SOG Vulcan
-
Yes it is. And since we are talking about pocket clips, I should point out that the clip is the same design as most SOG folders in that it inserts into the butt of the knife for a deep carry which I like, but the nature of the design means that it's only secured by a single screw allowing the clip to rotate a bit and feel loose and flimsy. It's just something I've gotten used to in SOG knives so it doesn't bother me one bit. It's pretty thick so I'm not worried about it breaking, unlike the clip on the Flash II which blows, but it 'feels' flimsy since it moves around a bit.
-
I really liked the look and ergonomics of this knife but the price was just too high for what you get. ~100$ for VG-10 and FRN just isn't in line with a lot of the other companies, I plan on getting one but only after the price comes down or it hits the second hand market.
Good review though. :)
-
While I don't entirely disagree with that, and despite what I'm about to say I still think it may be a tad over priced. I''d say about $80 would make more sense. But on to my point: I've looked at other knives with VG-10 or different scale material that cost less, but they never really do it for me. I think the combination of THICK VG-10, decent Zytel (perhaps not the "best" material, but perfectly fine IMO) etc. in conjunction with a wicked strong lock, almost stupidly smooth opening, and awesome ergonomics, there really isn't much "direct" competition so to speak. I think it really is better than other knives using the same materials. It's one of those "more than the sum of it's parts" type deals. Again, I think in and of it's self it should be closer to the $80 mark (I paid about $90 BTW) but it is hard to find a better overall package using similar materials and features in any knife in a lower price point.
-
I closed the tab I was replying in
... I'll make this reply brief now...
The Ritter RSK Mk1 has G10 handles and a shorter, thinner blade http://tinyurl.com/ywyrsz but goes for $115. Without handling either I would go with the Vulcan for the stouter blade. I don't like the feel of Zytel though, I agree that for the money it's a good deal if you can find one <$100. -
Don't you hate it when you do that? Just makes you wanna say "screw the internet" lol.
I'm not really opposed to decent Zytel, as I do find it to be rather durable and can take some good abuse, not to mention it does afford decent grip. Not stellar, but good enough and certainly better that having aluminum or wooden scales. While I agree that it doesn't feel all to great and for comfort there are most certainly better choices, it's never really bothered me in any of my Zytel knives either. I've abused the Hell out of my Zytel Flash II and short of intentionally trying to break it, I can't even make a mark in the Zytel. I threw the Flash about 15 feet in the air, bouncing it off of an "I" beam then let it land on the concrete floor. It didn't even leave a mark. That's the hardest I ever tried, but it was enough to make me confident that it can hold up to about anything that may accidentally happen to it. It may not feel too great, but I'm willing to give up a bit for the knowledge that if need be my knife can take a pounding. Something important in an EDC where you don't know what you and it may wind up having to endure. -
Oh yeah, that Ritter says it has S30V not VG-10 BTW for the sake of honest comparison. Though from what I've heard about S30V's tendency to chip (don't know first hand, never had an S30 blade yet) I'm not so sure I'd prefer that. I do gotta say that even though it won't be for a while since I need to actually save some money instead of buying toys for once, my next purchase will likely be a BM Griptillian. Though not that Ritter version. Damn that's an expensive Griptillian.
-
Both S30V and VG10 are damn good steels and I'd take a knife made from either. I've heard that claim about chipping with the VG10, too. VG10 is supposedly easier to sharpen, while S30V holds an edge better. Now, is that a direct comparison with all things being equal?... I doubt it. Heat treatment plays a critical role. I have a Benchmade Activator 210 coming with S30V steel. I haven't received it yet. I doubt I could tell the difference between an S30V or a VG10 blade, and I doubt many others could, too.
-
Here's the wikis for S30V and VG10.
http://en.wikipedia.org/wiki/CPM_S30V_steel
http://en.wikipedia.org/wiki/VG-10
I think the steels you're thinking of are the Sandvik (13C26) steels seen on Kershaw folders and some others.
-
Hint, never use Wikipedia for anything! You can go on and edit whatever you want! In college they used to say if you use wikipedia then its not even like writing a paper!
-
It works in this case because I have already verified the information I wanted to present was correct through my own research.
:P
http://en.wikipedia.org/wiki/Image:Leatherman_Surge.jpg
;)
-
Wkipedia has it's uses as a quick reference. I usually use it just to help guide me in the right direction to do further research on my own. I agree, I doubt most people could find much difference between S30 and VG-10, and like I said I've never had anything S30V so I have no first hand experience. Oh and disregard my comment about the pocket clip. I snagged it on a matress today and it snapped clean off. SOG REALLY needs to work on their pocket clips. Although I like it better without the clip so whatever, I'll just toss it in a sheath since I hate diggin in my pockets for it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login