Multitool Maintenance: Pliers Lubrication
-
This is more of a general maintenance or new tool thing that I do through. Sure lots of us lubricate the parts & their joints, flex them back and forth, then wipe them down. Seems like basic stuff that we do and is heredity.
When it comes to the pliers it seems I may have a different method, and am sharing what I do.
Using my Leatherman Juice XE-6 as an example. I start at room temperature. Grab the bottle of Tri-Flow that has added Teflon to its original formula. Was back in the 1980's when fellow skateboarders recommended this with the added shots of even more Teflon. Works great on bicycle chains too!

Apply some oil around the pivoting metal in the center, horizontally, and just around the outer edge.

Next just have to work the plier arms back and forth, in a horizontal position to keep the oil pool up on top. After a few flexifications some metal (black) should start showing inside the oil pool.

Work the arms more, 5 to 10 minutes, while watching a movie or during commercials. More black metal should appear. This lets you know the friction points are being ground together and being pushed up into the liquid pool while the oil is replacing that area.

Works rather well, and you can rotate your pliers and see oil in the other parts as well. Wipe the tool down with an absorbent cotton rag then sheath or store it.Lubricate the joints when needed, knife blades, and all metal parts. Wipe them down afterwards.
-
Thanks for the tip,I like TriFlo, as a matter of fact I ran out and can only find it in a spray can
-
Nice technique

I shall try that when I am next motivated to do some tool pampering :D
-
Maybe its just me, but I never had a tool seize up on me from lack of lubrication. But if it ever happens, I suspect a shot of Jigaloo might work just as well.
-
Thanks for given me this tip. Next time If my any tool broken then I will try your tips.
-
@Xelkos said:
Wipe the tool down with an absorbent cotton rag then sheath or store it.If it is a leather sheath you may want to consider storing the knife or tool elsewhere as leather retains moisture and will encourage rust.

Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



