Bang for Your Buck
-
I agree with all said. I never had a badly made Sanrenmu. As for Buck folders, the best one for the money in my opinion is the Sodbuster.
The Rough Riders have the ocasional problem with different strength backsprings on the same knife. For instance the big blade having a weaker backspring than the small blade on multi layered knives.
I have 3 Tank007 flashlights, two 703s and one E07, for over two years now and have never had a problem with any of them. They do have short runtimes but at the power they put out, it's expected.
The Fenix e01 and Gerber IU are my favorite single mode flashligts too and I've been EDCing an itp a3 in SS for over a year now, great light.
I'd ad lighters here as well. The simple Bic (real Bic) and the Imco Triplex, Junior or Streamline.
Also pens, Parker Jotter, Zebra 701 and the Telescopic pen, Fisher Bullet.
-
For single bladed folders I'd add Opinel knives and also if you like the "tactical" side of things the OKC Rat 1 folder is hard to beat.
-
-
I'd add the Joker No 74 slipjoint in carbon steel. It's about the price of the cheaper Buck knives and it's an excellent knife, with solid lock up and wickedly sharp from the box. When it comes to Bucks themselves, I'd think the 371 Stockman offers excellent build quality for their (UK) price. Also believe the Gerber Tempo should be included in the list of torches.
-
Ah, I'd forgotten about the opinel as well.
I also didn't think about the fact that some of these won't be inexpensive outside the US, so if you have anything specific to your locale, please add.
Off to look up some of the things listed.
-
Because of this list I just had to check out Sanrenmu knives on Ebay... they are of course dirt cheap, and since I trust you guys when it comes to good and bad quality, I just had to buy two of them.

I blame you!
::)Do you guys now how the quality on theese are compared to Colt and Smith and Wesson knives? (I guess I will find out in a week or two...)
-
I have a couple of Sanrenmu knives and I can't believe how good they are for the money. Both the Rough Rider knives I've got are superb value as well. You really can't go wrong with Opinel's either. 8)
-
I also like the Cold Steel Kudu for value.
Case Sod Busters and eveb some GEC cheaper models can be considered good value.
For SRM try Exduct too.
SRM also makes many re-branded knives.Colt slipjoints are also made by the Rough Rider makers (some bucks too...).
For torches I also consider Tank007 (E09....), romisen and Xtar (cheap and good diving range) to be value for money. Trustfires have been good to me too..
-
On the side I've been buying and selling tac force spring assisted knives and I have to say they aren't the best ever but I've seen wayyyy worse. I buy them and resale for like 15-20 and they all open fast and the springs are pretty nice. Most are liner locks and at about 50%. They have some pretty neat styles also.
Sent from Ash forum mobile
-
Fixed Blades: Cold Steel Canadian Belt Knife, Finn Bear and Roach Belly, plus Mora and Hultafors. I still think you get a lot for your money with a CS Bushman and some of the John Nowill stuff too, though "finishing" may be required on the Nowills
Slippys: Rough Rider, SRM H02, Taylor Eye Witness, SAK's, Opinel, Douk Douk
Multitools: At UK prices it's hard to classify ... you just need to keep your eyes open for a bargain. At RRP they're all overpriced ::) Only real exception is the Bahco branded Bear clone with corkscrew that pops up at around £10 from time to time
Torches: Thrunight, Fenix
Lighters: Clipper
-
'peanut lighter' ! well worth a couple of quid, and always fun :D
-
yikes !
just thought about getting a few more, and they have gone up quite a bit !
is there something i don't know about ?
-

Ontario Rat-1: 3.5" AUS-8 blade, 4-way clip, and first rate design and assembly for $28 shipped.
- Kershaw Cryo, bottom (not spendy), with Spyderco Techno, top (yes spendy) .*
http://www.bladeforums.com/forums/showthread.php/977577-Kershaw-Cryo-v-Spyderco-Techno?highlight=techno
- Kershaw Cryo, bottom (not spendy), with Spyderco Techno, top (yes spendy) .*
-
I forgot the Byrd Tern too

-
I have to include the Kissing Crane Brown Mule, which is their Italian-made (or older, German-made) carbon steel Sodbuster pattern.
[Edit: Also, Gerber Shard, Artifact; CC pry widgies.]
-
@50ft-trad said:
I forgot the Byrd Tern too
I was really looking forward to this one since it was announced but still haven't gotten one. The fact I scored a like new UKPK two weeks before the Tern hit the shelves might have had something to do with it.
I'm sure though I'll end up with one eventually. I like the smaller size of it over the UKPK. I've had good experience with the Byrds, I have two Cara Caras, the old and the new design, my only big folders. 
-
@50ft-trad said:
I forgot the Byrd Tern too

I was really looking forward to this one since it was announced but still haven't gotten one. The fact I scored a like new UKPK two weeks before the Tern hit the shelves might have had something to do with it.
I'm sure though I'll end up with one eventually. I like the smaller size of it over the UKPK. I've had good experience with the Byrds, I have two Cara Caras, the old and the new design, my only big folders. 
I am a huge fan of the Tern, it's just the perfect OHO knife for me. Love the feel, love the size, love the full flat blade, love the materials and love the price. I well remember when the original UKPK came out and have managed to have a play with just about every version that has come along since and the Tern is still the one I would pick.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

