Skinth Shields!

[lowtech]

Aaargh!

It has happened again.
I just wanted a new sheath for my Spirit. Now that i have the really nice M -shield, I´m looking for something to fill the spare room. I am thinking about either getting a pen or a light or a mini ratchet to fill the gap beside the spirit.

Any ideas on items of these kinds that are about as long as the spirit?

ATM my EDC pen is an Uni Ball Power Tank. It´s cheap and will write upside down and in the wet. Sadly, It´s longer than the Spirit.
My Maglite solitaire (yes, it´s outdated, but not so much with the nice LED Drop in) is a bit short and will slip too far into the Skinth.
Any ideas if the Vic ratchet might fit beside? Anybody owns this Combo and cares to do a pic?

I did already order a flat prybar/wrench tool for the front pocket that might prove useful when holding a nut and tightening/loosening a bolt with the spirit.

Sorry for getting OT.

[Metropolicity]

You need to get a Space Bullet Pen, with the clip super glued on. It fits PERFECTLY next to the Spirit.

If you are rocking a BO Spirit, it comes in blank Tini coating.

As for tools for the front, a Pirahana fits nearly perfectly, but a Pocket Wrench 2 is a cheaper alternative.

[Waterlander]

Vic Alox Solo

[lowtech]

Thanks for the info. I´ll keep my eyes open for a bullet space pen, but until now i was not willing to spend that much on a Pen anymore. I used to buy Lamy and Rotring Pens and they got lost or "borrowed" away. But maybe i`ll bite the bullet and try to hang on to that pen like i do with my Multi.

My Spirit is the shiny version.

I Did not find a Pocket wrench in Germany and th Piranha seems a bit thick, isnt it?

For now i bought a cheap Chinese one piece tool.

http://www.ebay.de/itm/261082610551?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

It has a few Metric holes to hold nuts while (un)fastening them with the tool and fits the pouch nicely (although it´s a bit short so i will have to put a lanyard on)

Man, this forum had me buy more stuff than i thought....

But on the other hand, now i have a nice Gerber MT 600 and a Spirit with fitting pouch so i can rotate my EDC tools a bit...

[Metropolicity]

Thanks for the info. I´ll keep my eyes open for a bullet space pen, but until now i was not willing to spend that much on a Pen anymore. I used to buy Lamy and Rotring Pens and they got lost or "borrowed" away. But maybe i`ll bite the bullet and try to hang on to that pen like i do with my Multi.

My Spirit is the shiny version.

I Did not find a Pocket wrench in Germany and th Piranha seems a bit thick, isnt it?

For now i bought a cheap Chinese one piece tool.

http://www.ebay.de/itm/261082610551?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

It has a few Metric holes to hold nuts while (un)fastening them with the tool and fits the pouch nicely (although it´s a bit short so i will have to put a lanyard on)

Man, this forum had me buy more stuff than i thought....

But on the other hand, now i have a nice Gerber MT 600 and a Spirit with fitting pouch so i can rotate my EDC tools a bit...

Put a lanyard in the nut holes and move it over when you need the right size.

You should be able to find the pirahna soon for order on the LM website.

It's not too wide, it's almost perfect.