Multitool.org Forum
+-

Hello Lurker! Remove this ad and much more by logging in.


Re-Introduction... Evil is back

us Offline evil510

  • Sr. Member
  • ****
    • Posts: 491
  • Envision. Create. Innovate.
Re-Introduction... Evil is back
on: June 16, 2011, 11:16:36 PM
Hey gang, Evil510 here again. Some of you may remember me and my various tool mods spread across these forums. It has been well over a half year since I have been here. Without going into any details, I have had many life changing issues here on my end. It is all about priorities. That said, my hobby of modifying multitools had to be put on the backburner. Things are somewhat back on track now, well, as good as they are going to get for the time being. At any rate, I am back, for now anyway. I hope I get some spare time to do more mods etc and share them with you all. I have so many posts to read and catch up on...

~ Evil ~


BTW: love the new look of the whole website. Great job!
« Last Edit: June 16, 2011, 11:35:55 PM by evil510 »
CURRENT PROJECTS:
Evil's Urban Trekker (on hold)
Shear Evil (on hold)
The Evil Incarnate (a work in progress)

UPDATES:
Evil's Quad Strop Mini introduced.....
Evil's Pocket Octo-Driver introduced.....
Brute Driver HD - COMPLETE

LATEST NEWS:




scotland Offline Gareth

  • Admin Team
  • Point Of No Return
  • *
    • Posts: 37,691
Re: Re-Introduction... Evil is back
Reply #1 on: June 16, 2011, 11:31:43 PM
Nice to see you back Evil. :cheers:
Be excellent to each other and always know where your towel is.


um Offline Mr. Whippy

  • Global Moderator
  • *
  • *
  • Zombie Apprentice
  • *
    • Posts: 12,208
  • North American Meetup: May13-15 2011
Re: Re-Introduction... Evil is back
Reply #2 on: June 16, 2011, 11:31:49 PM
Welcome back!

MT.O has been woefully short of Evil lately...


scotland Offline Nikos

  • No Life Club
  • ******
    • Posts: 3,785
  • Why is it doing that?
Re: Re-Introduction... Evil is back
Reply #3 on: June 16, 2011, 11:39:54 PM
Welcome back mate! Everyone, break out the poking sticks! :pok: :pok: :pok: :D


spam Offline Doraemon

  • Jr. Member
  • **
    • Posts: 92
  • A man can never have enough watches... and tools!
Re: Re-Introduction... Evil is back
Reply #4 on: June 17, 2011, 12:07:48 AM
Welcome back! I've seen many of your mod threads and they are amazing:salute:
You have the right tool... but do you know how to use it the right way?


hr Offline enki_ck

  • Global Moderator
  • *
  • Absolute Zombie Club
  • *
    • Posts: 20,935
  • I may get older but I refuse to grow up.
Re: Re-Introduction... Evil is back
Reply #5 on: June 17, 2011, 12:16:53 AM
I just did a quick search for your mods and i have to say YOU ROCK

I especially loved the skeletool

In hope of see some more great ideas, welcome back.


au Offline MultiMat

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 8,694
  • The MTO handshake.
Re: Re-Introduction... Evil is back
Reply #6 on: June 17, 2011, 01:15:29 AM
Great having you back mate  8) 8) 8) & glad things are settling down for you mate  :tu: :tu:.

Now into the workshop & get EVIL  :pok: :pok: :D :D :D

"Downunder Mod (that sounds dirty, doesn't it?)"
Yeh Baby :P >:D >:D


us Offline ari6126

  • No Life Club
  • ******
    • Posts: 1,620
  • Colors!
Re: Re-Introduction... Evil is back
Reply #7 on: June 17, 2011, 01:20:33 AM
Welcome back.


us Offline Pacu

  • *
  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,781
Re: Re-Introduction... Evil is back
Reply #8 on: June 17, 2011, 01:21:59 AM
great to see ya back  :cheers:
:like:    :MTO:




spam Offline scrappy

  • Turd Bucket
  • No Life Club
  • ******
    • Posts: 2,633
Re: Re-Introduction... Evil is back
Reply #9 on: June 17, 2011, 03:48:37 AM
Welcome back


us Offline Smitty44

  • No Life Club
  • ******
    • Posts: 2,026
Re: Re-Introduction... Evil is back
Reply #10 on: June 17, 2011, 06:31:38 AM
Welcome back,really enjoyed a lot of your old mods. :cheers:& :salute:


dk Offline AHB

  • Keeper Of The PowerCut
  • Admin Team
  • Zombie Apprentice
  • *
    • Posts: 16,951
  • Don't mistake lack of talent for genius.
Re: Re-Introduction... Evil is back
Reply #11 on: June 17, 2011, 06:40:07 AM
Great to have you back Evil, we were beginning to get a bit worried..  ;) :D


gb Offline Zed

  • *
  • Zombie Apprentice
  • ********
    • Posts: 19,555
Re: Re-Introduction... Evil is back
Reply #12 on: June 17, 2011, 06:44:35 AM
Welcome back evil  :tu:


cs Offline edcgear

  • No Life Club
  • ******
    • Posts: 3,570
Re: Re-Introduction... Evil is back
Reply #13 on: June 17, 2011, 06:58:12 AM
Welcome back...  :tu: :tu:
ΜΟΛΩΝ ΛΑΒΕ
There is method to my madness....
http://svakodnevnesitnice.blogspot.com/


us Offline prime77

  • No Life Club
  • ******
    • Posts: 2,887
Re: Re-Introduction... Evil is back
Reply #14 on: June 17, 2011, 07:31:43 AM
Welcome back to the forum.
"


gb Offline Sparky415

  • Zombie Apprentice
  • ********
    • Posts: 13,000
Re: Re-Introduction... Evil is back
Reply #15 on: June 17, 2011, 10:36:46 AM


  :pok: :twak:  Don't do it again!

Good to see you (and your tools) back again!   :D  :cheers:
Everything’s adjustable


us Offline evil510

  • Sr. Member
  • ****
    • Posts: 491
  • Envision. Create. Innovate.
Re: Re-Introduction... Evil is back
Reply #16 on: June 18, 2011, 12:23:08 AM
Hey gang. Thank you all for the warm welcome back.....

Mr. Whippy, don't think Evil has forgotten them scissors you gifted for his first ever 111mm SAK project. It is up towards the top of my list of projects to get underway. I always give credit where credit is due.....

To all of those that have sent me PM's over the past half year in regard to projects, etc... I never got e-mail notifications of them and read all of them for the first time yesterday and will be replying to them very soon.....

In trying to catch up on my old threads, I realized many of them have gone unanswered or commented on by me since I have been gone. I also found various posts, unrelated to mine, where I was referred to or asked questions. I will tend to those as well and bring them up to speed.....

That said, let the evilness begin... again

~ evil ~
« Last Edit: June 18, 2011, 12:26:01 AM by evil510 »
CURRENT PROJECTS:
Evil's Urban Trekker (on hold)
Shear Evil (on hold)
The Evil Incarnate (a work in progress)

UPDATES:
Evil's Quad Strop Mini introduced.....
Evil's Pocket Octo-Driver introduced.....
Brute Driver HD - COMPLETE

LATEST NEWS:




il Offline Threeme2189

  • No Life Club
  • ******
    • Posts: 2,021
  • When in doubt, use a bigger hammer.
Re: Re-Introduction... Evil is back
Reply #17 on: June 18, 2011, 08:52:32 PM
It's great to see you back Evil, I have enjoyed seeing your amazing craftsmanship in older threads and I look forward to more :D

All of your threads are worthless without pics!!! :pok: :pok:
Chuck Norris' preferred iron supplement is rebar.


gb Offline Craig

  • *
  • No Life Club
  • ******
    • Posts: 2,661
Re: Re-Introduction... Evil is back
Reply #18 on: June 20, 2011, 07:40:50 PM
Welcome back Evil  :tu:
Prone to daydreaming.


gb Offline nuphoria

  • Ambidangerous Mistress of Mod
  • Admin Team
  • *
  • Zombie Apprentice
  • *
    • Posts: 15,038
  • I'm not all bad, I'm just drawn that way.
Re: Re-Introduction... Evil is back
Reply #19 on: June 21, 2011, 02:22:21 AM
Hurrah.... more glorious mods please :D
A dyslexic man walks in to a bra...

All my music for free: http://soundcloud.com/chrissyvandyke


us Offline Outback in Idaho

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 5,429
  • Not all those who wander are lost.
Re: Re-Introduction... Evil is back
Reply #20 on: August 05, 2011, 07:34:52 AM
Hey gang, Evil510 here again. Some of you may remember me and my various tool mods spread across these forums. It has been well over a half year since I have been here. Without going into any details, I have had many life changing issues here on my end. It is all about priorities. That said, my hobby of modifying multitools had to be put on the backburner. Things are somewhat back on track now, well, as good as they are going to get for the time being. At any rate, I am back, for now anyway. I hope I get some spare time to do more mods etc and share them with you all. I have so many posts to read and catch up on...

~ Evil ~


BTW: love the new look of the whole website. Great job!

I was just about to post a "Where is Evil510!?!" when I did a search to see if had missed a post. Thought maybe your inventions made you famous and some corporation hired you on for a new tool! Welcome Back mate!  :D
¬ Outback Idaho

Behind every mask there is a face, behind that a story.


us Offline evil510

  • Sr. Member
  • ****
    • Posts: 491
  • Envision. Create. Innovate.
Re: Re-Introduction... Evil is back
Reply #21 on: August 06, 2011, 02:19:44 PM
A belated thank you for all of the welcome back greetings that I missed. It has been a very slow start thus far since being back. I am looking forward to finishing up on some old projects and creating some new ones as well. The ongoing bit project has pretty much come full circle and I just posted pics of it. Project Style CS still needs to be completed. I lost the tweezers for them and at the time, lost interest. I am currently making a new blade for Project Skeletool as well as my new project dubbed Evil's Urban Trekker. The "pocket knife with no name" project has been done for quite a while now... other than coming up with a name for it and doing the engraving. I'll post pics once I get around to taking some. I have a few other projects that I still need to complete as well. Now that I am back, this time around I realize that I don't have nearly as much time to devote to my projects as I did in the past. At any rate, it is good to be back.....

~ evil ~
CURRENT PROJECTS:
Evil's Urban Trekker (on hold)
Shear Evil (on hold)
The Evil Incarnate (a work in progress)

UPDATES:
Evil's Quad Strop Mini introduced.....
Evil's Pocket Octo-Driver introduced.....
Brute Driver HD - COMPLETE

LATEST NEWS:




dk Offline AHB

  • Keeper Of The PowerCut
  • Admin Team
  • Zombie Apprentice
  • *
    • Posts: 16,951
  • Don't mistake lack of talent for genius.
Re: Re-Introduction... Evil is back
Reply #22 on: August 06, 2011, 02:24:34 PM
I am currently making a new blade for Project Skeletool
~ evil ~

2HO hopefully..  :ahhh :ahhh

*Fingers Crossed*  :D


us Offline evil510

  • Sr. Member
  • ****
    • Posts: 491
  • Envision. Create. Innovate.
Re: Re-Introduction... Evil is back
Reply #23 on: August 06, 2011, 02:38:54 PM
I am currently making a new blade for Project Skeletool
~ evil ~

2HO hopefully..  :ahhh :ahhh

*Fingers Crossed*  :D
2HO, lol no, not quite... but it puts the 154CM blade to shame on all levels. It is considerably longer, thicker and stronger. (get your minds out of the gutter people, we're talking about a blade lol) Of course I had to create a wicked looking thumbstud for it as well..... ;)
CURRENT PROJECTS:
Evil's Urban Trekker (on hold)
Shear Evil (on hold)
The Evil Incarnate (a work in progress)

UPDATES:
Evil's Quad Strop Mini introduced.....
Evil's Pocket Octo-Driver introduced.....
Brute Driver HD - COMPLETE

LATEST NEWS:




us Offline sawman

  • *
  • Absolutely No Life Club
  • *******
    • Posts: 9,745
  • You're amongst friends.
Re: Re-Introduction... Evil is back
Reply #24 on: October 14, 2011, 06:53:10 PM
It was awfully sad when you dropped off.  I wasn't sure if/when you would be back but it's great that you are.  Welcome back buddy and I greatly enjoy your mods  :tu:
SAW


 

Donations

Operational Funds

Help us keep the Unworkable working!
Donate with PayPal!
April Goal: $300.00
Due Date: Apr 30
Total Receipts: $42.16
PayPal Fees: $2.92
Net Balance: $39.24
Below Goal: $260.76
Site Currency: USD
 13%
April Donations

Community Links


Powered by EzPortal