What Did You Use Your Multitool For Today?

[AimlessWanderer]

My Sis-in-law was actually mocking me not only for having the tools and lights to fix it, but also for having standard domestic fuses in my EDC bag 

I'd have fixed the problem, declared what was needed to fix it, then pulled my fuse back out again and left. 

[New_World]

My Sis-in-law was actually mocking me not only for having the tools and lights to fix it, but also for having standard domestic fuses in my EDC bag 

I'd have fixed the problem, declared what was needed to fix it, then pulled my fuse back out again and left. 

..then calmly exclaimed, "A thank you would have been nice.........B*tch."

[AimlessWanderer]

My Sis-in-law was actually mocking me not only for having the tools and lights to fix it, but also for having standard domestic fuses in my EDC bag 

I'd have fixed the problem, declared what was needed to fix it, then pulled my fuse back out again and left. 

..then calmly exclaimed, "A thank you would have been nice.........B*tch."

I did get a full cooked dinner and a couple of drinks out of it as well, so I'll let her off this time   

[jerseydevil]

Used my new-to-me OHT today at work for the first time. What an awesome knife! I used every tool on it today (not necessarily in the way they were intended, but...). I kinda looked down on the 111mm Vics for a while, just thought they'd be too bulky for me. Now, I'm already plotting which one of the series to get next! 

[MTlitton]

skeletool to crack a brew after work

[edcgear]

Used my Wave (my favorite at the moment) to do some instalation work on FUCHS. Instaled a O/I manual switch on hydraulic lubricant cooler fan... So some wire stripping, cutting, fidling with screwdrivers... All works!!    Later on I've used a flat screwdriver/prybar on Wave to open cell's on battery to check acid level in them...

 

[myuusmeow]

Today I used a Surge to build an office chair: 

Straight blade and scissors to open the box and wraps
Pliers to tighten the hex screws



Also used the tiny bit driver to loosen my new glasses, was bored used them to take apart a mini calculator

[django.cj]

New ST300 was just used to install the rails for a new server into the rack.  Medium flathead held up well as a pry bar.

[MeadMaker]

I used the SC4 to disassemble a sprayer that clogged three times during a topcoat application.  Now the blade and scales have some Atomic Topcoat on them.  Getting it off will be a challenge  because this stuff is resistant to almost any chemical.  We've put sulphuric acid and drain cleaner on this stuff as a test and neither even dulled the gloss.

[Top-Gear-24]

Used the pressurized ballpoint pen on my Victorinox Swisschamp to write down the final standings from my families miniature golf game  .  And the scissors to cut some loose thread from my shirt  .

And I'm always looking like this  on such occasions ...

[Dunc]

My Gerber mp400 got used to pull a tooth from a dead 8 and a half foot long Porpoise so we could measure it's diameter

[nuphoria]

I used my KF4 this morning for my favourite thing; opening packages

[Reinier]

I used my KF4 this morning for my favourite thing; opening packages

+1
I used my small Tinker though

[Jmora]

My Gerber mp400 got used to pull a tooth from a dead 8 and a half foot long Porpoise so we could measure it's diameter

a photo would make some great publicity for Gerber...or maybe not

[Dunc]

My Gerber mp400 got used to pull a tooth from a dead 8 and a half foot long Porpoise so we could measure it's diameter

a photo would make some great publicity for Gerber...or maybe not

I havn't got a pic of the tooth being extracted but heres the Porpoise , and yes it did smell as bad as it looked 

[Carlos]

Used the scissors from the swisschamp to cut the smallest possible amount of hair from my kid, after he had stick a piece of gum in it. 

[Jmora]

My Gerber mp400 got used to pull a tooth from a dead 8 and a half foot long Porpoise so we could measure it's diameter

a photo would make some great publicity for Gerber...or maybe not

I havn't got a pic of the tooth being extracted but heres the Porpoise , and yes it did smell as bad as it looked 

(Image removed from quote.)

looks like its about to explode.

[edcgear]

Used my Wave with another pair of pliers to take off battery terminal from excavator. Bolt and nut were rusted and stuck... It needed some hard grip. At first I was afraid how Wave would stand to the job, but it was perfect...

[EZ822]

Put together a bookcase with the help of my LM Fuse.

[cerbera147]

I used my KF4 this morning for my favourite thing; opening packages

My UKPK normally gets package opening duties 

Although I have opened a few with my Ka Bar for the sake of overkill 

[Gadget Guy]

I used the diamond file on my Leatherman XE-6 to file a spot on my Emerson mini CQC-15 so the thumb disc would fit. It worked really well. Its the first time I really used the diamond file hard and it held up great. 

[powernoodle]

Extracted a stuck .22 casing from the chamber of a youth-sized bolt action rifle.  Were it not for the Juice CS4 I had in my pocket, I would still be sitting there staring at it and muttering potty words.

[New_World]

Extracted a stuck .22 casing from the chamber of a youth-sized bolt action rifle.  Were it not for the Juice CS4 I had in my pocket, I would still be sitting there staring at it and muttering potty words.

lol

[ivanov]

Today with help of 0.8461.MW04DE I opened a three-liter jar of pumpkin juice

[nuphoria]

Reached the end of my tether with the kids from the mosque next door today.
Apparently, Ramadan means "run riot and break in to everyone's gardens".

So, MT of choice was a SOG Powerlock - the compound leverage worked very nicely on the barbed wire I have just put round the bits of fencing they have destroyed.

[AimlessWanderer]

Reached the end of my tether with the kids from the mosque next door today.
Apparently, Ramadan means "run riot and break in to everyone's gardens".

So, MT of choice was a SOG Powerlock - the compound leverage worked very nicely on the barbed wire I have just put round the bits of fencing they have destroyed.

 

I was considering trading my Powerlock ... you just talked me out of it 

[Top-Gear-24]

Don't know if this counts, but I used my black "Now You're Ready" Leatherman T-Shirt to polish up my new Victorinox Spirit during a hike in the Ardennes forest  .

[airballrad]

My Pulse and Fenix LD10 assisted me in removing a misplaced picture hanger from the garbage disposal. 

Don't know if this counts, but I used my black "Now You're Ready" Leatherman T-Shirt to polish up my new Victorinox Spirit during a hike in the Ardennes forest  .

 

[turnsouth]

Don't know if this counts, but I used my black "Now You're Ready" Leatherman T-Shirt to polish up my new Victorinox Spirit during a hike in the Ardennes forest  .

It's amazing how many uses you can find for Leatherman products, even for cleaning "The Tool that Loves to Smudge"

[New_World]

used LM skeletool to open a coors light. Cheers!