Most Frustrating MT
-
Given my limited experience with multitools, I don't think you can get any less bang for your buck than with a SOG PowerLock. I base this opinion not only on snapping plier heads, but how they neglected to utilize the space inside the handle for bigger tools. Not that I particularly damn all chisel ground blades but they could have done better than that. Also the nail holes (not nicks) in the tools greatly weakens them.
-
Hmmmm....

Most Juices. I could forgive most of the first generation Juices shortcomings if only they could make them with arms the same thickness.
The Rebar. Please make one with a tool load relevant to people like me? Scissors,a bit driver...
SOG. Please make better scissors and Phillips for the PPP and Paratool
Victorinox. Please look at what Syph007 is doing with Alox,re inline Phillips and scissor

-
I've not handled many, but the Skeletool has really disappointed me. It promised so much but compared with my new Rebar or even my old Kick fails to deliver. Hard to clean, uncomfortable to hold, crappy wire cutters and heavy for the number of tools you get. It does look cool though, and the pocket clip and bit driver are good.
-
For what I had personally experienced , have to be the SOG
@Kampfer said:
Yes, if I was into collecting i would definitely keep it.
Also I don't necessary call it a "big" tool, for me, it is a tool with "long" pliers and "long" handles.
It is pretty light for a tool this size, thanks to all the empty space in it.One more thing, the kinfe blade is nice, but it keep hitting the lock mechanism when it closes, causing flat spots on the blade, unforgivable design flaw.
@Kampfer said:
I could not resist, bought one, hated it, returned it in less than 24 hrs.
Fit and finish is first class, but the design is
Nothing against Blacktip, just to SOG's powerassist system.Overly complex mechanisms!
It is simple to design something complex, but...
It's Really Complex To Make Something Simple. -
@Kampfer said:
For what I had personally experienced , have to be the SOGYes, if I was into collecting i would definitely keep it.
Also I don't necessary call it a "big" tool, for me, it is a tool with "long" pliers and "long" handles.
It is pretty light for a tool this size, thanks to all the empty space in it.One more thing, the kinfe blade is nice, but it keep hitting the lock mechanism when it closes, causing flat spots on the blade, unforgivable design flaw.
@Kampfer said:
I could not resist, bought one, hated it, returned it in less than 24 hrs.
Fit and finish is first class, but the design is
Nothing against Blacktip, just to SOG's powerassist system.Overly complex mechanisms!
It is simple to design something complex, but...
It's Really Complex To Make Something Simple.I'd forgotten about the PA, a fairly large tool for what little it offers.
-
Juice (Pro). A very promising design that's not cheap, but every single tool is clearly inferior to the equivalent Victorinox tool (plier head is the only exception, but that too is inferior to Spirit's plier head that's more pocketable) making me leaving it behind.
I have to agree
I own several juices, I love the fiddle factor concept, but the poor design is its major weakness. Its neither a useful keyring tool nor a practical full size tool and as you rightly say, it more or less fails on every level.
The Spirit wins hands down. Its been said many many times before but why oh why won't victorinox release a juice sized spirit!!
I would actually edc that!!I too do agree Juice is pretty frustrating, it is a nice size of tool and has a lot of potential. But when handling it in hand, it felt like it is bad attempt to make a SAK with large pliers. It doesn't offer the compact/tool density as a SAK, and yet it left me desirable for a larger size pliers-based tool.
-
Swisstool and Spirit - no pocket clips , no OHO .
Chris
-
Gerber Radius. >:D
-
Most Juices. I could forgive most of the first generation Juices shortcomings if only they could make them with arms the same thickness.
The Rebar. Please make one with a tool load relevant to people like me? Scissors,a bit driver...
SOG. Please make better scissors and Phillips for the PPP and Paratool
Victorinox. Please look at what Syph007 is doing with Alox,re inline Phillips and scissor

on all countsI'll add:
- All MTs without outside-opening implements
- All MTs without locking implements, especially those additionally sporting locking knife blades
- All MTs with clamping implements
- Anything without decent scissors and pliers and a real phillips head
-
I agree with many of the nominations so far, but the brand that has really disappointed me the most in recent years has been Gerber. Other than the 400-series and 600-series tools, every single model they have brought out lately has been rubbish, due primarily to flimsy construction and poor build quality. Model names include Shortcut, Clutch, Suspension, Crucial, Splice, Vise, Octane, Strata, Grappler, Balance, Bullrush and probably others that I can't think of at the moment. Most have design features that seem promising when the first introductory photos are released, but then are a big let down when actually held for the first time. :-\
-
@J-sews said:
I agree with many of the nominations so far, but the brand that has really disappointed me the most in recent years has been Gerber. Other than the 400-series and 600-series tools, every single model they have brought out lately has been rubbish, due primarily to flimsy construction and poor build quality. Model names include Shortcut, Clutch, Suspension, Crucial, Splice, Vise, Octane, Strata, Grappler, Balance, Bullrush and probably others that I can't think of at the moment. Most have design features that seem promising when the first introductory photos are released, but then are a big let down when actually held for the first time. :-\Including the MP1?
-
I'm going to add another: my BO LM mini. Nothing much wrong with it,but I can't figure out where I left it!
-
I agree with many of the nominations so far, but the brand that has really disappointed me the most in recent years has been Gerber. Other than the 400-series and 600-series tools, every single model they have brought out lately has been rubbish, due primarily to flimsy construction and poor build quality. Model names include Shortcut, Clutch, Suspension, Crucial, Splice, Vise, Octane, Strata, Grappler, Balance, Bullrush and probably others that I can't think of at the moment. Most have design features that seem promising when the first introductory photos are released, but then are a big let down when actually held for the first time. :-\
Including the MP1?
Funnily enough, I'm actually quite taken with the MP1 - the awl is a beast.
-
@J-sews said:
I agree with many of the nominations so far, but the brand that has really disappointed me the most in recent years has been Gerber. Other than the 400-series and 600-series tools, every single model they have brought out lately has been rubbish, due primarily to flimsy construction and poor build quality. Model names include Shortcut, Clutch, Suspension, Crucial, Splice, Vise, Octane, Strata, Grappler, Balance, Bullrush and probably others that I can't think of at the moment. Most have design features that seem promising when the first introductory photos are released, but then are a big let down when actually held for the first time. :-\this.
back in the late 80s rly 90s erber was the name in blades....not so much anymore ( sadness)
-
Most Frustrating MT - The one you've ordered from overseas and it's been taking it weeks to arrive :ahhh
-
Most Frustrating MT - The one you've ordered from overseas and it's been taking it weeks to arrive :ahhh
Yeah those mt's annoy me too :ahhh.
Mine was the sog PPP and powerlock,great pliers but crap tools :-\ shame as lots of potential.
I would tend to agree with this. I hate how the gears jam into the palm of your hand while using them as well. You would think they would of noticed something like that and fixed it accordingly.

-
@captain spaulding said:
I hate how the gears jam into the palm of your hand while using them as well. You would think they would of noticed something like that and fixed it accordingly.
Ummm, They have and they did (except for the Pocket PowerPliers where you have to buy the Paladin Powerplay PT-510 version to get the gear guards/covers you are looking for ;)

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


