Supertool 300 questions
-
Hello everybody, this is my first post here although I'm a long time lurker.
So let me get straight into my question. After some consideration, I'd like to purchase an ST 300 as my first MT but there are some "features" that have been bothering my mind. First, the way that the tools face "inside" when they are deployed can make the other half of the MT bump into something when you operate some of the tools, like the saw for example. Here's a pic to illustrate:

Second, I'm afraid that because of how the unlocking levers are placed, you can accidentally press them when operating the tools.
Are my fears unfounded? What's your experience?
Thanks!
PS: Actually the SwissTool/Spirit is my first choice but they are more expensive and harder to get here than the ST 300. I don't like the stubby bit driver on the Wave and I have no use for the mini bit driver either.
-
All tools accessed by opening the handles on a multitool have the issue of "inward facing" blades, and I must admit I can find it a nuisance at times. With a saw on something round it will mean you cannot use a full stroke of the saw at the handles will foul before using some of the teeth that would be in play once you're halfway through (or would have been in play with outside accessible tools). Outboard tools for me have two benefits - easier to get at, plus better in performance. That said, there are many models of inboard tools, and many users and fans of those models.
As for the issue of the locks, I can't think of a time I evey accidently unlocked a tool (or at least accidentally unlocking a tool ever causing me a problem). I've not got a ST300, I'm just talking of tools in general including those with similar rocker locks.
If you think either of these issues will cause YOU a problem however (we are all different in our tool use and preferences), I would suggest saving up for one of the Vic's. I have a Swisstool CS Plus and a Spirit X (type) and they are both excellent tools. You sound like you've been doing your homework, so it would be a pity to compromise.
Oh, and welcome to the forums
:D :D :D -
Thanks for the info 50ft-trad. It seems that I've to get the one of the Vics if I want a better designed tool.... But they are about 50% more expensive.... Or maybe the Wave will suffice if I can't get the Vic.... Hmm decisions, decisions.... :-\ :ahhh :D
-
Virtually all multitools will have their good and not so good points. But overall, the ST300 is hard to beat in the "man thats big" category. I think I give a little edge to the Swisstool because of its refinement and scissors, but the ST300 (of which I own 3) is right there in the rotation with the Swisstool and Spirit. The more precise pliers (relative to the Swisstool) and replaceable cutters are big selling points for the ST300. Highly recommended.

-
Hi powernoodle, could mention one thing (functionality wise) beside the pliers that the ST 300 has an edge over the Swisstool/Spirit? Maybe then I could rethink my choice :D
-
I finally decided that I want to buy.......... a Wave. Here's the obligatory pic:

I'm sure you've seen the subject a million times already ::)
ST 300: I'm bugged by the inward facing blades and saw.
SwissTool/Spirit: Too expensive at around $100. -
Good choice Paperclip. 8)

Any thoughts yet? :) -
Sure, AHB. First impression told me that this isn't SwissTool. I should have told you that the only MT that I've handled is a SwissTool. Wave finishing is much more spartan as demonstrated by rough edges and there are friction everywhere when opening/closing the tools. This doesn't mean that the build quality is bad however, because the tools have no play, they deploy perfectly, the lock system is good and functional, all functional edges are sharp, and there's no defect on the tool itself. Combined with matte finishing, Wave appears to be much more "tool" like than SwissTool, which is good in a way. I think basically I'm just echoing what has been said many times :D
Oh I should add that the nylon sheath that the tool came with is great.
-
It's much more smoother now to operate. It was rough because of being new I guess.
However I accidentally made the joint where the lanyard ring rests somewhat loose now because when I tried to pull the lanyard ring, it wedged against the joint cap. Oh well I guess I have to tighten the screws, is that the correct thing to do?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
