Survival kit minimum size blade?
-
I think a flat 93mm Pioneer/Soldier will fit in an Altoids tin as well. The ALOX SAKs are great survival tools and they do not freeze up like the cellidor models do from lack of maintenance. I love cellidor SAKs but ALOX get the nod for long term, severe use IMO.
Added Pic;
Farmer
-
I stand corrected.

Here's a Farmer in a standard size Altoids tin. Well... that would certainly be a very capable blade (and tool package) for emergencies.
I was certain I'd tested this before and couldn't get it to fit. However, I have in the past accidentally set the lanyard ring facing toward the outside of the tin with the 91mm, and caused problems with it fitting. So maybe that's what happened when I tested before? Or maybe I'm just old and forgetful?
-
LOL...I had to check again too!

-
Emergency knife will be any blade, a survival knife will be something you could used as a weapon, baton wood, skin game, etc.
A fixed blade around 8" of decent steel would be where you'd want your survival knife to be. For your emergency tin, pop in any SAK that'll fit or a razor/utility knife.
-
Hey, Lynn.
My favorite blade for an 'altoid tin' or similar kind of kit is the 84mm Alox Lumberjack, it may be a little pricey but it does most of the jobs a Farmer can do while in a smaller package(saw, blade and combo tool). Of course, if your kit has enough room to host Farmer, it's even better to handle.
If you want even thinner profile and just a decent knife, I would suggest SOG Micron 2.0 or Gerber LST are both pretty good options as well. I have tried small 'fixed blade' like the CRKT MK5 or the TOP Turley 23, but personally, I felt their handle and blade are both too small and I find myself more efficient with the folding slip joint/locking blade.
-
@Fattsgalore said:
Emergency knife will be any blade, a survival knife will be something you could used as a weapon, baton wood, skin game, etc.A fixed blade around 8" of decent steel would be where you'd want your survival knife to be. For your emergency tin, pop in any SAK that'll fit or a razor/utility knife.
+1 on the fixed blades. I have Carbon V SRK's/Ontario USMC's/BK-2s in my Emergency kits/bags as well. Each bag has an ALOX SAK Soldier and a Swiss Champ/Hercules/OHT as well.
-
Just tested different configuration of fitting a farmer into a standard altoid tin. There is no way a Farmer could be fitted in flush and nicely with the lanyard ring between the tin and the tool. But if the Farmer is fitted into the tin like shown in the picture, then it can almost fit in all the top to the top or bottom
There is no way to fit in the Farmer when with either the spring facing up or down.
Hope this helps, and on survival tin, I do often feel Altoid tin size is a tad too small to fit everything I need, and I usually prefer a small postcard tin instead.
-
@comis said:
My favorite blade for an 'altoid tin' or similar kind of kit is the 84mm Alox LumberjackNice. I can't even find one for sale, though. Checking SAK Wiki... yeah, discontinued. :/
Looks like a good choice, though.

I typed and removed three responses to the notion of longer fixed blades, but all seemed overly argumentative. So, instead let me just say you can skin game with a 58mm, you're better served with a 3' club than a knife for self defense, and I have never needed to baton wood to make a good fire (and I've made hundreds in the woods).
-
Yeah, but how ya gonna make ultra sophisticated alien traps with a 58mm


-
In the last few years, I've seen more and more people recommend the Vic Farmer as the most useful and convenient knife/multitool for the Altoids-tin mini survival kit. I would also choose that model. You can't go wrong with its blade, saw and reamer in an outdoor survival situation.
The '08 Soldier or Trekker would be even better, but they don't fit the Altoids tin.
-
The 58 mm Vics can be of use in a mini medic kit. You know, the small, clean blade that is used only for cutting gauzes and stuff. For example the alox Classic SD would be perfect. The whole knife can be cleaned with disinfecting agents, including the alox scales.
-
Pioneer or Cadet size would work.
If I wanted a locking blade, the smallest I would go would be a Spyderco Dragonfly but more than likely I would go with a Delica.
-
My survival kit is a bit more extensive, but it would enable me to survive something fairly major. It fits in a small fanny pack rather than a tin.
- emergency poncho
- space blanket
- bag with large trash bag (bivy bag/water carrier), large bandages, 20' paracord
- Victorinox Nomad
- metal case with lifeboat matches
- waterproof match case with strike-anywhere marches
- magnesium firestarter
- candle for fire starting
- Silva compass
- water purification tablets
- spare glasses
- loud whistle
- pill box with essential medicine
- metal signal mirror (not shown)
-
Like you said in a previous post, it's a calorie game. Can you field dress a deer and cut through his tendons and bones with a farmer? Sure, but why work harder than you need to when a 4.5" blade can make shorter, and safer work, of an animal? However, working smart instead of hard is the name of the game. Otherwise we would just pack ourselves and venture out into the woods to make stone and bone tools.
Personally, I would love to see someone here tackle bamboo with a saw. There is a reason nobody in the world uses a saw on bamboo, way too slow and too work intensive. You could, don't get me wrong, but then we are going right back to that "work smart" thing.
I'm glad you've never had to split wood before, but that is something I've had to do a lot, especially with bamboo. Can't just throw whole bamboo on the fire or it can explode. We also have to split it to make cordage, fish traps, spear guns, etc with it.
-
3" if a folder, 2" for a fixed.
-
@Lynn LeFey said:
@dmanuel said:
Personally, I would love to see someone here tackle bamboo with a saw.I'm in the midwest U.S. There is no bamboo here. Well, except some used in landscaping at the zoo.

Lol fair enough, we use it for everything here. I'm soaking it up as much as I can while I am here because there is a lot of bamboo at home in SE Texas/SW Louisiana. I'm hoping to learn which ones are edible, how to make permanent structures, and of course all the other tricks.
-
I'm fairly certain there are varieties of bamboo that WILL grow here, and I've seen it used for everything in Florida. Just never had to deal wit hit myself.
It's fair to say that survival kits WILL have to be tailored to your specific living location.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


