Me and My Super Tool
-
I've been lurking here for a while. First around two years ago but recently I found this forum again and decided to actually say hello.
I only own one MT (other than a couple of VERY cheap ones I have got as free gifts over the years) and I couldn't possibly be happier with it.
Years ago I asked my dad for a penknife. Some of my friends had the generic SAK and I was jealous. At the time I don't really think I had much need for one. He said no.
That Christmas (2000 - I was 10) I opened a fairly small present from my mum and dad, inside was a leather pouch with "Leatherman" on the front. I obviously had no idea what it was, I had never even heard of Leatherman. I opened it up and inside was a metal object that appeared to be a pair of pliers with "Super Tool" stamped on the side. I wasn't exactly thrilled... However once I learned exactly what it was I never looked back, it was far better than any of my friend's SAKs (nobody else had two whopping great knives and a huge pair of pliers!)
Since then it has been everywhere with me and I honestly don't know what I would have done without it.
I was in the cubs and scouts when younger and it always came with me. Camping the the New Forest I used it to cut down branches to build shelters, whittle away and strip branches and makeshift weapons and probably loads of other things. It was during one of these camps that my tool got its first taste of human blood. One of other boys wanted to have a look at it, he pulled out the serrated knife, asked "is it sharp" and promptly decided to run his thumb along the blade as a test. The words "hot knife through butter" come to mind.In the house it was always my first port of call for anything damaged or in need of repair (such as closing links in chains, loose screws, cutting strings/clothes tags) and was always close at hand.
In later years it accompanied me when I spent a couple of weeks doing conservation volunteering in Honduras where I think it received more use in that time than in the previous few years.
I did and still do quite a lot of diving and it always comes with me in case of any impromptu repairing of kit is needed (I'm not mad enough to actually bring it under with me though :D)
I've never kept my ST in cotton wool, it doesn't receive and special maintenance other than cleaning if it gets particularly dirty and it currently a little big grimy (but after reading these forums a bit I think I will start keeping a bit more care of it, give it a proper clean and maintain it properly). It is my every day tool and I don't think that will change any time soon. I don't tend to carry it around with me like many people here do (not usually much call for it during my average day). However it always comes with me if I'm travelling a bit further and especially if I know there will be a situation in which it might be useful.
The leather carry case has seen better days but it is still holding up strong and doesn't show any signs of failing me yet. I used to keep the ST on a lanyard so that if it ever fell out of my pocket it would stay with me, however careless closing meant that over time I kept getting the lanyard caught in the wire cutters and eventually they chewed their way through. Not had it on one since then.
The tool itself isn't perfect but I love it for its quirks. The "shoulders" on the thin end don't perfectly line up when closed, they seem to be slightly different angles and lengths. The biggest one is that one of the handles is very loose, if held horizontally it will swing down completely unsupported. I don't know if it supposed to be like that but it is useful in one way. I can easily open it one handed by simply holding it by one side and flicking the whole lot over so that it deploys very quickly indeed. The end "stops" of the movement aren't affected in any way.
I love my ST and wouldn't sell it or give it away for the world. Just wanted to tell people who are passionate about them.
Out of interest what does the code inside actually mean. I tried looking it up briefly but most links seemed to link back here. The code in mine is 0300, is it something so simple as "March 2000" or does it mean something else?
Now as much as I love my ST, I'm would love to get another. Of course it would have to be a LM (wouldn't dream of getting anything else just yet) and I want something a bit different (i.e. not an ST300). Currently looking at the Surge, Charge and Skeletool (particularly like the external blades). My ST will still be my main one so I may not need something quite so full featured (although that wouldn't exactly be a bad thing :))
And here are some pictures (click for larger). They aren't particularly good as I can't find my camera and my phone camera isn't the best.
ST and pouch
<a href="http://i.imgur.com/UKQR4.jpg" target="_blank" rel="noopener noreferrer"><img src="http://i.imgur.com/UKQR4l.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>On its own (you can see the misaligned shoulders)
<a href="http://i.imgur.com/6dVGg.jpg" target="_blank" rel="noopener noreferrer"><img src="http://i.imgur.com/6dVGgl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>Open
<a href="http://i.imgur.com/JIE2E.jpg" target="_blank" rel="noopener noreferrer"><img src="http://i.imgur.com/JIE2El.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>The loose arm hanging by gravity
<a href="http://i.imgur.com/JAoXt.jpg" target="_blank" rel="noopener noreferrer"><img src="http://i.imgur.com/JAoXtl.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a> -
Welcome to the forum.

For an 11 year old tool, your ST actually looks in pretty good condition.
-
Pretty good shape for something that's been a constant user for 11 years. Awesome!
You can tighten up those pivots if you want, it's just a matter of finding pliers small enough.
-
welcome to the forum

that's a great story, and the tool looks like its holding up okay. Maybe a small MT would complement the big supertool - something for all the time in your pocket e.g. LM juice, or squirt, something with some scissors
to complement the ST - a style CS or PS.the only unfortunate thing about having more than one MT (as happens to all of us on this forum ::)) I've found is that you don't get the satisfaction of always having that one tool that you always turn to over the years. My only MT for many years was my SAK climber, when it needed to be fixed I ended up getting into a collecting habit, and getting many SAKs and knives etc, none quite the same as the original climber.
-
A great tool, my first. Remember the day I bought it back in the 90's.
Thanks for sharing your experiences with it.
And Welcome Aboard. :)
-
That is a great story :)
I love seeing used tools that people cherish because of what they've been through together.
My 1st Leatherman was a Supertool 200, which is very similar to yours.
And I know exactly what you mean by not being able to part with it for anything.If you were to get another leatherman I would suggest the charge/wave line.
Welcome to the forums

And, by the way, the numbers stamped inside the tool are actually the production date, as you thought.
0300 = March 2000. -
welcome to the forum. My first ever MT was a Supertool as well, served me very well for about 6 years until I retired it. The loose legs seems to be a common development with older Supertools, as you say though mine still holds up fine when fully opened. :)
-
Welcome!Great story,and a reminder why we love LMs so much!
-
That Super Tool history was amazing! :D
Started out with a PST from a Marlboro catalog, and the Super Tool was my second Leatherman. The awl on that (along with braided thread and an S needle) saved my boots on a forest fire once. Repaired the split seam and sewed the leather upper to the sole, through that tough leather seam.
Used the awl for the primary hole maker, and the pliers to push/pull the needle through. Fixed my boot during lunch. It never came loose again!You know, you really should immortalize your story over here at Leatherman's Tool Tales mate.
As for tool recommendations: Charge TTi & Juice KF4 rank high on my list!
-
Great story
The Super Tool was my first too, and you brought back some good nostalgia. Thanks

-
First off Welcome aboard and we are always glad to have other people who have the same passion and love for MT'S as you obviously do. Your story is great and thank you so much for sharing it with us. If you are looking for a new Leatherman you came to the right place. Is there a certain tool set you must have for your new tool? Glad to have you and I hope we can help you find your new MT.
-
Great first post Daeraxa, and good to have you with us. :)
-
Thanks for the warm welcome all!
As for my next MT, as Jmora suggested I think I will be going for something much smaller and more portable.
So I'm looking at the Micra, Squirt(s) and the Style CS/PS. Currently I think the Style CS is winning my vote as it looks substantially different from my ST and I have a feeling that the scissors/knife combo may be more useful to me in every day life than the pliers on the PS (the knife is especially important to me). Not to say I won't be looking at something else in the future ::) -
@Daeraxa said:
Thanks for the warm welcome all!As for my next MT, as Jmora suggested I think I will be going for something much smaller and more portable.
So I'm looking at the Micra, Squirt(s) and the Style CS/PS. Currently I think the Style CS is winning my vote as it looks substantially different from my ST and I have a feeling that the scissors/knife combo may be more useful to me in every day life than the pliers on the PS (the knife is especially important to me). Not to say I won't be looking at something else in the future ::)Just beware that the keychain tools are much smaller than you might imagine. I highly suggest the Squirt PS4 in the Keychain tools.
-
I'm with the Captainon this one....I have both the Styles S-types(with another due at some point soon) and thier nice little tools.Micras are cool,but SOG Crosscuts have better hard times cutting capacity,but the Squirt PS4 has maximum utility in a small package,which is why mine lives a quiet life in my urban emergancy tin,while lesser tools see more active lives.
Mind you,with Micras arround from less than a tenner,SOGs for twentyish,theres no reason not to try them all!
-
G'day & welcome Daeraxa :D :D.
Great story mate 8) 8) 8).I hope you did not get in trouble when that duffer cub cut himself with your Supertool
:D :D.
It is fun trying new multitools mate ;) :D :D :D -
Hello and welcome. Enjoyed reading about your Supertool.
The original SuperTool is very high on my favorites list. In fact I have one on my belt at the moment. :D :D -
@MultiMat said:
G'day & welcome Daeraxa :D :D.Great story mate 8) 8) 8).I hope you did not get in trouble when that duffer cub cut himself with your Supertool
:D :D.
**It is fun trying new multitools mate ** ;) :D :D :DI`m going to try and remember that one MM. The next time some one askes me why I have so many multitools? I tell them " because its fun". :D But I do agree it is fun trying out new and different multitools.
:D :D -
I think that you should get some thing different
Maybe a SAK ? ;)
Or if you like plier-based multitool then get a Swiss tool or spirit -
G'day & welcome Daeraxa :D :D.
Great story mate 8) 8) 8).I hope you did not get in trouble when that duffer cub cut himself with your Supertool
:D :D.
**It is fun trying new multitools mate ** ;) :D :D :DI`m going to try and remember that one MM. The next time some one askes me why I have so many multitools? I tell them " because its fun". :D But I do agree it is fun trying out new and different multitools.
:D :DI reckon it is terrific/the best fun David :D :D :D. Hell its healthy than booze
:D :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
