What Did You Use Your Multitool For Today?
-
@Lynn LeFey said:
I think Lynn did a direct comparison between the modern LM can opener and the Vic can opener.
Oh she did? Perhaps she will shed some light on this subject for me

Sure, here's the thread where it started (and pretty much ends)
</topic/36802
Then it branched into a separate thread to test 15oz cans (with some linked, timed videos)
</topic/37059
And THEN became a discussion on #10 cans here...
</topic/37113The TLDR short version... mostly not a lot of difference, times range from about 22 to 28 seconds on most can openers for 15oz cans. If you use big, #10 cans, either use a Vic (as opposed to a Wenger) or get a locking can opener.
And finally back on topic... I had one of those AWESOME days where you use a multitool to open packages of OTHER multitools! The blade on my Rambler did the work. Go Rambler!
Thanks Lynn
Oh and you gotta love those days

-
@Lynn LeFey said:
I think Lynn did a direct comparison between the modern LM can opener and the Vic can opener.
Oh she did? Perhaps she will shed some light on this subject for me

Sure, here's the thread where it started (and pretty much ends)
http://forum.multitool.or...ex.php/topic,36802.0.html
Then it branched into a separate thread to test 15oz cans (with some linked, timed videos)
http://forum.multitool.or...ex.php/topic,37059.0.html
And THEN became a discussion on #10 cans here...
http://forum.multitool.or...ex.php/topic,37113.0.htmlThe TLDR short version... mostly not a lot of difference, times range from about 22 to 28 seconds on most can openers for 15oz cans. If you use big, #10 cans, either use a Vic (as opposed to a Wenger) or get a locking can opener.
And finally back on topic... I had one of those AWESOME days where you use a multitool to open packages of OTHER multitools! The blade on my Rambler did the work. Go Rambler!
That's why I got my Charge, with the hook-knife early on, to open the packages of the later purchases.
-
Used my Wingman pliers to break up the ice on the bottom step of my bus. Not to technical but it worked.
-
over the last couple days the Spirit X has seen a lot more use. the phillips was used to swap some hard drives, the flathead for installing network cards into a couple ancient laser printers, phillips was used today to open up some barcode scanners and a mini pc looking for serial numbers, and the scissors got put work cutting some barcode labels.
-
Used my Victorinox Cadet Black Alox to
open tools on a husky mt
-
Used my Charge TTi to clean up and repair the leaking roof of the radome on a global communications/satellite tracking station while hanging off the side of a knuckle boom 30m up in the air.
-
I used my PST II to help in assembling a baby bouncer seat and crib. About 6 weeks left :ahhh
-
Used my Charge TTi to clean up and repair the leaking roof of the radome on a global communications/satellite tracking station while hanging off the side of a knuckle boom 30m up in the air.

I was trying not to fall to my early demise, rather than take pics, but i'll hunt up a pic of the radome for you.
-
Used my Surge to install 50 cable ties to hold some lattice work on some winged agility jumps. My dog club had a working bee today to maintain all our agility equipment.
Just to show I'm not a MT "toolist" I also used 15mm and 16mm ring spanners, round file, a hammer and my battery drill. I use the tool that works, whether it is an MT or not (but I did have to drive 30 minutes to get some of the non-MT tools, screws and bolts, whereas the Surge was with me and ready to go right from the start). Score for MTs

-
I'm definitely a toolie since I caught the bug again last fall, and it's usually a skinned knuckle or two that forces me to use a specialized tool instead. It's probably just a phase I'm going through...
-
it's not something you 'grow out off' ! sorry it might get worse and worse ! as you get older you have to give in to your urges :D
-
Used a kobalt 15-in-1 multi tool in the kitchen to open a can of peas.

-
Changed a light socket in a lamp the other day with my Victorinox Explorer. Alternated between the large flat head and phillips. Reminds me what a brilliant tool the inline phillips is on a SAK.

-
Used a kobalt mt to open a bottle of cream soda.

-
@Smaug said:
Changed a light socket in a lamp the other day with my Victorinox Explorer. Alternated between the large flat head and phillips. Reminds me what a brilliant tool the inline phillips is on a SAK.
Yeah, I like having the capability of switching between the flathead and phillips without having to change bits or anything like that.

-
Assembled my newly bought drill stand using the OHT, managed to use the removable bit driver to tighten some hex screws. The depth of the driver is deep enough to sit nicely on a jaw of the plier but with some side play, gripped with the other jaw it gets very stable and substantial force can be applied to tighten the screws.


-
Changed a light socket in a lamp the other day with my Victorinox Explorer. Alternated between the large flat head and phillips. Reminds me what a brilliant tool the inline phillips is on a SAK.
Yeah, I like having the capability of switching between the flathead and phillips without having to change bits or anything like that.

The explorer is probably my favorite SAK. Have mine on my belt right now in fact. The inline phillips makes this knife my go to for most things, the only thing missing is pliers.
-
Changed a light socket in a lamp the other day with my Victorinox Explorer. Alternated between the large flat head and phillips. Reminds me what a brilliant tool the inline phillips is on a SAK.
Yeah, I like having the capability of switching between the flathead and phillips without having to change bits or anything like that.

The explorer is probably my favorite SAK. Have mine on my belt right now in fact. The inline phillips makes this knife my go to for most things, the only thing missing is pliers.
It is one of my faves as well. That and the Compact are my favorites, and I'm looking to have them mated to create a Yeoman (my personal favorite) and Climber. Once I have the cash to spare, I will be making that happen (well I should say paying someone to make it happen ;))
Pliers and locking, heavier-use tools are why I carry a full size MT in my back pocket. I've been finding since I got into SAKs, that most of my uses are handled fine with a SAK. I still like to have a MT on me though in case I need/would rather use locking blades/tools and pliers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
- Mr. Whippy
