What's your latest SAK?
-
So, my other oldie but a goodie was the Victoria Fieldmaster. A modern one came with, same auction, but it's got a lot of gunk in the blade layer, silly thing can't even be opened with the help of a screw driver, but the middle layers could be- this is interesting, and you'll see why in a bit.
The older one is on the left:

So one of the first things I noticed was the middle layers seemed to be in a odd configuration. See below, Victoria Fieldmaster, modern Fieldmaster and a modern Huntsman:

Look close. In the more modern knives, the scissors are next to the opener layer with the saw next to the blades. But in the Victoria, this is reversed! The Victoria is on the bottom in the lower pic:

I find it interesting that the Victoria era Huntsman has the same layering order as the modern knives, but with the scissors reversed so the pivot on the "opposite" side. So we've got two different sets of backsprings for what are effectively the same knife of roughly the same vintage.The tang stamp:

Given it's age, it has the tools I'd expect: the scrapper equipped can opener, the clipped small blade, solida awl, and the semi-squared phillips with the file:

What can I say, I like nail files- my SAKs go in the woods with me, and this lets me strike a match.And what the heck, the others I'll put in this post to. These were as a single lot. The price I paid... not telling, Cybertool fanatics will weep, but I will say that got these, with the ruby Huntsmen, for what I paid for either the Victorias. :D


Full bit racks for both CT34s, but one of them is stiffer than a two day dead smurf in Alaska in February, so at some point it might get parted unless I can get the gunk out- anyone know a good way to clean crystal scales without dissolving them?Having only played with these this afternoon, I know a few things. 1, it takes standard 4mm bits. 2, it isn't magnitized so my cheapie 4mm bits fall right out. 3, when I'm working on computers, I have a pair of pliers, a pair of hemostats, nail clippers (for cutting wire) and a #2 screwdriver on me. So I'm thinking... Figure out a way to put a bottle opener opposite an inline philips, pull out the pliers and scissors, and put in a wood saw and file, I might have something I like a LOT. grins
-
The 'Astronaut' has landed. BNIB chuffed to say the least.
It would appear that there may be some left!


-
Bonds of London?

-
Bonds of London?

Yes
And do they have a URL?
http://www.bondsoflondon.com/catalouge/moredetails.asp?id=2078&cid=28

-
Bonds of London?

Yes
And do they have a URL?
http://www.bondsoflondon.com/catalouge/moredetails.asp?id=2078&cid=28


There has been a thread or two on this in the past. Great to see another person excited about this discovery. Really nice knife and you get it in mint condition.
I finally got hold of the VSAKCS Astonaut a couple weeks or so ago. I was very excited to finally get this version (no woodsaw). I was surprised and very happy to find that it had the latest Stainless Steel metal file/saw. I think this could be one of the first knives to feature that? Anyway it makes it extra special.
-
@macabee said:
The 'Astronaut' has landed. BNIB chuffed to say the least.It would appear that there may be some left!

The figure "82" is embossed on the underside of the box. I assume that this indictes the year of manufacture as 1982. Having checked on SAKWIKI this would indicate that as the Astronaut model was made from 1986/91 that this maybe the 'Master Craftsman' although the box is marked Astronaut'
Any comments

-
This is my latest SAK, a mother of pearl Victoria Champion:

The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
-
The 'Astronaut' has landed. BNIB chuffed to say the least.
It would appear that there may be some left!

The figure "82" is embossed on the underside of the box. I assume that this indictes the year of manufacture as 1982. Having checked on SAKWIKI this would indicate that as the Astronaut model was made from 1986/91 that this maybe the 'Master Craftsman' although the box is marked Astronaut'
Any comments

For a good read with photos check out this thread about all the different SAK's called Astronaut.
/topic/10986@Reinier said:
This is my latest SAK, a mother of pearl Victoria Champion:Sweet! A real looker.
-
@Reinier said:
This is my latest SAK, a mother of pearl Victoria Champion:
The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
erm...Reinier: :o :o :o :o
...seriously, nice SAK
-
Thanks guys, I am really happy that I found that one! It had only been listed on eBay Germany for an hour or so when I bought it.
-
@macabee said:
The figure "82" is embossed on the underside of the box. I assume that this indictes the year of manufacture as 1982. Having checked on SAKWIKI this would indicate that as the Astronaut model was made from 1986/91 that this maybe the 'Master Craftsman' although the box is marked Astronaut'Any comments

No idea about the "82" on the bottom, but as noted in the wiki your tool configuration would be the same as a Master Craftsman. However, it can also be correctly refered to as an Astronaut; marketing was on top of the potential opportunity.
It was fun to revisit the old threads, and I edited the wiki a bit to mostly clarify and reduce verbage.
-
@Reinier said:
This is my latest SAK, a mother of pearl Victoria Champion:
The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
Very Nice One!!
-
This is my latest SAK, a mother of pearl Victoria Champion:

The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
Handsome, would not be out of place in a Tux

Very Nice One!!
-
@Reinier said:
This is my latest SAK, a mother of pearl Victoria Champion:
The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
What a beauty, very nice

-
@Reinier said:
This is my latest SAK, a mother of pearl Victoria Champion:
The picture does not do it justice: I think it has never been used, except maybe the small (clip point) blade. It has all the cool stuff like the long nail file, +PAT opener and 5 turn corkscrew. It even came in a pouch (4.0520.3) :D
I'm a sucker for Mother of Pearl.
Looks great. -
Oh dear, I seemed to have aquired another Astronaut...One for the pocket another to be kept in the box!
Have I caught a bug or what??


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
