not so sure about compound leverage
-
The one thing I really don't like about compound leverage is that when trying to turn a bolt you have to open the plier handles far apart making them useless with one hand.
-
Cutting chain link fence, hmmm... is this in the same category as cutting barbed wire? Since you aren't plugged in we had another thread talking about what we would call the "Vandal" model. Looks like this would classify.
-
the sog powerlock in question is the older version, no new gear covers or plier head design. the core and the powerlock are almost exactly the same length, though the core is substantially thicker. even the pivots are the same distance from the handles to the plier tips, so that should cancel out any possible leverage gains there. i would have to guess that barb wire is much harder to cut than chianlink fence, because i have seen a lot of rusty barbed wire, which leads me to believe it is carbon and not stainless. Thus i would tend to think that it is a higher RC and consequently would be harder to cut, but i'm not too sure about this.
Can anyone actually explain how compound leverage works? i mean i know the principle of doubling the distance halves the force, but im not sure how exactly that happens when one adds gears to the handle tops. -
I've never seen stainless chainlink. Chainlink fence is usually galvanized.
-
@kronos said:
the sog powerlock in question is the older version, no new gear covers or plier head design. the core and the powerlock are almost exactly the same length, though the core is substantially thicker. even the pivots are the same distance from the handles to the plier tips, so that should cancel out any possible leverage gains there. i would have to guess that barb wire is much harder to cut than chianlink fence, because i have seen a lot of rusty barbed wire, which leads me to believe it is carbon and not stainless. Thus i would tend to think that it is a higher RC and consequently would be harder to cut, but i'm not too sure about this.
Can anyone actually explain how compound leverage works? i mean i know the principle of doubling the distance halves the force, but im not sure how exactly that happens when one adds gears to the handle tops.I can see how it works in my head, but you need a clever person to be able to explain it, I'll see if I can find one.
-
Well as i see it when you press down on one handle not only does the handle affect the plier jaw that it is attached to but it also via the gears pushes the other handle/jaw to a close, thus applying force to one side does "double"* the work, on a normal multi the only jaw affected by applying a force to one handle is the jaw that that handle is attached to. But if you have a longer handle on the tool then you will be able to apply more force at the end of the lever due to their being a greater distance between the line of action of the force and the pivot.
Thats how i see it anyway. I think its right but i would be happy to be proven wrong!
Roadie
*i say double but it will be slightly less due to friction in the gear system
-
I totally agree about the stranded wire cutter cutting amazingly. I have used it on galvanized fence to free a trapped dog with fantastic results... I was always a fan of the SURGE/CORE!
-
Take a 5 gallon pail and fill it with water.
Grasp the pail's metal handle with the SOG PowerLock's plier jaws. While, holding the PowerLock vertically, jaws pointed toward the floor, pick up the pail of water. Hold the buck off the ground for a few minutes using the PowerLock's grip.
Try the same thing with the Core.
Compare how easy/difficult it is to keep the pail from slipping out of the plier jaws of each tool. You should be able to tell the difference between the two tools with respect to how much you need to squeeze the handles to prevent the pail from falling out.
-
I've no real experience with the bigger leatherman tools but I acn comment on the difference the compound leverage has made for my dad .This could be a great excuse for using the money Dunc saved me on a Vic Rescue
-
Feeling another spend coming on mate :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login