Need advice on starter multi tool
-
I would expect the LM to be better quality
For salt water use, how about a swisstool with the serrated and standard blade? EDIT:used only in your price range
The Ganzo seems expensive; try Exduct too for Ganzos
-
The sidekick is a good mt for the price and would have the tools you need,or try and pick up a wave on the cheap

-
Im weary about the LM rusting. Would fresh water rust it??
-
If you store it wet, yes.
I doubt it would be any worse than the Ganzo though.Out of those two I'd definitely get the Leatherman, it's a decent MT. Obviously not as good as ones twice the price but I don't think it's half as good IYSWIM. You shouldn't have rust issues if you give it half an ounce of care every now and then.
I don't live in a particularly bad area for rust (I don't think) and I regularly get my Leatherman MTs wet. I usually dry them out afterwards but haven't had any rust issues.
-
Honestly if you look at a LM Sidekick wrong it will rust. :D
I would try and pick up a LM Wave or Blast if you can find one. Used would probably be in your price range. Obviously if you use any MT in a salt water situation you will want to rinse it with freshwater and dry afterwards. When using a MT around fresh water you wont need to worry to much but I would still rinse and dry after freshwater use. Not a must, but any water fresh or salt left on a tool will rust it as well as the sweat from your hands during use. If the decision is between the two tools you listed I would get the Sidekick and just be vigilant about keeping an eye on the tool. If you start to see rust take care of it before it does any damage. Hope this could help.
-
Every time I write Salt Water in a single word it makes it salsmurfer.

-
I say Gerber Flik! I carried it a lot around salt water and only got minor surface rust spots. It is in your price range on ebay, but i don't know if you have import duties. It has a good plain blade and a GREAT serrated blade, excellent scissors and a saw, plus other tiny tools. If i recall it right they even made a "fishing" variant with extra long needlenose...

The Blast is a great tool for the price, but it only has a plain blade!
-
A blunt nose mp600 can be had for under $50. A diesel for under 50, BO diesel for $52. Seems to have everything you're looking for.
-
@MountainKing said:
Im weary about the LM rusting. Would fresh water rust it??It seems even looking at some of them makes them rust!! :D
I'd recommend waiting and trying to find a good used SwissTool. I bought mine in pretty much mint condition for right around what your budget is. Just remember, good things come to those who wait.
-
dont worry to much about leatherman. just clean and oil it every once in a while. just like most tools.
-
The Buck X-Tract is a pretty good fishing tool, the pliers are definitely not the best out there but their lower profile is pretty good for helping with hook removal. The original has a combo edged knife with a can/bottle opener but they also made a FIN version directed more towards fishing with a plain edge, scissors, and a hook sharpener. Mine has done very well with rust resistance so far including one miserable trip stuck on an island in the rain for just about 24 hours straight.
-
You can probably get a Leatherman Rebar for under $50, and it is a lot better than a Sidekick.

-
I would just like to point out that the only Leatherman I've ever had problems with rust on was my first Rebar which was second hand bought from someone that worked on a dock. That was only very minor.
My Spirit, on the other hand, has a little bit on the Phillips driver and on the blade nail nick. Nothing major, but it's there.
@CanadianLMfan said:
You can probably get a Leatherman Rebar for under $50, and it is a lot better than a Sidekick.
It is and it isn't... It doesn't have a OHO blade and it doesn't have spring loaded pliers. It may also not be possible to get it for $50 in Mauritius.
-
I think he would be able to find a Gerber in his price range. A Gerber Flik Fish might be a good one for you too.
SolomonKane already beat me to that suggestion.
Sent from my iPad using Tapatalk
-
The only things I think I can add here are: if your even half way serious about a Multi tool,don't bother with a Ganzo. I have one,bought for fun,and yeh...just don't bother. I'm no fan of the Sidekick or the Wingman,but the beat the living daylights out of a Ganzo.
Just to upset cLMf , Gerber MP400s,Crucials and Octanes can be had for decent prices,the 400 being the pick of the bunch
-
I don't have a sidekick, but I do have a Ganzo 301b.
I'd buy a gerber suspension first, if you like the Ganzo. Chances are the warranty will be much easier to work with if you need to, and they're very similar tools. Perhaps more importantly, the Ganzo doesn't have a built in phillips driver, you have to use the bit kit it comes with for that (a real shame, as the Ganzo 301 is otherwise probably the nicest of the Chinese MTs.)
Dem
-
I bought a Spirit just last week for $35 + shipping. There are deals to be had. Just have to pay attention. ;)
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

