dunc

Congrats on the good catch ... is it actually a new one or an older model??
-
@50ft-trad said:
Happy Birthday Dunc
Congrats on the good catch ... is it actually a new one or an older model??
Its a new model and I can confirm that the bottle opener works very well ;)
-
And on the second bottle its still working fine

-
Good to hear from another happy Gerber user. Gerber seem to come in for a lot of stick here, some of it well deserved I'll admit, but not all of it. The MP400 and MP600 are two tools that seem most likely to satisfy when it comes to build quality, or so it seems to be most of the time. I know I'm perfectly happy with my MP600, happy enough that I'd certainly consider a MP400 at some point. :)
-
We'll be expecting a full review soon on all the features Duncanheimer!
(If you ever finish up with that bottle opener test that is) ::) ::) :D -
So, how did that bottle opener hold up after multiple usage then? :D
-
Glad you got a winner!!! And as I allways say , If it works for you fantastic!!
But I got to ask and it really isnt any of my buissness. But if it is issue why did ya have to buy on? Couldnt you just go to suppy for one? Im sorry if this is a stupid question but it tweeks me when you serve and have to buy kit.
-
@hawkchucker said:
Glad you got a winner!!! And as I allways say , If it works for you fantastic!!But I got to ask and it really isnt any of my buissness. But if it is issue why did ya have to buy on? Couldnt you just go to suppy for one? Im sorry if this is a stupid question but it tweeks me when you serve and have to buy kit.
They only supply one tool to each team ::) and what with me being a bit of an enthusiast :D I want my own lol
-
Just had another look at the can opener .What I've found is the tip of the can opener has a tendency to wander in to center of the lid as you go round the tin . This means you have to keep starting again and you end up with just a jagged mess that looks like a homemade Shuriken :( The trick is to be conscious of keeping the tip near the edge and then it performs ok . Maybe its because I'm left handed

-
That is great to hear Dunc
-
@Dunc said:
Just had another look at the can opener .What I've found is the tip of the can opener has a tendency to wander in to center of the lid as you go round the tin . This means you have to keep starting again and you end up with just a jagged mess that looks like a homemade Shuriken :( The trick is to be conscious of keeping the tip near the edge and then it performs ok . Maybe its because I'm left handed
Interesting. I must confess that I've never tried the can opener on mine. :-\
-
Well thats Saturdays project for you Bob . Beans for Tea ?
-
I've always had a thing for the 400...
No flaws in mine either, but overall it's just a joy to use...
-
@Gareth said:
Good to hear from another happy Gerber user. Gerber seem to come in for a lot of stick here, some of it well deserved I'll admit, but not all of it. The MP400 and MP600 are two tools that seem most likely to satisfy when it comes to build quality, or so it seems to be most of the time. I know I'm perfectly happy with my MP600, happy enough that I'd certainly consider a MP400 at some point. :)Well I found myself considering an MP400 a lot sooner than I thought I would, as I found a stall selling some at a car boot sale. Most had some real issues; broken locks, chewed up tools, gunged up with some very dodgy looking stuff, but one was in good nick needing only a touch of oil to bring it back to full working order. So a good condition MP400 for the grand sum of £10. :) I'm a happy chap. :D
-
Good to hear from another happy Gerber user. Gerber seem to come in for a lot of stick here, some of it well deserved I'll admit, but not all of it. The MP400 and MP600 are two tools that seem most likely to satisfy when it comes to build quality, or so it seems to be most of the time. I know I'm perfectly happy with my MP600, happy enough that I'd certainly consider a MP400 at some point. :)
Well I found myself considering an MP400 a lot sooner than I thought I would, as I found a stall selling some at a car boot sale. Most had some real issues; broken locks, chewed up tools, gunged up with some very dodgy looking stuff, but one was in good nick needing only a touch of oil to bring it back to full working order. So a good condition MP400 for the grand sum of £10. :) I'm a happy chap. :D
Thats a good score
don't forget , pics or it didn't happen
does it have the old style blade , and did you get a sheath too ? -
No sheath and, happily, the old style blade. I think I've got a old Gerber sheath that might fit it kicking around somewhere though, if not then it'll go in a flat nylon LM sheath I use quite a bit.
-
Here are some pics, just to prove to Dunc I really do have one. :D



-
Oooh, that one does look to be in fine shape. :) Good score Gareth!

-
Nice one Gareth
I can see from your photo its the old blade but I can also see the plier jaws are a little different
Bugger here we go again :ahhh :ahhh :ahhh :ahhh 
I'll take a better pic of my plier jaws and lets play "when did that happen " again ::)
Bob how did you get on with the can opener ?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
