Questions: Modding a Compact Black
-
Just found this on German eBay (91mm):

Would this work?
-
-
Will work like a charm.
I have an old Camping knife i am tearing apart for the metal Saw/ file - If you want, you can have the Scissor layer for 1,- symbolic euro plus the stamp for a "Warensendung" - But you would have to wait until the weekend, I think.
-
You would ship from?
That old hiker would be perfekt because it also brings the phillips.
-
I'm mainly looking to create something like this:

-
@crackout said:
I'm mainly looking to create something like this:
That's interesting... I don't recognize that tool configuration; is it a production model, or a mod? I've never seen the inline phillips in the place of the can opener before. Cool idea! I think it'd be even better with a full thickness combo tool instead. Then, you could replace the small blade with a nail file.
I'm working on building myself a Yeoman out of a Compact and an old Explorer I've torn apart. I'm not going to use the old style scissors from the Explorer, so I suppose I could part with them and the spring if there was any interest. I'm sure the established modders here like Steve, Syph, and GigaHz would have them as parts too, and you could probably also get one from Rotokid.
-
This is a mockup from the toolfinder on the Victorinox page. ;)
-
Would it be possible to do the following:
Scale
Liner
Large Blade - Nail File
Liner
Scissors
Liner
Multipurpose-Caplifter - Inline Phillips
Liner
ScaleUsing the Compact as the base because of the pen and the multiuse caplifter.
-
I do ship from Germany, so the "Warensendung" would be 65 ct, i believe.
-
PM sent.
-
@crackout said:
Would it be possible to do the following:Scale
Liner
Large Blade - Nail File
Liner
Scissors
Liner
Multipurpose-Caplifter - Inline Phillips
Liner
ScaleUsing the Compact as the base because of the pen and the multiuse caplifter.
You should be able to do that config. Im not sure about the nail file on 91mm though? I tried to put it on the 93mm frame (the nail file from a cadet) and it doesnt work. You should be able to fit the new style philips (shorter) and a caplifter or combo tool in one layer no problem.
-
My idea was to use an Explorer to get the inline phillips, the small blade and the awl (and its backspring).
Remove the combo lifter from the blade layer in the compact, therefore add the small blade.
Then add a new layer with the combo lifter and the inline phillips on the front and the awl on the back.Possible? Geez, I'm the curious type.

-
Yep that should work no problem.

-
Alright, nice.
Ordered an Explorer and a Compact. Let's see what I can come up with.I guess I'll have to shim the multi cap lifter a bit because the phillips is thicker?
Thanks for the input!
-
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.
Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
-
@crackout said:
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
Yep you'll need to make some custom washers to shim it. I buy thin sheet in a few very thin thicknesses, then make the washers from those depending on how thin they need to be.
-
I tore the old Camping apart - shall i include the opener layer with the scissors?!
-
@crackout said:
Still waiting for my Explorer to arrive but I got thinking when I saw the combo tool on my Compact. Due to its use in the blade layer, it's a lot thinner than the actual caplifter.Anyone ever tried to exchange the standard lifter for the combo tool? I guess I could use the keyring spacer of the explorer to shim it?
You try and see if Rotokid has any of the combo tools from the 111 mm models. As far as I know they're identical in size to the ones on the 91 mm models, but they're the full thickness of the layer. They're hard to come by though, IIRC they only come in the Work Champ XL, Hunter, and Equestrian.
-
So I got the Explorer today and eventually took it apart. Before even laying hand on the Compact (it grew on me :D) I tried to combine the normal caplifter and the phillips.
The thing is that I'm not really sure what backspring to use. The phillips is thicker than the caplifter so I'm better of using its spring and shim the caplifter like Syph did here:
However, the caplifter doesn't seem to work with the phillips spring. Any ideas?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login