(Not) My Design for a Multitool
-
Here's the similar Craftsman Adjustable. This type is better on bolts.

-
Here's a Knipex with Aliigator Slip-Joint.

-
& this one may be the most useful of the bunch - the Knipex Plier Wrench

-
I'd like to see this head on that tool.
Me too Tom! Please let us know and post pictures when you get it finished.

Hey, I don't have the facilities to make this. Wait, I do have a machinist friend who might do this for me. Now you've got the gears turning, but this isn't my project!
Tom
-
-
@lonediver said:
I can believe that , it must be a result of all the milling around that they do, or could it be because they are hard pressed , maybe because they just lathe around a lot . :P:D
:D -
It seems like a common theme so far in this thread is that we would like to see a multitool based upon a channel-lock type adjustable plier. The only factory ones that I know of were made in France. The design evolved a bit between the late 1980's and now, but the tools themselves are definitely light-duty. Below is a picture of an example from Le Depanneur.
(If you look closely at the plier pivot, you can see the three different adjustment locations.)
What I'd really prefer in a mod is a multitool based on a beefy, medium-sized set of channel lock jaws.

-
Do you guys like this plier head? This again is the Knipex Plier Wrench.
From the website here: http://www.knipex.com/index.php?id=559&no_cache=1&L=1
A superior tool for gripping, holding and bending. Nuts and unions of all sizes up to 35 mm / 1 3/8" (86 03 180), 46 mm / 1 ¾" (86 03 250) and 60 mm / 2 3/8" (86 03 300) across flats can be tightened and released with the parallel gripping jaws. The cam action on the jaws allows ratchet action to operate over the hole range.
The smooth parallel jaws avoid damage to plated and soft fittings. The lever ratio is greater than 10 - 1 for strong gripping power.
Animation
http://www.knipex.com/index.php?id=451&L=1

-
That is pretty cool... I like that!
Def
-
I like the concept! (Although I've never tried one.) It seems like the perfect combination of plier and wrench type functions.
Are the jaw surfaces serrated at all? Or completely smooth?
-
The site says they are completely smooth. I have a 7" pair on order that should get here Tuesday. I don't know if they are very effective as a plier, but I'm hoping they are.
-
-
Knipex makes some really cool tools.
KNIPEX-"Cobra" ES http://www.knipex.com/index.php?id=783&L=1&grpID=61&ukat=rohr17&ukat_code=
SmartGrip (TM) http://www.knipex.com/index.php?id=783&L=1&grpID=61&ukat=rohr18&ukat_code=


-
Where did you order from?
-
@Tom Munch said:
I'd like the Knipex Plier Wrench head with the ratcheting bit driver & bits on one handle & a few tools in the other handle.The only thing this lacks is having the screwdriver & wrench/pliers separate for turning a screw while holding the nut.
I tried to do a mockup of this, but my Photoshop skills are lacking today.
My Photoshop skills leave a bit to be desired as well! (Please try not to notice the overlapping Phillips screwdriver!)
What I did was merge a Knipex plier-wrench head with a set of Kershaw multitool handles. I like how the Kershaw has a one-hand opening blade on the <u>outside</u> of the handle. The handle metal is folded so that it does not cut into the user's hand. I figure there should still be room for a 1/4" hex drive ratchet housed alongside the knife blade. All other files, blades, saws, etc would be in the opposite handle.
If you've ever carried a Kershaw, you are aware of the one significant downside of this arrangement: The plier head does not "fold up" into a more compact package, like on most other multitools. The entire tool is bigger and longer than many folks prefer to carry.
I think any multitool based upon the Knipex plier-wrench would be the same way.

-
I don't have a Kershaw so I can't say for certain, but wouldn't it be very awkward to use a knife with so much tool sticking out the opposite side?
Def
-
I'm EDC'ing a dedicated folder now, so I could live without a knife in there, but no manufacturer would leave one out.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





