Swisstool bit rachet
-
Bosch has a bit kit with a tiny ratchet (just because you cant buy the Vic ratchet alone, at least not here in Switzerland)
-
-
The Vic ratchet is a great little ratchet and can of course be used alone and makes a great companion with many things if you need the versatility of several driver types or a specialty bit. It's available separately here in the US.
The small size and stength of the design for it's size makes the vic ratchet really nice. Some other good options out there also such as the top peak and the Wera.
-
I like the look of that small Bosch set, never saw that one before.
-
@Etherealicer said:
Bosch has a bit kit with a tiny ratchet (just because you cant buy the Vic ratchet alone, at least not here in Switzerland)I have seen this and similar bit/ratchet kits branded for different, even higher end brand names, but the quality of the set i owned (I believe it was branded Karft Tools) was sub par on both teh ratchet and teh bits.
Maybe there is indeed a higher end version, but i doubt it - Check what you buy.
Wera, on the other hand, has me drooling over their bit ratchet for a while.... -
@ICanFixThat said:
The Vic ratchet is a great little ratchet and can of course be used alone and makes a great companion with many things if you need the versatility of several driver types or a specialty bit. It's available separately here in the US.That is so unfair! >:(
Bosch has a bit kit with a tiny ratchet (just because you cant buy the Vic ratchet alone, at least not here in Switzerland)
I have seen this and similar bit/ratchet kits branded for different, even higher end brand names, but the quality of the set i owned (I believe it was branded Karft Tools) was sub par on both teh ratchet and teh bits.
Maybe there is indeed a higher end version, but i doubt it - Check what you buy.
Wera, on the other hand, has me drooling over their bit ratchet for a while....Primarily suggested it because of the above.
-
@Etherealicer said:
(just because you cant buy the Vic ratchet alone, at least not here in Switzerland)You can on UK Amazon FWIW
@lowtech said:
Wera, on the other hand, has me drooling over their bit ratchet for a while....It is nice. Very nice. I have one.
I'd be interested to see how it compared to the Vic one.Edit: that Bosch one is really cheap! Like half the price of the Wera one cheap. I might have to get one of them, unlike my Wera set it has the sockets with it - I had to carry them around separately.
-
Wera, on the other hand, has me drooling over their bit ratchet for a while....
It is nice. Very nice. I have one.
I'd be interested to see how it compared to the Vic one.Yes i really like the Wera, i like most of their stuff. You can get the ratchet in one of their Bitcheck kits, i have that in my tool bag with their Vario, Kraftform, and precision drivers. I also have their 1/4" Zyklop ratchet, but i'v not used it enough to give a proper evaluation yet.
-
The vic ratchet it small... That's its real value i think. The design is also probably the best for this small size, it's very capable. If you need to edc a ratchet it's hard to beat.
-
I recently got a swisstool and wanted the versatility of having assorted bits like my LM Wave so here is what I did.
</post/769494>
I also have a Kobalt 35pc Right Angle Bit Driver 0338358 which I picked up some time ago for $10US at a box store. the dual ratcheting 1/4 X 5/16 box wrench is very small and the set has sockets and security torx bits as well.
the upside is the VIC set is compact but it also only has a few bits. the Kobalt plus the Craftsman and other bits still cost less than the VIC and I have quite a bit more versatility.
-
ICanFixThat: yes, I bought the Wera kit with all the screwdriver bits but no sockets - the Wera kit with sockets was £60 when I was looking and that's just silly money.
-
@Cupboard said:
ICanFixThat: yes, I bought the Wera kit with all the screwdriver bits but no sockets - the Wera kit with sockets was £60 when I was looking and that's just silly money.Yes, they are expensive to begin with and adding the sockets really pushed the price up. Luckily for me the Bitcheck case with sockets would not fit in in my tool bag where it needed to be so I didn't consider it. I did buy 4 common SAE sockets from them so I could have them handy and not break up my other sets in my larger tool boxes, and I have a very compact metric set in the tool bag from someone else I've had for 20+ years. I've been spending a lot of time taking stuff from my tool boxes and making my goto tool bag with the stuff I need the most and keeping it all very organized (using Veto Pro Pac Tech LC). I upgraded some tools in the process to make it just the way I wanted it. I've been very happy with it so far, but still a few things to do like string the wera SAE shockets on a wire through holders.
If any one is looking for a mini 1/4" hex bit and 1/4" square drive ratchet this one from Maxcraft is really neat. Handles both drives without an adapter. A real bargain I think; a great second set or one to leave in the car so you can keep the more expensive tools secure. Would be great in a bike kit, or in a pack with a number of bits.
-
@Aloha007 said:
I recently got a swisstool and wanted the versatility of having assorted bits like my LM Wave so here is what I did.</post/769494>
I also have a Kobalt 35pc Right Angle Bit Driver 0338358 which I picked up some time ago for $10US at a box store. the dual ratcheting 1/4 X 5/16 box wrench is very small and the set has sockets and security torx bits as well.
the upside is the VIC set is compact but it also only has a few bits. the Kobalt plus the Craftsman and other bits still cost less than the VIC and I have quite a bit more versatility.
Nice kit. Looks like you have things pretty well covered for a great price.
-
I commute by bike and work daily with computers (Apple, almost exclusively). So, my main uses for such tools would be around those two contexts. What would you recommend?
I know there are the Cybertools, but for me they're a bit expensive for an EDC bit set, as I already own two SAKs (Explorer Plus and Minichamp). For computers, I would use regularly a small Phillips (smaller than the one in the Minichamp) and maybe a small hex for those small HDD screws. For my bicycles, well, I really need to investigate and do a list with the required bits. Has anyone here experimented that recent victorinox bit rachet for bikers?
-
I can't give you a recommendation on a specific set up, but you can investigate the different ratchets and kits mention in this thread. I have not played with the new Vic Bike-Kit ratchet, but it looks like it's made by PB Swiss Tools so I expect it is excellnt quality. The original ST+ one is the smallest you'll find likely and carries very easy in a belt pouch. The holder has room for some extra bits you might need.
Computers are one thing that can use more precision and less torque capacity and for a bike I like to have something more heavy duty. The Cybertool is very good for computers if you can get the bits you need, but the street price has really increased. When you can't get the bit you need I find it very frustrating. It would probably not be very useful for your bike except for the very small stuff.
That MaxCraft ratchet is very tough. The Wera might be too expensive for you, but I think one of them with their BitCheck kit is really flexible, you can substitite the bits as your needs dictate. It would work well for most stuff, probably even for the Bike repairs you might need it for.
Also check out the Top Peak ratchet/bike-kits. Very similar to the latest Vic one.
Working on Mac stuff would you not need a few precision drivers/bits for Pentalope drive? You may also want to use JIS bits rather than standard Phillips when you see a cross drive screw, they're probably not Phillips on those. If you see a little divet on the screw head they definetly are JIS, but even if they don't have it I suspect they are. Phillips might work in some cases but the smaller the screw the worse the fir will be I think. If you end up with some precision 4mm bits, Wiha makes a nice 1/4" to 4mm adapter.
-
thank you Icanfixthat, In our ever evolving setup this is what I have as of now and it is working. I like the topeak set very much as well as the Vic ratchet it was just a matter of cost and I ended up with 2 totally independent setups, plus I can utilize the LM bits as well. those wera tool sets sure are lovely and look to be quite engineered. good luck victordomingos on getting squared away.
-
Thank you all. I will take a look at the options and think about it :-)
-
@victordomingos said:
Thank you all. I will take a look at the options and think about it :-)if you have a harborfrieght in your neck of the woods they have inexpensive yet not the highest quality tools that very well could suffice for your computer needs. check thru the search function as there are several cyclist here and could steer you in the right direction tool wise. I got a set of precision screwdrivers a ways back that sound like just what you are looking for. again not top quality gear like the wera and Vic but YMMV as usual. again best to you.
-
@ICanFixThat said:
[quote author=Cupboard link=topic=47100.msg771532#msg771532 date=1378489468]
Yes, they are expensive to begin with and adding the sockets really pushed the price up. Luckily for me the Bitcheck case with sockets would not fit in in my tool bag where it needed to be so I didn't consider it.I did exactly the same - the Bit Check kit without the sockets was about £30 for a large selection of decent bits and a ratchet which didn't seem too bad. Coupled with a cheap 1/4" socket set and I was away.
That went in a little pouch with a few other bits and bobs (fake Crunch, electrical tape, self amalgamating tape, little driver, etc) and was a useful grab bag for "Tom the x has broken" scenarios
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
