How do you make a file?
-
Do you want to install it on something? What about ordering the file/saw
Replacement for a leatherman surge? It's small and compact, rigid and useful with the diamond coated on one side and the aggressive wood pattern on the other. -
Well, I was thinking specifically of part of the backspring of a SAK, maybe the one with the blade layer.
-
You could just use the hook or other accessory and file a cross hatch pattern in it. The steel is soft enough that you can use a file to cut your pattern in.
-
Not much help really, but a little history: :)
In centuries past, filemaking by hand was the stuff of masters and apprentices, and the price, quality, and quantity of files produced in Europe was closely controlled by the filemaker's guild.
Files were among the most exclusive (and expensive) tools a tradesman could own. Attempts at mass production in France and England were rightly perceived as threatening the guild's monopoly, and were therefore doomed to failure. Not until the Nicholson File Company perfected filemaking machinery in America, outside of the guild's reach, was the stranglehold broken. The price of files collapsed down to the point that everyone, even non-tradesmen, could own several. :) -
Uhm... eep? Way beyond may ability.
OK, so ideas on roughening up enough to be able to strike a match... Hmmmm....
-
Get some skateboard grip tape and cut a thin piece for the back of a SAK implement or something. Since it's replaceable you don't have to worry about dirtying it up and cleaning it. And if you don't want it anymore no harm do e to the tool
-
@SuzukiGS750EZ said:
Get some skateboard grip tape and cut a thin piece for the back of a SAK implement or something. Since it's replaceable you don't have to worry about dirtying it up and cleaning it. And if you don't want it anymore no harm do e to the toolNow that's a great idea! Could even store an extra piece in the knife itself.
-
But... but... that's easy. laughs So, where does someone who's knowledge of skateboards is limited to being able to identify one and not understanding why skateboarders don't understand that they should not be in the same lane as cars at night go to look for this tape?
-
@SuzukiGS750EZ said:
Get some skateboard grip tape and cut a thin piece for the back of a SAK implement or something. Since it's replaceable you don't have to worry about dirtying it up and cleaning it. And if you don't want it anymore no harm do e to the toolFinally! A use for the multipurpose hook :D

-
@ironraven said:
But... but... that's easy. laughs So, where does someone who's knowledge of skateboards is limited to being able to identify one and not understanding why skateboarders don't understand that they should not be in the same lane as cars at night go to look for this tape?Can you find some of this over there at a DIY place?

I can post you a bit to play with if you get stuck (my stuff might be too rough :-\ )

-
you can find some really agressive stuff at the local hardware store. Walmart may sell it, but like the local sports shops.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

