Leatherman Leap
-
Nothing obvious...which would explain how they got out into the wilds before the recall.
I suspect someone somewhere reported they were able to remove the blade once it was installed.
-
The blade lock can release the blade. Does that mean let the blade close into the tool, or does the blade fall out off the tool?
Sounds like they probably mean the blade closes and the lock mech fails, but thats pretty sad that wasnt caught in testing.
-
so Guys, anyone have any info on when/whether we'll see any anytime soon ? the middle of november has been and gone :)
-
Late Boy Scout's boys talk about Leap.
https://www.youtube.com/watch?v=ox6Im0gABPc&list=UUZjvj5MN3BMxPFfdEKIrvxQ -
Statement from Leatherman regarding the recent Recall on this tool:
The issue with the Leap was only with the optional knife blade, not the full tool. We have an internal standard about how many pounds of pressure it should take before the knife blade (or any implement) slips past the liner lock. As we began production of the tool, we found that the Leap was not quite meeting this internal standard despite earlier testing. Obviously this would always be unacceptable, but because it’s a tool intended for younger users, it was especially so and we immediately enacted a voluntary recall with the CPSC. Luckily, not many had even reached retailer shelves by this point, and very few made it to consumers. Our engineers figured out the problem quickly, got it fixed so it was well above our standard, and got their solution approved by the CPSC. Again, the issue was only with the optional knife blade, so if you were just using the tool without the blade installed, they are completely safe.
The only affected products were sold during late August/early September. All affected product was pulled from shelves in September, so consumers should not be concerned that they might be buying the old version. Right now the new versions are just being stocked to shelves at places like Cabela’s, REI, and others. If folks are concerned about telling the difference, the old version has four bumps on the ridge of the knife blade, and the new version has three.
-
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
-
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'. -
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.Oh really.
Good thing I put away my Rebar with the long file for safe keeping.
I did not know the production was so low on those. Why did they snip those again? -
@captain spaulding said:
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.Oh really.
Good thing I put away my Rebar with the long file for safe keeping.
I did not know the production was so low on those. Why did they snip those again?Not sure, they never said why.

I have both versions and the difference is quite noticeable. I tried to figure out on my own why would have they done this but couldn't come to any logical explanation.
The original long file fits just nice and there are no obstructions (at least not the ones I could find), the 'new' file seems quite short for the handle cavity available. -
@captain spaulding said:
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.Oh really.
Good thing I put away my Rebar with the long file for safe keeping.
I did not know the production was so low on those. Why did they snip those again?Not sure, they never said why.

I have both versions and the difference is quite noticeable. I tried to figure out on my own why would have they done this but couldn't come to any logical explanation.
The original long file fits just nice and there are no obstructions (at least not the ones I could find), the 'new' file seems quite short for the handle cavity available.I have both and agree that I cannot figure out why they would do this.

-
@captain spaulding said:
@captain spaulding said:
[quote author=Lynn LeFey link=topic=54670.msg986247#msg986247 date=1416863093]
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.Oh really.
Good thing I put away my Rebar with the long file for safe keeping.
I did not know the production was so low on those. Why did they snip those again?Not sure, they never said why.

I have both versions and the difference is quite noticeable. I tried to figure out on my own why would have they done this but couldn't come to any logical explanation.
The original long file fits just nice and there are no obstructions (at least not the ones I could find), the 'new' file seems quite short for the handle cavity available.I have both and agree that I cannot figure out why they would do this.

[/quote]There was an official response in an older thread here.
</post/716763>
Of course, Duncan. It's kind of a long explanation, so bear with me. The original Rebar design (and the image you see on our website) had the angled file tip. Yours is a newer version.
When our machines pick up a punched out steel file piece, it's perfectly flat. The machine holds the file on both ends and then scores the file lines. After that, the end tip is cut off, so that the file scores go all the way to the end.
We modified the Rebar just slightly after our first couple of runs with the tool because we were finding that our machines weren't cutting off that tip properly every time, and we were having to scrap a percentage of our files. After speaking with users, it became clear that the angled tip of the file wasn't an important feature, so we decided to continue what has been successful for us in the past (for example, on our Super Tool and PST tools) and just cut the file off square.
We don't do this on some of our tools, such as our Wave, because the file tip needs to have a nail nick in there and is already kind of a strange shape.
-
Now I remember reading that thread.

-
Thanks for the info, Syph.
I like my Rebar with the original longer file even more now :)
That "upgraded" stubby file just doesn't look right, IMO

-
well, it's back up on the leatherman site -
http://www.leatherman.com/358.html#start=23
and seems to be available on knifecenter.com and cabelas . . . . whoo hooo -
Seems they rounded up the scissors too.
-
Anybody planning on getting one and has an older one to compare to?
I'd be curious to see what improvements they made or whether they just tweaked the lock face.
-
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.It's possibly a bad things that my one like that is a bit of a beater and mod fodder then!
-
@Lynn LeFey said:
Interesting. It also means the uber collectors will be able to tell if it was pre-recall. Which, I' guessing, will make those some of the most rare leatherman tools, now.
Yeah, you're possibly right.
Although from the collector's point of view in recent years for me personally it will be hard to beat the original first production series Rebar from 2012 with an XL file ;)
There's reportedly only few thousands of those ever made before it received the 'snip'.It's possibly a bad things that my one like that is a bit of a beater and mod fodder then!
I've hacked up quite a few and still haven't seen a short one.

-
Oh how did I miss this little bit of news? Looks like I am now on the hunt for short files on Rebars.

I quickly checked my 3, and they are all of the long file version. I have a Stainless, a BO, and a Texas Toolcrafter Gold.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login