Gerber Dime retirement
-
You should try an MP600 from Gerber before you give them the boot.
-
I haven't had any failures as bad as Jors, but it does feel like the steel used in the Dime (and the Splice, and the Vise, and the Octane, and the Crucial) is thinner and flimsier than it ought to be. :-\
-
I agree Bob. They definitely don't stand up like other such tools from other manufacturers.
-
They are also half the price of the Squirt line as well.;) Keep in mind that, while I am a Gerber fan, I do prefer the Squirts myself, I just want to acknowledge that they've likely had to make some compromises to keep that price point down.
I still think the Dime is a decent tool for what you pay for it, but I also think there are better offerings from Gerber as well, the MP600 and MP400 being my top choices.
-
I wish the Dime would stop being produced.

-
Go with a squirt! LM P4 has been on my keychain for years now and still going strong.
-
@Chako said:
You should try an MP600 from Gerber before you give them the boot.+1 I was ready to completely ignore Gerber after I broke a Suspension while playing with it in a store. But I got an MP450 in a trade here, then a 600, then another 600, and a 400, and a Strata, and an Octane, and a..... ;) Give an MP a shot before disregarding Gerber completely. They are excellent tools that have quite a following for a reason.
-
I had the same problem. Here's a link to my thread on 'Bad wire cutters on Dime?'
http://forum.multitool.org/gerber-tools/bad-wire-cutters-on-dime/There's also a partial solution in that thread. Maybe give it a read and see if the fix helps.
Otherwise, I completely agree with you. The wire cutters, as they come out of the box, are pretty terrible.
-
I was starting to think that the Dime was good competitor to LM's Squirts but after I watched a video of the pliers, more specifically the cutters, failing so bad I changed my mind very quickly.
I really wish, from the deepest corners of my ribosomes, that Gerber could address this issues. There is something about it that really makes me want one, but a better and improved one.
-
I wanted to consider the Dime a failure after the cutter issue, but honestly, fixing it is only an annoyance. Once fixed, they're still not as good as a Squirt, but are miles better than the dinky cutter on the pliers of a 91mm Victorinox, and I don't hear people screaming over how pathetic those cutters are. The Vic's will never cut 12-gauge wire. The Dime's will, if maybe not able to handle it long-term. For all I know, maybe even the Squirt would fail long-term from the strain of cutting 12-gauge wire, although it feels a lot more solid than the Dime doing it.
And I wouldn't trust ANY of them to cut coathanger, or a nail, so you just have to draw the line somewhere for any tool, and know it's limitations.
The weak wire cutters are nowhere near a deal-breaker for me with the Dime, but do drop it below the Squirt in one area of functionality.
-
SolomonKane79
[/quote]
+1!
or maybe even a Freehand, for if i remember well Jors likes the beefy sized tools, i remember his reviews of the larger LMs! 
[/quote]You remember right. I like the great ones. Currently I am liking the Recharge. I purchased the Charge TTi and added the rebar pliers head to it. Awesome tool. I aqm not carrying it 24/7 currently, but in my backpack. I am currently handicapped after a series of surgery operations on my legs. Another reason is that I first check out regarding our new dangerous weapons act. As a Police officer that will probably never a problem as our new act even make provision for carrying a knife.item to protect yourself, which is a legal act.
I am very disappointed and will see if maybe I can mod the pliers to have no side play on my mini milling machine. There is a big play in the pliers and as the problem link showed, mine is also completely blunt. Maybe if I can flare the axle a bit to tighten it up I will give it a second chance. Or maybe I will consider another small size tool. However the squirt did not disappoint me.
The scissors also disappointed me as it is cutting the wrong way around. It is a left handed scissors.
-
SolomonKane79, I have given it some thought. I am working on some cure in my head. I have an idea on how to rectify the Pliers.
I just need a proper pliers or I have to add an awl in it's place.
I will take photographs and post if successful.
-
The Dime is a MT I really wanted to like, but part of the backspring broke (the one on the package opener, though it still worked... just opened way too far) almost immediately after I got the thing, and it didn't take long for the spring on the scissors to break off too. I never had much issue with the pliers but I also didn't use them for much other than some adjustments on health care equipment.
If the Dime were tougher, it'd be the perfect keychain tool for me. As it is, the Gerber I like is the Pro Scout.
Dem
-
@Dem said:
The Dime is a MT I really wanted to like, but part of the backspring brokeThe scissor spring broke on Mrs. Powernoodle's PS4 after almost no usage, so I don't think that any of these micro MTs are really built to last. In my view, the PS4 and Dime are both more akin to last ditch, very light use, pocket convenience items - especially the cutters and the pliers. But really the whole tool. Good for snipping a loose thread, pulling a vehicle circuit breaker or opening a box, but that's about it. I still carry a PS4 on a daily basis (for the pliers, mainly), but I have pretty low expectations for any MT that weighs 2 ounces. The Dime's cutters are almost useless (unless you sharpen them up like Lynn did), and the springs on both of these tools almost commit suicide for no reason. But alas, I can't stop carrying the dang thing.
-
@powernoodle said:
**The scissor spring broke on Mrs. Powernoodle's PS4 after almost no usage, **I think at least a dozen of us here had the same problem. ::)
-
**The scissor spring broke on Mrs. Powernoodle's PS4 after almost no usage, **
I think at least a dozen of us here had the same problem. ::)
And this is why I don't use the Dime...
-
I returned the PS4 when I bought it. It is nowhere as tough as the previous generation. The P4, S4 were much more durable, in my experience anyway. Still have a P4 on my keys going strong after 3 yrs now.
-
**The scissor spring broke on Mrs. Powernoodle's PS4 after almost no usage, **
I think at least a dozen of us here had the same problem. ::)
And this is why I don't use the Dime...
You don't use the Gerber Dime cause the scissors spring on the Leatherman Squirt PS4 breaks easily?

Where's the logic in that? :P
-
**The scissor spring broke on Mrs. Powernoodle's PS4 after almost no usage, **
I think at least a dozen of us here had the same problem. ::)
And this is why I don't use the Dime...
You don't use the Gerber Dime cause the scissors spring on the Leatherman Squirt PS4 breaks easily?

Where's the logic in that? :P
Shoot, I read "Mrs. Powernoodle's Dime" instead of "Mrs. Powernoodle's PS4".

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login