What Did You Use Your Multitool For Today?

Corso · **Reply #3030 on:** July 30, 2012, 04:53:55 AM

Used today:

- Juice S2 to slice a bagel in half

- Surge braided line cutter to put new cables on a bike

- Sidekick main blade used to scrape labels off a plastic container

sergemaster · **Reply #3031 on:** July 30, 2012, 07:58:10 AM

Amici,
Used a Victorinox Champion to open up boxes of paper whilst at work..

Cheers,
Serge

THE_LONGBOW · **Reply #3032 on:** August 02, 2012, 01:43:05 AM

Used the Tweezers on my Leatherman PS to pull out a sliver. AHHHHhhhhh...

jerseydevil · **Reply #3033 on:** August 07, 2012, 11:20:35 PM

Used the can opener on my Huntsman to scratch off a lottery ticket, and won $10! Multitools for fun and profit!

Lynn LeFey · **Reply #3034 on:** August 08, 2012, 12:17:03 AM

Used the Spirit X to replace the innards of a toilet. Glamorous!

Bensasupertool · **Reply #3035 on:** August 08, 2012, 12:32:55 AM

The TU 47 was used to clean the dirt out under my nails before getting sized for a ring. Classy right. The chick next to me thought so.

trouthunter · **Reply #3036 on:** August 08, 2012, 02:48:52 AM

Used the Kick to replace the battery in the mini van today. Stupid mini van.

N_N_R · **Reply #3037 on:** August 08, 2012, 10:07:34 AM

The pliers of the PS4 came handy when I was untying one awful knot and the eye-glass screwdriver of the Micra was a perfect awl for punching a plastic bottle and making sth like a ... well.. ok, difficult to explain

New_World · **Reply #3038 on:** August 10, 2012, 07:50:03 AM

to take my antec 900 computer case apart.

used leatherman wave

turnsouth · **Reply #3039 on:** August 11, 2012, 01:43:43 AM

Used a Charge AL and a SwissTool to get the sump pump working again, stupid float guide picked today to break. They are drying now after I washed all the mucky basement scum off of them.

Dunc · **Reply #3040 on:** August 15, 2012, 02:10:10 PM

I used the scissors on my Gerber MP400 to cut a first aid dressing to the right size after my neighbours Daughter cut her finger.

Hypnos3510 · **Reply #3041 on:** August 15, 2012, 03:13:37 PM

I use a combination of juice xe6 and a surge to put together a bassinet for my nephew.

Sent from my LG-P925 using Tapatalk 2

JAfromMn · **Reply #3042 on:** August 16, 2012, 10:30:56 PM

Leatherman Blast and work tools I carry

Pulled staples small nails, cut molding, wired a plug in striped wire, flat head on plug in screw's tighten up a shower head and faucet, opened. + put together a miter box, pulled up some old carpet, pocketwrench 2 opened a few paint cans, did not use the chapman ratchet and bit kit I brought.

Vic Spirit lm micra and tt pocket chopper tonight

I opened a bag of chips with the spirit so far

derekmac · **Reply #3043 on:** August 18, 2012, 01:15:23 AM

Quote from: New_World on August 10, 2012, 07:50:03 AM

to take my antec 900 computer case apart.

used leatherman wave

Oooh, nice case!!

Today I used my MP800 to tighten up a few bolts on some racking at work.

trouthunter · **Reply #3044 on:** August 18, 2012, 02:19:02 AM

Used my Rebar to install my son's stereo in his truck

AimlessWanderer · **Reply #3045 on:** August 18, 2012, 09:26:47 PM

A few bits of DIY today, nothing too big.

Replaced some of the plumbing under the kitchen sink, and replaced the valves on the taps on the kitchen sink. Spirit can opener popped the caps off so the Spirit Phillips could remove the heads. Pioneer Harvester used to shorten one of the outlet pipes, and the awl used to put a cup hook inside the door for hanging a dustpan and brush. It needed opening up wider as the dustpan wouldn't hook on, but the Spirit pliers sorted that in a jiffy

Still need to track down (or improvise) a fitting for the overflow though

Bensasupertool · **Reply #3046 on:** August 19, 2012, 12:43:05 AM

The LM tools were on craft duty today with the girls. Center pieces for the wedding. One big field test of scissors. The Rustman,Squirt ps4,and Style Cs,Ps. The big winners were the Styles.The truly girlie verdict on the two others is the squirt is cute,and the rustman is big and dumb.

I myself repaired the parlor black iron lamp with the BO Fuse. Needed new guts.The 3way selector crapped out and I replaced it with a pull chain selector. also gave the rustman some love and used the clamshell tool on the new orange fuse clamshell package.

JAfromMn · **Reply #3047 on:** August 19, 2012, 01:00:19 AM

Yesterday I used LM Blast to pull some staples,remove screws-nails from walls I was painting. Chapman ratchet/bit's to take the locks of 10 windows, used pocketwrench 2 to open paint cans.

Today used Blast to strip some wire, my pocketwrench 2 to pry up some skirting on a trailer house. Then I lost it

Sucks I used my pocketwrench 2 a lot we finished the job installing that trailer so I won't be going back. I bet it's under the house

Did I say it SUCKS yet. SMURFF

I'm bummed it was a very handy tool.

AimlessWanderer · **Reply #3048 on:** August 19, 2012, 02:13:56 PM

Quote from: 50ft-trad on August 18, 2012, 09:26:47 PM

A few bits of DIY today, nothing too big.

Replaced some of the plumbing under the kitchen sink, and replaced the valves on the taps on the kitchen sink. Spirit can opener popped the caps off so the Spirit Phillips could remove the heads. Pioneer Harvester used to shorten one of the outlet pipes, and the awl used to put a cup hook inside the door for hanging a dustpan and brush. It needed opening up wider as the dustpan wouldn't hook on, but the Spirit pliers sorted that in a jiffy

Still need to track down (or improvise) a fitting for the overflow though

Done

Tracked one down, and the Spirit finished the job off

Kitchen repaired, time to move upstairs to repair a chest of drawers $:-\$

jerseydevil · **Reply #3049 on:** August 21, 2012, 01:58:46 PM

Used my PST II and Farmer to repair the starter pull on a power washer, and to unclog a tint machine. Gotta love the alox awl for clearing a clogged nozzle.

Lynn LeFey · **Reply #3050 on:** August 21, 2012, 10:56:06 PM

Used my Juice S2 to replace a light switch. I've never before heard of a light switch going bad, but apparently it happens. Huh.

And it looks like the ballast on our kitchen fluorescent light is about shot, so it'll be up on the repair list soon.

I think I'm due to receive my home repair badge any minute now.

Bensasupertool · **Reply #3051 on:** August 21, 2012, 11:31:00 PM

I used the BO PST knife to open a gerber curve package outside Dicks sporting goods today.my second gerber in 7 years.

JNieporte · **Reply #3052 on:** August 22, 2012, 01:21:06 AM

Used my Victorinox Manager and a bobby pin to pick a lock.
My daughter used her new Gerber Dime to tighten all of the screws in the house.

AimlessWanderer · **Reply #3053 on:** August 22, 2012, 01:40:26 AM

Quote from: JNieporte on August 22, 2012, 01:21:06 AM

Used my Victorinox Manager and a bobby pin to pick a lock.
My daughter used her new Gerber Dime to tighten all of the screws in the house.

Brilliant

Today my Yeoman and Octane merely served the purpose of making my trousers a little bit heavier

Heinz Doofenshmirtz · **Reply #3054 on:** August 22, 2012, 02:08:07 AM

Nothing too ambitious for me today... all I've done so far is use my CT Lite to open a medication package for my wife, and to tighten the screws of a few of the handles on the cabinets in the kitchen.

Corso · **Reply #3055 on:** August 22, 2012, 02:56:04 AM

Used my S2 to adjust a rear bicycle derailleur and tighten the clamp on the gear shift lever.

gcconspiracy · **Reply #3056 on:** August 22, 2012, 07:04:51 AM

Used my wave to pull an upholstery staple out of my wife's grandmother's favorite chair (it had been sticking out and stabbing her)... Brownie points!

spelling mistakes and misinformation courtesy of Tapatalk

Mercury · **Reply #3057 on:** August 22, 2012, 01:10:12 PM

I used the blade on my spirit x today to cut open lots of shrink rap. That's all my knives get used for lately, cutting shrink rap off of beer pallets at work. It sounds awesome cuz beer is involved, but I assure you this is the dullest use of a knife I can think of.

Bensasupertool · **Reply #3058 on:** August 22, 2012, 05:10:38 PM

Used the BO Fuse pliers to open the oil fill cap on the push mower then used to pull back the throttle a bit.

JAfromMn · **Reply #3059 on:** August 24, 2012, 12:54:34 AM

Pulled some staples and nails with my blast, opens paint cans with my pocket wrench and took of and put back some hinges and window locks. on after I cleaned them, scraped paint off windows with my scraper. No pic of that.

Hello Lurker! Remove this ad and much more by logging in.

What Did You Use Your Multitool For Today?

Donations

Community Links