Received Spirit Today
-

I received the Victorinox Spirit S I ordered from Felinevet,all in good order. Upon iniitial examination there was an evident higher quality of fit,finish,and construction as opposed to the multi-tools I have thus far encountered. Tools moved smoothly and locked into place positively. The pliers can be deployed one-handed if you are dextrous enough to do so. Pliers move into place smoothly and ther must be detents in the system as there are audible clicks. The overall impression is of a superior quality tool. I decided to test some of the tools. I eschewed some for the simple reason that they did not apparently vary significantly from the tools in Victorinox SWAK's. The first thing I tried were the wire cutters,they did successfully cut a heavy-gauge fence wire ,this did require some twisting as the hard wire notch is quite small. I next cut a piece of 2-strand barbed wire,I twisted the wired apart first so they would fit into the notch. This was done with no evident damage to wire cutters. I also cut some smaller gauge, stranded electrical wire which it did quite smoothly. The next tool tested was the file which I used on a piece of bed-rail,this iron being harder and more resistant then standard angle iron. It did file away material easily enough,though it will not bite into properly heat treated knife steel. It should be noted that neither will a nicholson file. I did try the "metal saw",I found it a little awkward as it cuts on the backdraw,but it will work. The woodsaw was first tried on a 3/4" square section of pine wood,which it cut through cleanly.I then cut two branches (fallen wood,but still quite strong) .The first was 1" in diamater and the saw cut through this.The next was 2 1/4" in diameter and took considerably longer. I did get it cut,but this is probably the biggest wood you could cut with a saw this size. I tested the phillips head driver on a drywall screw in a piece of 2 x 6 . I used the driver to sink the screw deeply into the wood and then to withdraw it. No slipping was evident. The final tool I checked was the combination chisel/strong crate opener. The chisel did into wood well enough,but would be improved by a good sharpening. I used the tool also to pry up the edge of the 1/4" plywood nailed to the top of my workbench. It worked ok,there was some signs of flexing,so the tool has limits,but I wouldn't worry about using it to open a can of paint or take apart a light wood assembly. I'll probably be testing the tool more in the days to come, anything I find out I will report. Victorinox probably needs to make the wire notches larger. They are probably built it this way to avoid having someone use the tool on something too large for it to handle. Overall it's a good tool and I am considering purchase of another or a Swisstool. -
Great to hear you like it. Awesome tools aren't they?
-
Glad you like it mate, it does pack an amazing number of features in to a compact package doesn't it :)
Nice mini review too, I'll look forward to your other comments on it :)
-
My new suspicion, after hearing of all these happy Spirit owners, is that the steel is laced with acid, which also explains why people need to own several.
-
Great review! I'm a bit surprised that the metal file cut on the backdraw--my Spirit file's teeth are angled forward.
-
DuckTapeHero-Yah.It works fine,haven't had a chance to check out the pliers really. Used the weird knife blade (Freddy Krueger shaving razor) to open a plastic package. Give it an A+ overall.
Micky D- Thanks! Now I have to decide whether I want another Spirit S as backup or to try a Swisstool. Only have money for one more. As I've said before I like the complement of tools on this multi more than any other.
Nomad-No more delusions than I normally get. :ahhh
NutSAK-Thanks! I just double-checked and it's hard to tell(damn bi-focals),but I may have been mistaken there.I cannot tell for sure until I find a magnifying glass.
-
I'd go for a fullblown swisstool, otherwise your gona have a lot of unneccassary duplication :)
-
NutSAK-You are right about the teeth they are pointing forward,to cut on the push. Had to take it outdoors in the sun and use a magnifying glass too. :-[ :-[
Micky D-Redundency is a bad thing? :)
-
@TWBryan said:
NutSAK-You are right about the teeth they are pointing forward,to cut on the push. Had to take it outdoors in the sun and use a magnifying glass too. :-[ :-[Micky D-Redundency is a bad thing? :)
Redundencty is good, but if you've got a budget to work too (I'm almost permantly skint ::)) I'd want something a bit different :)
-
I would agree. Might as well jump for the Swisstool.
Man, that is one sweet avatar Mike. 
-
MIcky D NutSAK-Guess I'll send Felinevet an email...
-
Ordered a Swisstool from Felinevet. I'm now completely broke. No more play money at all..
-
So what swisstool did you order mate ???
-
Standard swisstool ,two blades,no scissors. Why change configs if you have winning combo?

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Seriously,I doubt that you'll regret it