Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
+-

Hello Lurker! Remove this ad by logging in.


the tool with no name ! (yet) 19804

No Life Club Posts: 1,103
Re: the tool with no name ! (yet)
« Reply #30 on: October 09, 2013, 03:47:21 PM »
Great design idea and development guys, well done indeed.

Just requires a slot for tritium   :D
Hero Member Posts: 532
Re: the tool with no name ! (yet)
« Reply #31 on: November 08, 2013, 10:27:02 PM »
Thanks Guys,

Time for an update; got the revised jigsaw holder back a few days ago and it works perfectly.
I did discover something new however and that is that the wave clip slot is a slightly different size to the charge. It doesn't mean the holder won't fit but it does mean a bit of filing is needed down one edge of the interface clip, not the end of the world though and in the charge it fits like a glove.









As you can see i got a bit carried away and painted the text to make it clearer and stand out.





I'll have to have a think about how to proceed with these.

Pictures of most of my work can be found on my Facebook Page.
Also have a look at my Shapeways Shop and SW Torch Shop for 3D printed items.
No Life Club Posts: 2,666
Re: the tool with no name ! (yet)
« Reply #32 on: November 08, 2013, 10:37:03 PM »
looking good Peter !
thanks for the update, Xmas is coming ;)
Global Moderator Absolutely No Life Club Posts: 19,999 I may get older but I refuse to grow up.
Re: the tool with no name ! (yet)
« Reply #33 on: November 08, 2013, 11:14:54 PM »
Looks cool. 8)

Do you think you could find someone to make them for you at a more affordable price than Shapeways? You could sell them through EDCS as Bob did with the saws. 
Administrator Absolutely No Life Club Posts: 10,738 I am geek, hear me code
Re: the tool with no name ! (yet)
« Reply #34 on: November 09, 2013, 11:50:57 AM »
"klip-sawz" ?


Listen to our Metal Radio Show: https://www.mixcloud.com/sexto9
No Life Club Posts: 2,046
Re: the tool with no name ! (yet)
« Reply #35 on: November 22, 2013, 07:29:05 AM »
Nice. How about one that clips into a Leatherman Bit Driver (so the end would be like the end of a bit driver extender)?

No Life Club Posts: 2,011
Re: the tool with no name ! (yet)
« Reply #36 on: November 22, 2013, 12:05:09 PM »
Wouldn't that just fall straight out as soon as you pulled it?
No Life Club Posts: 2,666
Re: the tool with no name ! (yet)
« Reply #37 on: November 22, 2013, 12:27:59 PM »
Nice. How about one that clips into a Leatherman Bit Driver (so the end would be like the end of a bit driver extender)?

Wouldn't that just fall straight out as soon as you pulled it?
Peter thought of all those issues ! clever dude that he is  :whistle:
No Life Club Posts: 2,011
Re: the tool with no name ! (yet)
« Reply #38 on: November 22, 2013, 07:36:52 PM »
Hold on a mo...

Peter's design deals with the falling out issue because it locks in to the locking tab. The bit driver has no locking tab so one that fitted in to the bit driver would just fall out wouldn't it?
No Life Club Posts: 3,021 Smurf it!
Re: the tool with no name ! (yet)
« Reply #39 on: November 22, 2013, 08:05:39 PM »
Why do I have the irrational urge to buy one of these for my Surge?

"Success consists of going from failure to failure without loss of enthusiasm." - Winston Churchill
"Attitude is a little thing that makes a big difference." -  Winston Churchill
"The problem with socialism is that you eventually run out of other peoples' money" - Margaret Thatcher
"I seem to smell the stench of appeasement in the air." - Margaret Thatcher
No Life Club Posts: 2,666
Re: the tool with no name ! (yet)
« Reply #40 on: November 22, 2013, 08:36:02 PM »
any news on availability Peter ? (impatient aren't I  :whistle:)
No Life Club Posts: 2,046
Re: the tool with no name ! (yet)
« Reply #41 on: November 22, 2013, 09:57:41 PM »
Wouldn't that just fall straight out as soon as you pulled it?
The bit holder on my Skele has a little latch to keep bits in place but yes, they will come out with some force - and given most jigsaw blades work on the pull stroke you would have to be careful.
Having said that, people have modded jigsaw blades to go straight into bit holders.

Hero Member Posts: 532
Re: the tool with no name ! (yet)
« Reply #42 on: November 25, 2013, 06:57:57 PM »
I've just ordered a small number of these (5) so some should be available just before christmas possibly.

I don't know of any other manufacturing process that could produce these parts in the overall shape and cavity layout required, other than 3D printing. Also as far as i know Shapeways are the cheapest provider of stainless printed material there is, so for now they're pretty much the only choice.

The Skeletool bit holder is a possibility as the side clip would help retain it, however it doesn't hold the bits in completely securely as they can be pulled out by hand even with the clip engaged.

Pictures of most of my work can be found on my Facebook Page.
Also have a look at my Shapeways Shop and SW Torch Shop for 3D printed items.
OCD Squad Member Global Moderator Absolutely No Life Club Posts: 9,979
Re: the tool with no name ! (yet)
« Reply #43 on: December 04, 2013, 11:12:42 AM »
I've just ordered a small number of these (5) so some should be available just before christmas possibly.

I don't know of any other manufacturing process that could produce these parts in the overall shape and cavity layout required, other than 3D printing. Also as far as i know Shapeways are the cheapest provider of stainless printed material there is, so for now they're pretty much the only choice.

The Skeletool bit holder is a possibility as the side clip would help retain it, however it doesn't hold the bits in completely securely as they can be pulled out by hand even with the clip engaged.
I'm looking forward to this, might have to get me one for... wait I don't have a reason but then I don't need one. I really love this project.

Name Suggestions:
Jiggsawjiggle
Jiggsaw-Juggler

Emergency Kit: Ovo Sport, chocolate, cheese, crispbread and a coin
Admin Team Absolute Zombie Club Posts: 23,280
Re: the tool with no name ! (yet)
« Reply #44 on: January 20, 2014, 05:37:52 AM »
Excellent bit of engineering work there Peter! :tu: (sorry it took so long for me to notice this thread) Have there been any further developments on this project? :)

In order to be certain of having the right tool for every job.........one must first acquire a lot of tools
No Life Club Posts: 3,532 Apparently it is possible to have too many tools;)
Re: the tool with no name ! (yet)
« Reply #45 on: January 20, 2014, 05:42:26 AM »
Excellent bit of engineering work there Peter! :tu: (sorry it took so long for me to notice this thread) Have there been any further developments on this project? :)

I'm also interested in buying (a finished) one  :tu:

babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."
Hero Member Posts: 532
Re: the tool with no name ! (yet)
« Reply #46 on: January 22, 2014, 10:37:41 AM »
Thanks Guys,
There are 3 Jigsaw Holders up on EDCSource right now:
http://www.edcsource.com/...uction_id,auction_details
These probably won't be the last but i can't say when some will next be available.

Pictures of most of my work can be found on my Facebook Page.
Also have a look at my Shapeways Shop and SW Torch Shop for 3D printed items.
No Life Club Posts: 3,532 Apparently it is possible to have too many tools;)
Re: the tool with no name ! (yet)
« Reply #47 on: January 22, 2014, 01:10:19 PM »
Thanks Guys,
There are 3 Jigsaw Holders up on EDCSource right now:
http://www.edcsource.com/...uction_id,auction_details
These probably won't be the last but i can't say when some will next be available.

Thanks Tofty. :tu:  There are now 2 left.  Please make mine to suit a LM Charge.

babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."
Hero Member Posts: 532
Re: the tool with no name ! (yet)
« Reply #48 on: January 24, 2014, 10:02:15 AM »
Thanks a lot Greg,
I'll try and get it in the post for you tomorrow.

Pictures of most of my work can be found on my Facebook Page.
Also have a look at my Shapeways Shop and SW Torch Shop for 3D printed items.
Hero Member Posts: 532
Re: the tool with no name ! (yet)
« Reply #49 on: February 14, 2014, 11:31:11 AM »
Just a reminder that the Jigsaw Holders will be up on EDCSource for just a few more days, after that i'll be doing something different with them.
Link: http://www.edcsource.com/...uction_id,auction_details

Pictures of most of my work can be found on my Facebook Page.
Also have a look at my Shapeways Shop and SW Torch Shop for 3D printed items.
Newbie Posts: 33
Re: the tool with no name ! (yet)
« Reply #50 on: February 22, 2014, 11:47:44 PM »
can't you make one to fit in the MUT?
soi can get rid of the carbon scraper and replace it with a replaceble saw!!
 :multi:

"if you haven't got a screw loose somewhere, you are probably wound too tight"
Jr. Member Posts: 68 N0
Re: the tool with no name ! (yet)
« Reply #51 on: February 02, 2015, 04:49:34 AM »
Got one. Gold. Stupid M3 x 6mm are inexpensive enough. Then they want $10 for shipping.
Jr. Member Posts: 68 N0
Re: the tool with no name ! (yet)
« Reply #52 on: February 02, 2015, 04:48:04 PM »
Could have put a couple trits on it with all this extra real estate.
Jr. Member Posts: 68 N0
Re: the tool with no name ! (yet)
« Reply #53 on: February 02, 2015, 04:49:04 PM »
Newbie Posts: 23
Re: the tool with no name ! (yet)
« Reply #54 on: July 23, 2015, 12:18:30 PM »
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?  :D

I dont mind if I have to fettle a little with the charge model!  :)

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!
No Life Club Posts: 3,532 Apparently it is possible to have too many tools;)
Re: the tool with no name ! (yet)
« Reply #55 on: July 23, 2015, 12:29:37 PM »
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?  :D

I dont mind if I have to fettle a little with the charge model!  :)

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ?  In case he doesn't see this thread.

babola: "Enjoy your tools and don't be afraid to air your opinion and feelings here, but do it in courteous and respectable way toward others, of course."
OCD Squad Member Global Moderator Absolutely No Life Club Posts: 9,979
Re: the tool with no name ! (yet)
« Reply #56 on: July 23, 2015, 12:35:23 PM »
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?  :D

I dont mind if I have to fettle a little with the charge model!  :)

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ?  In case he doesn't see this thread.
Links are in Toftys signature

Tool with no Name

Emergency Kit: Ovo Sport, chocolate, cheese, crispbread and a coin
Newbie Posts: 23
Re: the tool with no name ! (yet)
« Reply #57 on: July 23, 2015, 12:38:46 PM »
Ah I seem to be reviving a dead thread here but -

These look amazing and I'd love one for my wave. Are there any still available to purchase or indeed to be made?  :D

I dont mind if I have to fettle a little with the charge model!  :)

I have to be honest - I'm part of many other forums for many other things (I'm a keen guitarist etc) and I've never known ingenuity and innovation like it!

Maybe send a PM to Tofty and ask him where these are currently at ?  In case he doesn't see this thread.
Links are in Toftys signature

Tool with no Name

Thanks for that! On it now! :)
Hero Member Posts: 758 adm.slc@icloud.com
Re: the tool with no name ! (yet)
« Reply #58 on: September 10, 2015, 04:59:46 AM »
I like what I see here.  :gimme: :gimme:
No Life Club Posts: 4,527 Master LM Squirt Ps4 And Lord of Navitools
Re: the tool with no name ! (yet)
« Reply #59 on: December 12, 2016, 05:54:52 AM »
 :drool: :drool: :drool: :drool: :drool: :drool: :drool: :drool: :gimme: :gimme: :gimme: :gimme:


 

Operational Funds

Keep the Unworkable working! Donate with PayPal!
June Goal: $275.00
Due Date: Jun 30
Total Receipts: $600.10
PayPal Fees: $35.45
Net Balance: $564.65
Above Goal: $289.65
Site Currency: USD
205% 
June Donations

Community Links

Powered by EzPortal
© 2017 Defender Web & Tool