SAK's - Corkscrew or Phillips?
-
Of course the phillips, but only the old one with nailfile. ;-)
-
Tinker for me,the CS is handy for holding the micro screwdriver but never actually use the CS,the tinker is my favourite lightweight sak options
nice resurrection 
-
Corkscrew all the way

The CS opens wine bottles, untangles knots, and holds the little precision driver, and you can tackle many of the screws the Phillips can handle with the can opener
-
Phillips!
Never used the CS for a cork,and Havnt even found the use for the micro driver on those SAKs I carry that do have a CS
-
The Phillips is more useful than the corkscrew.
-
I'd say Phillips but you can't really crack down on the back tools
-
I would have to go with the corkscrew, even though I never need it for wine bottles, and all it really does is hold the mini driver. However, it is potentially more useful in misc ways in comparison to the phillips. Plus, the phillips isn't easy to use as a back spring tool. It's hard to get into tighter spaces and turning it can be clumsy at times. The inline is much better :D
-
Neither! Viva alox 93s!
In my opinion the only backtool on a 91 that makes sense is the awl. But thats inline on an alox.. so.. I dont have much use for T handled tools. I know some people actually use the corkscrew, but Ive never had a need.
If anyone has phillips backside tools they wish were corkscrews, Id happily mod those for free. :D I have about 10 million corkscrews, but much prefer having the phillips for mods.
-
I like the in-line Phillips and I like my Cybertool, but I don't like the back layer Phillips so I'd rather have the corkscrew with micro screwdriver.
-
Corkscrew... for el vino collapso. MOAR BOOZAHOL!!!
-
@Syph007 said:
Neither! Viva alox 93s!In my opinion the only backtool on a 91 that makes sense is the awl. But thats inline on an alox.. so.. I dont have much use for T handled tools. I know some people actually use the corkscrew, but Ive never had a need.
If anyone has phillips backside tools they wish were corkscrews, Id happily mod those for free. :D I have about 10 million corkscrews, but much prefer having the phillips for mods.
The only reason I started EDCing ALOX models was cause I made myself a Twistick out of spare SAK parts. :D Maybe recycle them and give them as freebies to frequent customers or extra for a few bucks. And my/Neil's design doesn't even require you to take it of the keyring unlike the original. :P
-
Enki might have given you a great suggestion there.
-
Neither! Viva alox 93s!
In my opinion the only backtool on a 91 that makes sense is the awl. But thats inline on an alox.. so.. I dont have much use for T handled tools. I know some people actually use the corkscrew, but Ive never had a need.
If anyone has phillips backside tools they wish were corkscrews, Id happily mod those for free. :D I have about 10 million corkscrews, but much prefer having the phillips for mods.
The only reason I started EDCing ALOX models was cause I made myself a Twistick out of spare SAK parts. :D Maybe recycle them and give them as freebies to frequent customers or extra for a few bucks. And my/Neil's design doesn't even require you to take it of the keyring unlike the original. :P
Yes for sure that is a clever use of parts! I never made one for myself since I dont need it, but Im sure others could use one. Maybe I'll toss in some parts in the next BO run for BO twisticks for something different. 10 million might be a slight over exaggeration :D , but for sure over 100 in brand new condition.
If you use a large split ring for keys, would just putting the corkscrew right on the split ring work for opening wine, or would that not give enough leverage?
-
I think you would stretch out the splitring but I'll try it come weekend. ;)
-
@Syph007 said:
If you use a large split ring for keys, would just putting the corkscrew right on the split ring work for opening wine, or would that not give enough leverage?Twist it into the cork is easy, but I don't think anyone can pull the cork out with just a split ring short of those "my arm is bigger than your leg" guys.
-
I don't know anymore.
-
I don't believe it.
Having placed my vote fairly and squarely in the corkscrew camp - I have just been caught out.
Was at work yesterday and a cupboard door had come off and needed fixing.
Had my current most popular EDC - Wenger Traveller with me- So no Phillips backspring and also no Viccy can opener with flat Phillips either.
I tried the tip of the nail file - Which I see Wenger claim is a Phillips - But it was not up to the job with the large screws - Not even close
Wenger could make that file tip a much more efective Phillips by making the tip slightly less pointy - In fact like their regular flat Phillips - But that is probably a moot point now - :(
Hmm - Might have to rethink Phillips backspring allegiance and/or EDC!!
I don't like coming across every day tool challenges/jobs that my SAK cannot fix!! - So no Phillips backspring and also no Viccy can opener with flat Phillips either.
-
@Huntsman said:
Hmm - Might have to rethink Phillips backspring allegiance and/or EDC!!
I don't like coming across every day tool challenges/jobs that my SAK cannot fix!!Owning and having carried both, it is my belief that the Vic analogue to the Wenger Traveler, the Climber, is a superior option. The only feature I sometimes miss from the Traveler is the nail file. Traveler vs. Climber...perhaps an idea for another thread, if it hasn't already been done.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

