What was your first MT?
-
Gerber MP600 variant. No locks, but revised handles, only slightly pinchy.
-
A victorinox sportsman when I was 8. I lost it probably two years later and bought a LM PST clone for a mere $5. I then, realizing that sucked, bought a gerber suspension. After hating the philips and knife blade on that I got a wingman. After it was stolen things escalated quickly.
-
I started off with a £1-£2 PST clone from Woolworths which was terrible.
A couple of years later I bought a Kick because it was the smallest full sized Leatherman. That was good but I wanted the OHO blades and locks of the Wave, so after having the Kick for a couple of years sold it just before Christmas and asked for Christmas money to add to the funds from the Kick to buy a Wave. My grandparents then surprised me by getting me a Wave outright, and that (modified) is now what I carry pretty much every day.
It's getting a bit tired now, I had to swap the blades round because the plain edged one had developed a lot of up and down blade play. Now the serrated one does but that doesn't worry me so much because I very rarely use it. At some point in the next year or two that will have to get retired and replaced with a new one.
I wish I still had the Kick, it was good, compact and legal.
-
First branded MT was a Gerber Suspension
Decided it was horrendous even though I knew nothing about multitools at that time, so I did my research and got a Swisstool CS Plus. Much happier :D It took a long time before I decided to trust Gerber again, though I am now very glad I did and have several models I'm happy withFirst Leatherman was the Juice CS4 - **very **disappointed! Next was a Squirt P4 which was also had quality problems. In fact it took till I got my third Leatherman (a Wave) before I felt happy. It's been very hit and miss with Leatherman ever since, and it's fair to say they've never really won me over :-\
First SAK was a Tourist which in time made me regret not getting a scissors model, so I followed that with a Deluxe Tinker which in time made me regret getting the backspring Philips. Almost all the SAKs I've had since then have had scissors and corkscrew :D
Took a while to get into Wenger, but now the Traveller is my favourite model :) -
My first was the LM Blast in March of 2012. Yeah, I was a late bloomer with the MTs/SAKs

-
Style CS

-
SOG Crosscut, in maybe '95 or '96.
I owned a buck slipjoint folder all the way back to maybe '85 or so, and lost that, but not a real MT, and didn't own a SAK until JerseyDevil kindly sent me a Tinker a year or so back.
-
My first was a Vic Spartan in about 1996.
-
First SAK was a Wenger ToolChest (of some variation) that I got when I was about 13. I still have that one. had several lower quality generic pocket/pen knives before that.
First MT was a LM Supertool which I gifted to my brother when I got my Wave (old model).
He still carries the Supertool in his hydration pack when we go dirtbike riding and it gets used often enough. Nice to see it didn't take up permanent residence in his sock drawer.
-
Victorinox Economy Recruit in the late 80s.
- Large and small blades
- Bottle and can openers
- Large and small flat screwdrivers, and of course the small fits in a #2 Phillips fairly well
No lanyard ring, toothpick and tweezers, or back tools. No back tools = a nice smooth back, very comfortable in the hand. My grandpa brought it back from Switzerland from me, along with 5 others just like it for my brother and cousins. Would you believe, I've hardly used this at all? I considered it so nice at the time, that I wanted to "save" it. I used a junky, rust old Imperial jack knife instead. By the time I finally got enough nerve to start using it seriously, an uncle gave me a Small Tinker, which I used instead, and kept this little guy in great condition. (except for the crappy "Economy" shield, whose paint rubbed off in my pocket)
<a href="http://s134.photobucket.com/user/jzorns/media/Knives/Rare_Vic3.jpg.html" target="_blank" rel="noopener noreferrer"><img src="http://i134.photobucket.com/albums/q112/jzorns/Knives/Rare_Vic3.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
First SAK: a Victorinox mechanic in the early 80s.
First pliers MT: original Leatherman Wave in 90s
-
@50ft-trad said:
First branded MT was a Gerber Suspension
Decided it was horrendous even though I knew nothing about multitools at that time, so I did my research and got a Swisstool CS Plus. Much happier :D It took a long time before I decided to trust Gerber again, though I am now very glad I did and have several models I'm happy withFirst Leatherman was the Juice CS4 - **very **disappointed! Next was a Squirt P4 which was also had quality problems. In fact it took till I got my third Leatherman (a Wave) before I felt happy. It's been very hit and miss with Leatherman ever since, and it's fair to say they've never really won me over :-\
First SAK was a Tourist which in time made me regret not getting a scissors model, so I followed that with a Deluxe Tinker which in time made me regret getting the backspring Philips. Almost all the SAKs I've had since then have had scissors and corkscrew :D
Took a while to get into Wenger, but now the Traveller is my favourite model :)Another thread made me realise that actually I might have had my Swiss+Tech Utilikey before any of these, and it's still attached to my keys today
-
Ah, we're counting SAKs too. Then a Wenger Commander Snife Waves when I was 12 I think. And lots of small slippies and knock off SAKs before that.
-
My first MT was a Gerber 400...as a 17 yr old, it was awesome.
-
PST etched with Boeing on one of the handles given to me by my father about a year or two ago. The collection now stands at 19 multi's! ;p
-
I guess my first ones must have been cheapo flea-market SAK knockoffs, several of them, back when I was around 8-10 years old. My first decent one was a LM Super Tool, back around 1998. Count now stands at 57 decent ones and a drawer full of junk.
-
First real MT I ever bought was a Leatherman Wave.
-
My dad bought identical cheapo SAKs for my sister and me when we were on holiday in Snowdonia. I think I was about 8 years old at the time so he blunted the knife blade on a stone before he gave it to me. It had brown handles and as well as the knife it had a fork and spoon! That one is lost to the mists of time but I'm hoping it will turn up one day.
It was probably about ten years later that I bought my first proper SAK which was a Vic Climber with black scales. I lost that to the security people when I took the boat tour to the Statue of Liberty and Ellis Island. :'( Still, I suppose if they hadn't taken it, I wouldn't have had to look for a replacement... ;)
My first pliers type multitool was the new Wave. It's still probably the one I would keep if I could only have one. I use diamond file all the time and none of my other MTs have one. Sorry, Spirit!
-
My first was a sak in the seventies. Kind of grow up with them as they were common.
Had some and lost some during younger age. Now I only have three left and more careful about them.
One is from late eighties and the other two must be from the nineties. Don´t remember which ones or their names.
My first "new style" mt was Mr pinchy. -
Mine was a Champion Plus, that I got from my grandfather for my 12th birthday, I bought my older son the same thing for his 12th bday, I'll have to buy another in three years for my other son, but I still have mine, don't use it, it just is for memories, it sat in the woods for just over a year some 20yrs ago cause I lost it, but I cleaned it up and it was like new. The one thing I wanted was a sheath with a steel because that's what my grandfather had, so when he passed I got his, but no steel so I bought a new one for it, I also got his sak, in which was used for a part for a custom made sak, so no matter what there's a part of him with me. JR
The one on the right is my first, with my grandfathers sheath, and the one on the left is my custom with one part from his sak,

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


