MT.O Challenge Coin
-
Bump :)
-
Lets forget about a coin, and do a multi dogtag :D
-
-
Tofty - if at some point there's a model that might benefit from being attempted in metal, let me know. If the model is posted on Shapeways (or similar) I can print out a copy and then try a sand-cast in pewter (for rough adjustments in draft/etc) and then Bronze.
Depending on the overall shape it may be cheaper overall to have a commercial foundry make a mold from a master model and then run a bunch. I believe (and don't hold me to it me here, I'm going on second hand info from another list I'm on..) that's something like $60 to make a mold for waxes, and around a $10/item charge in lots of 100+ pieces. Just for some random ballpark numbers.
-
Hi all,
Just to let you know i'm on holiday at the moment, in Tokyo of all places and have been a little distracted from this project.
not to worry though, on my return i'll be doing the drawings i said i would and showing off the first draft of the face graphics.Thanks snowbound, once i've finalised the design i'll get in touch.
There appear to be two standard ways of making coins: Casting and striking, and it depends on the pattern detail as to which is most appropriate. The design will probably end up as a relatively simple and bold design so hopefully casting, which i believe to be the cheaper option, will be the right option. -
Wonder when Tofty is back.
-
Wonder no more Raukodur.
I'm still not properly caught up on stuff so i'll do a proper update soon...ish.
Turns out i discovered a few things on my travels:
Firstly this coin has been done before.

At least this project has precedent now.
Secondly this project is now completely defunct as i've already found the best coin there will ever be.

I can't compete with that.
-

Good to see you back

-
@Mr. Whippy said:
Time for some more.........
firstly here are the renders of nuphoria's spannered coin and my coin being used with a 60mm bit holder.

I really like the right hand side coin. That is my favorite design so far. Just a coin, with a cool logo, that does one extra thing very well. :)
I second what Mr. Whippy said, ultimately it is a coin, looking like one, and it has one extra purpose (making it a multi-tool)
Also I like the design very, very much. I will buy it as it is. The one on the right.
-
<a href="http://radikal.ru/F/s019.radikal.ru/i638/1303/80/049aa06a6228.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://s019.radikal.ru/i638/1303/80/049aa06a6228t.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Tofty, when can we expect to see some 3d mockups of the latest design suggestions/modifications?
-
bump.
-
If i haven't done them by friday you can kick me.
-
Here's the nearly finished render of the coin.


A few small changes and additions needed but overall this is how i want the coin to look.
-
Google Translate autodetects "parati" as Italian, so we get: wallpaper pro opus
Machine translation and language detection is sometimes fun.

-
i'm sorry i've come late to the party, but i was just wondering if the size of this was going to be close to the size of a £ coin ? then it could be used in those horrid shopping trolly release things we have when you don't hve a coin ;)
-
@Raukodur said:
<a href="http://postimage.org/" target="_blank" rel="noopener noreferrer"><img src="http://s17.postimage.org/qrquc8g9b/MTO_coin_2a_page_1.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
upload picSo this is what I had in mind. You would retain the simple design and function of the hex driver, while allowing it to be easily attached to a keyring, and act as a keyring itself.
Tofty, you had mentioned you would do a 3d mockup of this? Or is there not any point if the design has now been finalised?
-
I like it :-)
But is it possible to add room for a split ring for those of us that want to attach it to a keychain without interfering with the middle hex cutout?Sent from my StoneTablet using Chiseltalk II
-
- 1 to that

(well said, I couldn't think how to say it clearly
)
- 1 to that
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
