A Pilgrimage to the Holy Land
-
You know I hate to break it you but that probably wasnt Tim Leatherman.... It's usually just a guy in a Tim Leatherman suit. Might have even been a female in there. Anyway, Im sure it was still magical, like seeing Mickey Mouse when you first step into the Magic Kingdom. Don't let it get you down
-
@Xelkos said:
How are them awesome P5Rs treating you?
Any reviews on them?
Were any of them engraved?I've been thinking about this! I just wanted to get some time under the belt with it, it does have pros & cons and I/we will post some reviews soon I'm sure

I'll just say now it is one cool light! (and I have a few, surefire, fenix, lumina, mag, gerber and other Lensors)
-
One piece of advice I can give, from owning a P5 for about a week before I broke it... don't let it go underwater. If it does, do <u>not</u> move the focus slider - get it dry ASAP.
The little dome that covered the LED element popped off of mine. Obviously the epoxy used to hold that dome lens on is allergic to moisture. Or I had a really fickle light.
As I kept telling all the companies that beta tested their products for over the past 20+ years: If there is a bug it will find me.
-
@Accujohn said:
You know I hate to break it you but that probably wasnt Tim Leatherman.... It's usually just a guy in a Tim Leatherman suit. Might have even been a female in there. Anyway, Im sure it was still magical, like seeing Mickey Mouse when you first step into the Magic Kingdom. Don't let it get you downNow you're just being mean >:(
;)
-
Very cool everybody! I'm glad Bob got to Portland after all this time, and looks like you were all very well rewarded.

So, did anyone put in a good word for the ol' KF4? :D
We sure did Luke!
And hopefully it didn't fall on deaf ears. :)I knew I could count on you, Bob. :D
-
@J-sews said:
There were juicy tidbits, but most of it was interesting stuff about retired and existing tools. We did gain some insight into how the new tool developement process works at Leatherman, including the news that it usually takes about two years for a new product to go from concept to production, and learned about some of the many steps along the way. :)But other than hints that there were more new projects in the pipeline (and there are ALWAYS new projects in the pipeline at Leatherman) the only upcoming release that was confirmed was the Rebar, coming out next spring.

I don't think I'm alone when I say: What interesting stuff do you speak of?
-
Yeah, What does Tim EDC?

-
Awesome

Can't wait to hear about this

Did this ever get explained? I'm curious as to what was going on!
Also, what does Tim EDC?

I believe it is to show the strength of the wire cutters, but I could be wrong.
-
It's to use your weight to help force the cutters through heavier items like nails.
Def
-
Tim's EDC tool is a factory stock Charge Ti :) He likes to demonstrate the tool's ability to withstand heavy duty cutting chores. First he places a large steel nail in the jaws of his Charge. The nail is so large that ordinary hand pressure alone is not enough to cut through it. So the Charge is rested in a specially made 'cradle' (see photo below) The cradle is then set down on the floor, with the clear plastic box placed over it so that bystanders aren't hit by pieces of flying nail when it gets cut through. Tim then steps on the handle of the Charge and puts some weight on it. CHUNK! and the nail is in two pieces.
Afterwards, he picks up the Charge and shows us how the wire cutters - which we have just seen cut through a heavy steel nail - are still sharp enough and tight enough to make slices in a paper business card.
Most impressive.


-
Gosh, my Charge TTi is loose in the pliers and won't cut paper or a business card anymore. Haven't cut anything heavy either. Is that the secret to keeping the pliers taut?
Have tried using a flat punch to get that pivot back in tighter yet lacking a suitable 1# or 2# maul to whack it back into place properly.
-
Thanks Bob for the aditional pic.
The big question is did you try to talk Mr. Leatherman out of the multitool cradle? :D :D -
-
@J-sews said:
Tim's EDC tool is a factory stock Charge Ti :) He likes to demonstrate the tool's ability to withstand heavy duty cutting chores. First he places a large steel nail in the jaws of his Charge. The nail is so large that ordinary hand pressure alone is not enough to cut through it. So the Charge is rested in a specially made 'cradle' (see photo below) The cradle is then set down on the floor, with the clear plastic box placed over it so that bystanders aren't hit by pieces of flying nail when it gets cut through. Tim then steps on the handle of the Charge and puts some weight on it. CHUNK! and the nail is in two pieces.Afterwards, he picks up the Charge and shows us how the wire cutters - which we have just seen cut through a heavy steel nail - are still sharp enough and tight enough to make slices in a paper business card.
Most impressive.

Awesome, thanks for the explanation!

So, who is willint to try that with their Swisstool to see if will do the same? :ahhh >:D
I know I'm not willing to sacrifice mine ;)
-
@gustophersmob said:
Awesome, thanks for the explanation!
+1
Quite a coincidence: because MTo was offline for a couple of hours, I vistited LM's Facebook page. I saw the same photo but didn't understand what was going on :D
-
Yep, I used my charge and super tool to cut through three hangers at once and both did it.
-
**This post is not mine originally, but J-sew’s post.
Due to some issues around photobucket.com, you can hardly see many important photos posted by J-sew.
So I will back up his photos and restore some of his posts.Original posted by J-sews;**
Re: A Pilgrimage to the Holy Land
Two days later, and I'm still bubbling about this trip!
What a great time! And it wasn't just the factory tour either, for what Leatherman/Portland experience would be complete without a trip to the Leatherman retail store? 
Lucky for us there was a couple of big shopping carts (trolleys) nearby! :D
Inside was a virtual cornucopia of all things Leatherman! :ahhh All the current multitools, loads of new LED Lenser flashlights, Leatherman knives, Leatherman accessories, Leatherman shirts, Leatherman water bottles, even Leatherman coffee mugs!
Wow!But best of all was the glass display cabinet showcasing all of Tim's early Mr. Crunch renditions. :o Pity none had price tags on them.
:DCheck out this beauty! The very first Leatherman PST 8)
They even had some retail store exclusives, like these dandy little Leatherman zippered clamshell cases. :) (the bin was heaped full when we arrived, and nearly empty by the time we left!) :D
All was not jovial at the store however. :-\ Whether it's one of your favorites or not, the final passing of a retired model is always a somber occasion. :'(
And unfortunately not everything we saw was available for sale!
Be that as it may, we still all left with much heavier arms, and much lighter wallets. ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




(my normally deviant mind must have gotten short-circuited from being in the holy presence of His Timness!)
:D